Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userReflections and Standing Waves on the Tianlai Cylinder Array
130
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
In 21~cm intensity mapping, the spectral smoothness of the foreground is exploited to separate it from the much weaker 21~cm signal. However, the non-smooth frequency response of the instrument complicates this process. Reflections and standing waves generate modulations on the frequency response. Here we report the analysis of the standing waves in the bandpass of the signal channels of the Tianlai Cylinder Array. By Fourier transforming the bandpass into the delay time domain, we find various standing waves generated on the telescope. A standing wave with time delay at about 142 ns is most clearly identified which is produced in the 15 meter feed cable. We also find a strong peak at a shorter delay of $tau < 50 s$, which may be a mix of the standing wave between the reflector and feed, and the standing wave on the 4 m intermediate frequency (IF) cable. We also show that a smoother frequency response could be partially recovered by removing the reflection-inducted modulations. However, the standing wave on the antenna is direction-dependent, which poses a more difficult challenge for high precision calibration.
rate research
Read More
In this paper, we apply our sky map reconstruction method for transit type interferometers to the Tianlai cylinder array. The method is based on the spherical harmonic decomposition, and can be applied to cylindrical array as well as dish arrays and we can compute the instrument response, synthesised beam, transfer function and the noise power spectrum. We consider cylinder arrays with feed spacing larger than half wavelength, and as expected, we find that the arrays with regular spacing have grating lobes which produce spurious images in the reconstructed maps. We show that this problem can be overcome, using arrays with different feed spacing on each cylinder. We present the reconstructed maps, and study the performance in terms of noise power spectrum, transfer function and beams for both regular and irregular feed spacing configurations.
The Tianlai Cylinder Pathfinder is a radio interferometer array designed to test techniques for 21 cm intensity mapping in the post-reionization Universe, with the ultimate aim of mapping the large scale structure and measuring cosmological parameters such as the dark energy equation of state. Each of its three parallel cylinder reflectors is oriented in the north-south direction, and the array has a large field of view. As the Earth rotates, the northern sky is observed by drift scanning. The array is located in Hongliuxia, a radio-quiet site in Xinjiang, and saw its first light in September 2016. In this first data analysis paper for the Tianlai cylinder array, we discuss the sub-system qualification tests, and present basic system performance obtained from preliminary analysis of the commissioning observations during 2016-2018. We show typical interferometric visibility data, from which we derive the actual beam profile in the east-west direction and the frequency band-pass response. We describe also the calibration process to determine the complex gains for the array elements, either using bright astronomical point sources, or an artificial on site calibrator source, and discuss the instrument response stability, crucial for transit interferometry. Based on this analysis, we find a system temperature of about 90 K, and we also estimate the sensitivity of the array.
The digital correlator is a crucial element in a modern radio telescope. In this paper we describe a scalable design of the correlator system for the Tianlai pathfinder array, which is an experiment dedicated to test the key technologies for conducting 21cm intensity mapping survey. The correlator is of the FX design, which firstly performs Fast Fourier Transform (FFT) including Polyphase Filter Bank (PFB) computation using a Collaboration for Astronomy Signal Processing and Electronics Research (CASPER) Reconfigurable Open Architecture Computing Hardware-2 (ROACH2) board, then computes cross-correlations using Graphical Processing Units (GPUs). The design has been tested both in laboratory and in actual observation.
The Tianlai Dish Pathfinder Array is a radio interferometer designed to test techniques for 21~cm intensity mapping in the post-reionization universe as a means for measuring large-scale cosmic structure. It performs drift scans of the sky at constant declination. We describe the design, calibration, noise level, and stability of this instrument based on the analysis of about $sim 5 %$ of 6,200 hours of on-sky observations through October, 2019. Beam pattern determinations using drones and the transit of bright sources are in good agreement, and compatible with electromagnetic simulations. Combining all the baselines, we make maps around bright sources and show that the array behaves as expected. A few hundred hours of observations at different declinations have been used to study the array geometry and pointing imperfections, as well as the instrument noise behaviour. We show that the system temperature is below 80~K for most feed antennas, and that noise fluctuations decrease as expected with integration time, at least up to a few hundred seconds. Analysis of long integrations, from 10 nights of observations of the North Celestial Pole, yielded visibilities with amplitudes of 20-30~mK, consistent with the expected signal from the NCP radio sky with $<10,$mK precision for $1 ~mathrm{MHz} times 1~ mathrm{min}$ binning. Hi-pass filtering the spectra to remove smooth spectrum signal yields a residual consistent with zero signal at the $0.5,$mK level.
A wide bandwidth, dual polarized, modified four-square antenna is presented as a feed antenna for radio astronomical measurements. A linear array of these antennas is used as a line-feed for cylindrical reflectors for Tianlai, a radio interferometer designed for 21~cm intensity mapping. Simulations of the feed antenna beam patterns and scattering parameters are compared to experimental results at multiple frequencies across the 650 - 1420 MHz range. Simulations of the beam patterns of the combined feed array/reflector are presented as well.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
