Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMulti-kV class $beta$-Ga$_2$O$_3$ MESFETs with a Lateral Figure of Merit up to 355 MW/cm$^2$
74
0
0.0
(
0
)
Added by
Arkka Bhattacharyya
Publication date
2021
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
We demonstrate over 3 kV gate-pad-connected field plated (GPFP) $beta$-Ga$_2$O$_3$ lateral MESFETs with high lateral figure of merit (LFOM) using metalorganic vapor phase epitaxy (MOVPE) grown channel layers and regrown ohmic contact layers. Using an improved low-temperature MOVPE selective area epitaxy process, we show that a total contact resistance to the channel as low as 1.4 $Omega$.mm can be achieved.The GPFP design adopted here using PECVD (plasma-enhanced chemical vapor deposition) deposited SiN$_x$ dielectric and SiN$_x$/SiO$_2$ wrap-around passivation exhibits up to ~14% improved R$_{ON}$, up to ~70% improved breakdown voltage (V$_{BR}$ = V$_{DS}$ - V$_{GS}$) resulting in up to $sim$3$times$ higher LFOM compared to non-FP $beta$-Ga$_2$O$_3$ lateral MESFETs. The V$_{BR}$ (~2.5 kV) and LFOM (355 MW/cm$^2$) measured simultaneously in our GPFP $beta$-Ga$_2$O$_3$ lateral MESFET (with L$_{GD}$ = 10 $mu$m) is the highest value achieved in any depletion-mode $beta$-Ga$_2$O$_3$ lateral device.
rate research
Read More
$beta$-Ga$_2$O$_3$ is a next-generation ultra wide bandgap semiconductor (E$_g$ = 4.8 eV to 4.9 eV) that can be homoepitaxially grown on commercial substrates, enabling next-generation power electronic devices among other important applications. Analyzing the quality of deposited homoepitaxial layers used in such devices is challenging, in part due to the large probing depth in traditional x-ray diffraction (XRD) and also due to the surface-sensitive nature of atomic force microscopy (AFM). Here, a combination of evanescent grazing-incidence skew asymmetric XRD and AFM are investigated as an approach to effectively characterize the quality of homoepitaxial $beta$-Ga$_2$O$_3$ layers grown by molecular beam epitaxy at a variety of Ga/O flux ratios. Accounting for both structure and morphology, optimal films are achieved at a Ga/O ratio of $sim$1.15, a conclusion that would not be possible to achieve by either XRD or AFM methods alone. Finally, fabricated Schottky barrier diodes with thicker homoepitaxial layers are characterized by $J-V$ and $C-V$ measurements, revealing an unintentional doping density of 4.3 $times$ 10$^{16}$ cm$^{-3}$ - 2 $times$ 10$^{17}$ cm$^{-3}$ in the epilayer. These results demonstrate the importance of complementary measurement methods for improving the quality of the $beta$-Ga$_2$O$_3$ homoepitaxial layers used in power electronic and other devices.
We report on the demonstration of metalorganic vapor phase epitaxy-regrown (MOVPE) ohmic contacts in an all MOVPE-grown $beta$-Ga$_2$O$_3$ metal-semiconductor field effect transistor (MESFET). The low-temperature (600$^{circ}$C) heavy (n$^{+}$) Si-doped regrown layers exhibit extremely high conductivity with sheet resistance of 73 $Omega$/$square$ and record low metal/n$^{+}$-Ga$_2$O$_3$ contact resistance of 80 m$Omega$.mm and specific contact resistivity of 8.3$times$10$^{-7}$ $Omega$.cm$^{2}$ were achieved. The fabricated MESFETs exhibit a maximum drain-to-source current of 130 mA/mm, a high I$_{ON}$/I$_{OFF}$ of $>$10$^{10}$ with a high power FOM of 25 MW/cm$^{2}$ were achieved without any field plates. Nanoparticle-assisted Raman thermometry, thermal modeling, and infrared thermography were performed to assess the device self-heating under the high current and power conditions. This demonstration shows the promise of MOVPE technique for the realization of high-performance lateral $beta$-Ga$_2$O$_3$ devices and also highlights the need for device-level thermal management.
$beta$-Ga$_2$O$_3$ is an ultra-wide bandgap semiconductor and is thus expected to be optically transparent to light of sub-bandgap wavelengths well into the ultraviolet. Contrary to this expectation, it is found here that free electrons in n-doped $beta$-Ga$_2$O$_3$ absorb light from the IR to the UV wavelength range via intra- and inter-conduction band optical transitions. Intra-conduction band absorption occurs via an indirect optical phonon mediated process with a $1/omega^{3}$ dependence in the visible to near-IR wavelength range. This frequency dependence markedly differs from the $1/omega^{2}$ dependence predicted by the Drude model of free-carrier absorption. The inter-conduction band absorption between the lowest conduction band and a higher conduction band occurs via a direct optical process at $lambda sim 349$ nm (3.55 eV). Steady state and ultrafast optical spectroscopy measurements unambiguously identify both these absorption processes and enable quantitative measurements of the inter-conduction band energy, and the frequency dependence of absorption. Whereas the intra-conduction band absorption does not depend on light polarization, inter-conduction band absorption is found to be strongly polarization dependent. The experimental observations, in excellent agreement with recent theoretical predictions for $beta$-Ga$_2$O$_3$, provide important limits of sub-bandgap transparency for optoelectronics in the deep-UV to visible wavelength range, and are also of importance for high electric field transport effects in this emerging semiconductor.
Gallium oxide films were grown by HVPE on (0001) sapphire substrates with and without $alpha$-Cr$_2$O$_3$ buffer produced by RF magnetron sputtering. Deposition on bare sapphire substrates resulted in a mixture of $alpha$-Ga$_2$O$_3$ and $epsilon$-Ga$_2$O$_3$ phases with a dislocation density of about $2cdot10^{10}$ cm$^{-2}$. The insertion of $alpha$-Ga$_2$O$_3$ buffer layers resulted in phase-pure $alpha$-Ga$_2$O$_3$ films and a fourfold reduction of the dislocation density to $5 cdot 10^9$ cm$^{-2}$.
The epitaxial growth of technically-important $beta$-Ga$_2$O$_3$ semiconductor thin films have not been realized on flexible substrates due to limitations by the high-temperature crystallization conditions and the lattice-matching requirements. In this report, for the first time single crystal $beta$-Ga$_2$O$_3$(-201) thin films is epitaxially grown on the flexible CeO2 (001)-buffered hastelloy tape. The results indicate that CeO$_2$ (001) has a small bi-axial lattice mismatch with $beta$-Ga$_2$O$_3$ (-201), thus inducing a simultaneous double-domain epitaxial growth. Flexible photodetectors are fabricated based on the epitaxial $beta$-Ga$_2$O$_3$ coated tapes. Measurements show that the obtained photodetectors have a responsivity of 40 mA/W, with an on/off ratio reaching 1000 under 250 nm incident light and 5 V bias voltage. Such photoelectrical performance is already within the mainstream level of the $beta$-Ga$_2$O$_3$ based photodetectors by using the conventional rigid single crystal substrates; and more importantly remained robust against more than 1000 cycles of bending tests. In addition, the epitaxy technique described in the report also paves the way for the fabrication of a wide range of flexible epitaxial film devices that utilize the materials with lattice parameters similar to $beta$-Ga$_2$O$_3$, including GaN, AlN and SiC.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
