Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userFeasibility of characterizing subsurface brines on Ceres by electromagnetic sounding
70
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The ice-rich dwarf planet Ceres is the largest object in the main asteroid belt and is thought to have a brine or mud layer at a depth of tens of kilometers. Furthermore, recent surface deposits of brine-sourced material imply shallow feeder structures such as sills or dikes. Inductive sounding of Ceres can be performed using the solar wind as a source, as was done for the Moon during Apollo. However, the magnetotelluric method -- measuring both electric and magnetic fields at the surface -- is not sensitive to plasma effects that were experienced for Apollo, which used an orbit-to-surface magnetic transfer function. The highly conductive brine targets are readily separable from the resistive ice and rock interior, such that the depth to deep and shallow brines can be assessed simultaneously. The instrumentation will be tested on the Moon in 2023 and is ready for implementation on a Ceres landed mission.
rate research
Read More
In order to investigate the causes of different spectral slope in ccps, different grain-sizes of Ceres analogue mixtures were produced, heated to remove absorption of atmospheric water, and spectrally analyzed. First, the end-members which compose the Ceres surface (using the antigorite as Mg-phyllosilicate, the NH4-montmorillonite as NH4-phyllosilicate, the dolomite as carbonate and the graphite as dark component), were mixed, obtaining mixtures with different relative abundance, and identifying the mixture with the reflectance spectrum most similar to the average Ceres spectrum. The mixtures were obtained with grain size of 0-25 {mu}m, 25-50 mic and 50-100 mic, were heated and spectrally analysed at T= 300 K and T=200 K (typical for surface Ceres temperature during VIR observations). The most similar Ceres analogue mixture is composed of dolomite (18%), graphite (27%), antigorite (32%) and NH4-montmorillonite (29%) and the results of this work suggest that this mixture is more similar to the Ceres youngest region than to the Ceres average, in particular for the negative slope of spectrum. Small variation in the composition and grain size of end-members need to be considered, in addition to the occurrence of a dark component dispersed in fine size. Furthermore, the positive spectral slope that characterizes the mean Ceres spectrum can be obtained by the application of some processes simulating the space weathering on Ceres (as micro-meteoritic impacts and solar wind irradiation), i.e. laser and ion irradiation. As conclusion, youngest ccps on Ceresare probably composed by fresher and weakly processed mixture with fine dark material intimately dispersed: as a result, the reflectance spectra of youngest material show a negative slope in the 1.2-1.9 mic range. The redder slope observed in the older ccps is probably the consequence of the space weathering effects on fresher material
The surface reflectance of planetary regoliths may increase dramatically towards zero phase angle, a phenomenon known as the opposition effect (OE). Two physical processes that are thought to be the dominant contributors to the brightness surge are shadow hiding (SH) and coherent backscatter (CB). The occurrence of shadow hiding in planetary regoliths is self-evident, but it has proved difficult to unambiguously demonstrate CB from remote sensing observations. One prediction of CB theory is the wavelength dependence of the OE angular width. The Dawn spacecraft observed the OE on the surface of dwarf planet Ceres. We characterize the OE over the resolved surface, including the bright Cerealia Facula, and to find evidence for SH and/or CB. We analyze images of the Dawn framing camera by means of photometric modeling of the phase curve. We find that the OE of most of the investigated surface has very similar characteristics, with an enhancement factor of 1.4 and a FWHM of 3{deg} (broad OE). A notable exception are the fresh ejecta of the Azacca crater, which display a very narrow brightness enhancement that is restricted to phase angles $< 0.5${deg} (narrow OE); suggestively, this is in the range in which CB is thought to dominate. We do not find a wavelength dependence for the width of the broad OE, and lack the data to investigate the dependence for the narrow OE. The prediction of a wavelength-dependent CB width is rather ambiguous. The zero-phase observations allow us to determine Ceres visible geometric albedo as $p_V = 0.094 pm 0.005$. A comparison with other asteroids suggests that Ceres broad OE is typical for an asteroid of its spectral type, with characteristics that are primarily linked to surface albedo. Our analysis suggests that CB may occur on the dark surface of Ceres in a highly localized fashion.
Performing orbital insertion around Mars using aerocapture instead of a propulsive orbit insertion manoeuvre allows to save resources and/or increase the payload mass fraction. Aerocapture has never been employed to date because of the high uncertainties in the parameters from which it depends, mainly related to atmospheric density modeling and navigation errors. The purpose of this work is to investigate the feasibility of aerocapture at Mars with an innovative deployable drag device, whose aperture can be modulated in flight, and assess the effects of the main uncertainties on the success of the manoeuvre. This paper starts with the presentation of a parametric bi-dimensional analysis of the effectiveness of aerocapture, for which a wide range of uncertainty levels in the atmospheric density and the ballistic coefficient are considered. Then, an application to a real mission scenario is carried out including the error of the targeting manoeuvre performed at the limit of the sphere of influence of the planet. The analyses show the strong influence of the uncertainties in the atmospheric density and the ballistic coefficient, which significantly narrow the solution space and limit its continuity. However, viable solutions for aerocapture can still be identified even in the worst conditions.
A diurnal varying haze layer at the bright spots of Occator on dwarf planet Ceres has been reported from images of the Dawn Framing Camera. This finding is supported by ground-based observations revealing diurnal albedo changes at Occators longitude. In the present work, we further investigate the previously reported haze phenomenon in more detail using additional Framing Camera images. We demonstrate that the light scattering behavior at the central floor of Occator is different compared to a typical cerean surface and is likely inconsistent with a pure solid surface scatterer. The identified deviation is best explained by an additional component to the scattered light of the surface, i.e., a haze layer. Our results support the water vapor detection by Herschel observations though the existence of a tenuous cerean exosphere is not yet confirmed.
As the NASA Transiting Exoplanet Survey Satellite (TESS) fulfills its primary mission it is executing an unprecedented all-sky survey with the potential to discover distant planets in our own solar system, as well as hundreds of Transneptunian Objects (TNOs) and Centaurs. We demonstrate that shift-and-stack techniques can be used to efficiently search the Full-Frame Image (FFI) data from the TESS mission and survey the entire sky for outer Solar System objects down to $sim22^{nd}$ magnitude.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
