No Arabic abstract
The geometry of the inner accretion flow in the hard and hard-intermediate states of X-ray binaries remains controversial. Using NICER observations of the black hole X-ray binary MAXI J1820+070 during the rising phase of its 2018 outburst, we study the evolution of the timing properties, in particular the characteristic variability frequencies of the prominent iron K$alpha$ line. Using frequency-resolved spectroscopy, we find that reflection occurs at large distances from the Comptonizing region in the bright hard state. During the hard- to soft transition, the variability properties suggest the reflector moves closer to the X-ray source. In parallel, the peak of the iron line shifts from 6.5 to ~7 keV, becoming consistent with that expected of from a highly inclined disc extending close to the black hole. We additionally find significant changes in the dependence of the root-mean-square (rms) variability on both energy and Fourier frequency as the source softens. The evolution of the rms-energy dependence, the line profile, and the timing properties of the iron line as traced by the frequency-resolved spectroscopy all support the picture of a truncated disc/inner flow geometry.
We study X-ray spectra from the outburst rise of the accreting black-hole binary MAXI J1820+070. We find that models having the disk inclinations within those of either the binary or the jet imply significant changes of the accretion disk inner radius during the luminous part of the hard spectral state, with that radius changing from $>$100 to $sim$10 gravitational radii. The main trend is a decrease with the decreasing spectral hardness. Our analysis requires the accretion flow to be structured, with at least two components with different spectral slopes. The harder component dominates the bolometric luminosity and produces strong, narrow, X-ray reflection features. The softer component is responsible for the underlying broader reflection features. The data are compatible with the harder component having a large scale height, located downstream the disk truncation radius, and reflecting mostly from remote parts of the disk. The softer component forms a corona above the disk up to some transition radius. Our findings can explain the changes of the characteristic variability time scales, found in other works, as being driven by the changes of the disk characteristic radii.
We present intermediate resolution spectroscopy of the optical counterpart to the black hole X-ray transient MAXI J1820+070 (=ASASSN-18ey) obtained with the OSIRIS spectrograph on the 10.4-m Gran Telescopio Canarias. The observations were performed with the source close to the quiescent state and before the onset of renewed activity in August 2019. We make use of these data and K-type dwarf templates taken with the same instrumental configuration to measure the projected rotational velocity of the donor star. We find $v_{rot} sin i = 84 pm 5$ km s$^{-1}$ ($1!-!sigma$), which implies a donor to black-hole mass ratio $q = {M_2}/{M_1} = 0.072 pm 0.012$ for the case of a tidally locked and Roche-lobe filling donor star. The derived dynamical masses for the stellar components are $M_1 = (5.95 pm 0.22)sin ^{-3}i$ $M_odot$ and $M_2 = (0.43 pm 0.08) sin^{-3}i$ $M_odot$. The use of $q$, combined with estimates of the accretion disk size at the time of the optical spectroscopy, allows us to revise our previous orbital inclination constraints to $66^{circ} < i < 81^{circ}$. These values lead to 95% confidence level limits on the masses of $5.73 <M_1(M_odot) < 8.34$ and $0.28 < M_2(M_odot) < 0.77$. Adopting instead the $63 pm 3^{circ}$ orientation angle of the radio jet as the binary inclination leads to $M_1 = 8.48^{+0.79}_{-0.72} M_odot$ and $M_2 = 0.61^{+0.13}_{-0.12} M_odot$ ($1!-!sigma$).
We study the jet in the hard state of the accreting black-hole binary MAXI J1820+070. From the available radio-to-optical spectral and variability data, we put strong constraints on the jet parameters. We find while it is not possible to uniquely determine the jet Lorentz factor from the spectral and variability properties alone, we can estimate the jet opening angle ($1.5pm 1$ deg), the distance at which the jet starts emitting synchrotron radiation ($sim$3$times10^{10}$cm), the magnetic field strength there ($sim$10$^4$G), and the maximum Lorentz factor of the synchrotron-emitting electrons ($sim$110--150) with relatively low uncertainty, as they depend weakly on the bulk Lorentz factor. We find the breaks in the variability power spectra from radio to sub-mm are consistent with variability damping over the time scale equal to the travel time along the jet at any Lorentz factor. This factor can still be constrained by the electron-positron pair production rate within the jet base, which we calculate based on the observed X-ray/soft gamma-ray spectrum, and the jet power, required to be less than the accretion power. The minimum ($sim$1.5) and maximum ($sim$4.5) Lorentz factors correspond to the dominance of pairs and ions, and the minimum and maximum jet power, respectively. We estimate the magnetic flux threading the black hole and find the jet can be powered by the Blandford-Znajek mechanism in a magnetically-arrested flow accretion flow. We point out the similarity of our derived formalism to that of core shifts, observed in extragalactic radio sources.
Aims. The optical emission of black hole transients increases by several magnitudes during the X-ray outbursts. Whether the extra light arises from the X-ray heated outer disc, from the inner hot accretion flow, or from the jet is currently debated. Optical polarisation measurements are able to distinguish the relative contributions of these components. Methods. We present the results of BVR polarisation measurements of the black hole X-ray binary MAXI J1820+070 during the period of March-April 2018. Results. We detect small, $sim$0.7%, but statistically significant polarisation, part of which is of interstellar origin. Depending on the interstellar polarisation estimate, the intrinsic polarisation degree of the source is between $sim$0.3% and 0.7%, and the polarisation position angle is between $sim10deg-30deg$. We show that the polarisation increases after MJD 58222 (2018 April 14). The change is of the order of 0.1% and is most pronounced in the R band. The change of the source Stokes parameters occurs simultaneously with the drop of the observed V-band flux and a slow softening of the X-ray spectrum. The Stokes vectors of intrinsic polarisation before and after the drop are parallel, at least in the V and R filters. Conclusions. We suggest that the increased polarisation is due to the decreasing contribution of the non-polarized component, which we associate with the the hot flow or jet emission. The low polarisation can result from the tangled geometry of the magnetic field or from the Faraday rotation in the dense, ionised, and magnetised medium close to the black hole. The polarized optical emission is likely produced by the irradiated disc or by scattering of its radiation in the optically thin outflow.
MAXI J1820+070 is a newly-discovered black hole X-ray binary, whose dynamical parameters, namely the black hole mass, the inclination angle and the source distance, have been estimated recently. emph{Insight}-HXMT have observed its entire outburst from March 14th, 2018. In this work, we attempted to estimate the spin parameter~$a_*$, using the continuum-fitting method and applying a fully-relativistic thin disk model to the soft-state spectra obtained by emph{Insight}-HXMT. It is well know that $a_*$ is strongly dependent on three dynamical parameters in this method, and we have examined two sets of parameters. Adopting our preferred parameters: $M$ = $8.48^{+0.79}_{-0.72}~M_odot$, $i=63^circpm3^circ$ and $D=2.96pm0.33$ kpc, we found a slowly-spinning black hole of $a_*=0.14 pm 0.09$ ($1sigma$), which give a prograde spin parameter as majority of other systems show. While it is also possible for the black hole to have a retrograde spin (less than 0) if different dynamical parameters are taken.