Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userStructural and Transport Properties of Li/S Battery Electrolytes: Role of the Polysulfide Species
165
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Lithium--sulfur (Li/S) batteries are regarded as one of the most promising energy storage devices beyond lithium-ion batteries because of their high energy density of 2600 Wh/kg and an affordable cost of sulfur. Meanwhile, some challenges inherent to Li/S batteries remain to be tackled, for instance, the polysulfide (PS) shuttle effect, the irreversible solidification of Li$_2$S, and the volume expansion of the cathode material during discharge. On the molecular level, these issues originate from the structural and solubility behavior of the PS species in bulk and in the electrode confinement. In this study, we use classical molecular dynamics (MD) simulations to develop a working model for PS of different chain lengths in applied electrolyte solutions of lithium bistriflimide (LiTFSI) in 1,2-dimethoxyethane (DME) and 1,3-dioxolane (DOL) mixtures. We investigate conductivities, diffusion coefficients, solvation structures, and clustering behavior and verify our simulation model with experimental measurements available in literature and newly performed by us. Our results show that diffusion coefficients and conductivities are significantly influenced by the chain length of PS. The conductivity contribution of the short chains, like Li$_2$S$_4$, is lower than of longer PS chains, such as Li$_2$S$_6$ or Li$_2$S$_8$, despite the fact that the diffusion coefficient of Li$_2$S$_4$ is higher than for longer PS chains. The low conductivity of Li$_2$S$_4$ can be attributed to its low degree of dissociation and even to a formation of large clusters in the solution. It is also found that an addition of 1 M LiTFSI into PS solutions considerably reduces the clustering behavior. Our simulation model enables future systematic studies in various solvating and confining systems for the rational design of Li/S electrolytes.
rate research
Read More
Solid polymer electrolytes for lithium batteries promise improvements in safety and energy density if their conductivity can be increased. Nanostructured block copolymer electrolytes specifically have the potential to provide both good ionic conductivity and good mechanical properties. This study shows that the previously neglected nanoscale composition of the polymer electrolyte close to the electrode surface has an important effect on impedance measurements, despite its negligible extent compared to the bulk electrolyte. Using standard stainless steel blocking electrodes, the impedance of lithium salt-doped poly(isoprene-b-styrene-b-ethylene oxide) (ISO) exhibited a marked decrease upon thermal processing of the electrolyte. In contrast, covering the electrode surface with a low molecular weight poly(ethylene oxide) (PEO) brush resulted in higher and more reproducible conductivity values, which were insensitive to the thermal history of the device. A qualitative model of this effect is based on the hypothesis that ISO surface reconstruction at the different electrode surfaces leads to a change in the electrostatic double layer, affecting electrochemical impedance spectroscopy measurements. As a main result, PEO-brush modification of electrode surfaces is beneficial for the robust electrolyte performance of PEO-containing block-copolymers and may be crucial for their accurate characterization and use in Li-ion batteries.
Varying the amounts of silicon and carbon, different composites have been prepared by ball milling of Si, Ni$_{3.4}$Sn$_4$, Al and C. Silicon and carbon contents are varied from 10 to 30 wt.% Si, and 0 to 20 wt.% C. The microstructural and electrochemical properties of the composites have been investigated by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and electrochemical galvanostatic cycling up to 1000 cycles. Impact of silicon and carbon contents on the phase occurrence, electrochemical capacity and cycle-life are compared and discussed. For C-content comprised between 9 and 13 wt.% and Si-content >= 20 wt.%, Si nanoparticles are embedded in a Ni$_{3.4}$Sn$_4$-Al-C matrix which is chemically homogeneous at the micrometric scale. For other carbon contents and low Si-amount (10 wt.%), no homogeneous matrix is formed around Si nanoparticles. When homogenous matrix is formed, both Ni$_3$Sn$_4$ and Si participate to the reversible lithiation mechanism, whereas no reaction between Ni$_3$Sn$_4$ and Li is observed for no homogenous matrix. Moreover, best cycle-life performances are obtained when Si nanoparticles are embedded in a homogenous matrix and Si-content is moderate (<= 20 wt.%). Composites with carbon in the 9-13 wt.% range and 20 wt.% silicon lead to the best balance between capacity and life duration upon cycling. This work experimentally demonstrates that embedding Si in an intermetallic/carbon matrix allows to efficiently accommodate Si volume changes on cycling to ensure long cycle-life.
A structural study of the smaller Li$^+$He$_n$ clusters with $nle30$ has been carried out using different theoretical methods. The structures and the energetics of the clusters have been obtained using both classical energy minimization methods and quantum Diffusion Monte Carlo. The total interaction acting within the clusters has been obtained as a sum of pairwise potentials: Li$^+$-He and He-He. This approximation had been shown in our earlier study cite{8} to give substantially correct results for energies and geometries once compared to full ab-initio calculations. The general features of the spatial structures, and their energetics, are discussed in details for the clusters up to $n=30$ and the first solvation shell is shown to be essentially completed by the first ten helium atoms.
The 3D ternary Li_4Ti_5O_12, the Li+-based battery anode, presents the unusual lattice symmetry (a triclinic crystal), band structure, charge density, and density of states, under the first-principles calculations. It belongs to a large direct-gap semiconductor of E_g^d~ 2,98 eV. The atom-dominated valence and conduction bands, the spatial charge distribution and the atom- and orbital-decomposed van Hove singularities are available in the delicate identifications of multi-orbital hybridizations in Li-O and Ti-O bonds. The extremely non-uniform chemical environment, which induce the very complicated hopping integrals, directly arise from the large bonding fluctuations and the highly anisotropic configurations. Also, the developed theoretical framework is very useful for fully understanding the cathodes and electrolytes of oxide compounds.
Non-aqueous Li-O2 batteries are promising for next generation energy storage. New battery chemistries based on LiOH, rather than Li2O2, have recently been reported in systems with added water, one using a soluble additive LiI and the other using solid Ru catalysts. Here, we focus on the mechanism of Ru-catalyzed LiOH chemistry. Using nuclear magnetic resonance, operando electrochemical pressure measurements and mass spectrometry, we show that on discharging LiOH forms via a 4 e- oxygen reduction reaction, the H in LiOH coming solely from added H2O and the O from both O2 and H2O. On charging, quantitative LiOH oxidation occurs at 3.1 V, with O being trapped in a form of dimethyl sulfone in the electrolyte. Compared to Li2O2, LiOH formation over Ru incurs hardly any side reactions, a critical advantage for developing a long-lived battery. An optimized metal catalyst-electrolyte couple needs to be sought that aids LiOH oxidation and is able stable towards attack by hydroxyl radicals.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
