Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userDagger: Towards Efficient RPCs in Cloud Microservices with Near-Memory Reconfigurable NICs
345
0
0.0
(
0
)
Added by
Nikita Lazarev
Publication date
2020
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Cloud applications are increasingly relying on hundreds of loosely-coupled microservices to complete user requests that meet an applications end-to-end QoS requirements. Communication time between services accounts for a large fraction of the end-to-end latency and can introduce performance unpredictability and QoS violations. This work presents our early work on Dagger, a hardware acceleration platform for networking, designed specifically with the unique qualities of microservices in mind. The Dagger architecture relies on an FPGA-based NIC, closely coupled with the processor over a configurable memory interconnect, designed to offload and accelerate RPC stacks. Unlike the traditional cloud systems that use PCIe links as the NIC I/O interface, we leverage memory-interconnected FPGAs as networking devices to provide the efficiency, transparency, and programmability needed for fine-grained microservices. We show that this considerably improves CPU utilization and performance for cloud RPCs.
rate research
Read More
The ongoing shift of cloud services from monolithic designs to microservices creates high demand for efficient and high performance datacenter networking stacks, optimized for fine-grained workloads. Commodity networking systems based on software stacks and peripheral NICs introduce high overheads when it comes to delivering small messages. We present Dagger, a hardware acceleration fabric for cloud RPCs based on FPGAs, where the accelerator is closely-coupled with the host processor over a configurable memory interconnect. The three key design principle of Dagger are: (1) offloading the entire RPC stack to an FPGA-based NIC, (2) leveraging memory interconnects instead of PCIe buses as the interface with the host CPU, and (3) making the acceleration fabric reconfigurable, so it can accommodate the diverse needs of microservices. We show that the combination of these principles significantly improves the efficiency and performance of cloud RPC systems while preserving their generality. Dagger achieves 1.3-3.8x higher per-core RPC throughput compared to both highly-optimized software stacks, and systems using specialized RDMA adapters. It also scales up to 84 Mrps with 8 threads on 4 CPU cores, while maintaining state-of-the-art us-scale tail latency. We also demonstrate that large third-party applications, like memcached and MICA KVS, can be easily ported on Dagger with minimal changes to their codebase, bringing their median and tail KVS access latency down to 2.8 - 3.5us and 5.4 - 7.8us, respectively. Finally, we show that Dagger is beneficial for multi-tier end-to-end microservices with different threading models by evaluating it using an 8-tier application implementing a flight check-in service.
Ongoing climate change calls for fast and accurate weather and climate modeling. However, when solving large-scale weather prediction simulations, state-of-the-art CPU and GPU implementations suffer from limited performance and high energy consumption. These implementations are dominated by complex irregular memory access patterns and low arithmetic intensity that pose fundamental challenges to acceleration. To overcome these challenges, we propose and evaluate the use of near-memory acceleration using a reconfigurable fabric with high-bandwidth memory (HBM). We focus on compound stencils that are fundamental kernels in weather prediction models. By using high-level synthesis techniques, we develop NERO, an FPGA+HBM-based accelerator connected through IBM OCAPI (Open Coherent Accelerator Processor Interface) to an IBM POWER9 host system. Our experimental results show that NERO outperforms a 16-core POWER9 system by 5.3x and 12.7x when running two different compound stencil kernels. NERO reduces the energy consumption by 12x and 35x for the same two kernels over the POWER9 system with an energy efficiency of 1.61 GFLOPS/Watt and 21.01 GFLOPS/Watt. We conclude that employing near-memory acceleration solutions for weather prediction modeling is promising as a means to achieve both high performance and high energy efficiency.
Deep convolutional neural networks have achieved remarkable progress in recent years. However, the large volume of intermediate results generated during inference poses a significant challenge to the accelerator design for resource-constraint FPGA. Due to the limited on-chip storage, partial results of intermediate layers are frequently transferred back and forth between on-chip memory and off-chip DRAM, leading to a non-negligible increase in latency and energy consumption. In this paper, we propose block convolution, a hardware-friendly, simple, yet efficient convolution operation that can completely avoid the off-chip transfer of intermediate feature maps at run-time. The fundamental idea of block convolution is to eliminate the dependency of feature map tiles in the spatial dimension when spatial tiling is used, which is realized by splitting a feature map into independent blocks so that convolution can be performed separately on individual blocks. We conduct extensive experiments to demonstrate the efficacy of the proposed block convolution on both the algorithm side and the hardware side. Specifically, we evaluate block convolution on 1) VGG-16, ResNet-18, ResNet-50, and MobileNet-V1 for ImageNet classification task; 2) SSD, FPN for COCO object detection task, and 3) VDSR for Set5 single image super-resolution task. Experimental results demonstrate that comparable or higher accuracy can be achieved with block convolution. We also showcase two CNN accelerators via algorithm/hardware co-design based on block convolution on memory-limited FPGAs, and evaluation shows that both accelerators substantially outperform the baseline without off-chip transfer of intermediate feature maps.
Memory system is often the main bottleneck in chipmultiprocessor (CMP) systems in terms of latency, bandwidth and efficiency, and recently additionally facing capacity and power problems in an era of big data. A lot of research works have been done to address part of these problems, such as photonics technology for bandwidth, 3D stacking for capacity, and NVM for power as well as many micro-architecture level innovations. Many of them need a modification of current memory architecture, since the decades-old synchronous memory architecture (SDRAM) has become an obstacle to adopt those advances. However, to the best of our knowledge, none of them is able to provide a universal memory interface that is scalable enough to cover all these problems. In this paper, we argue that a message-based interface should be adopted to replace the traditional bus-based interface in memory system. A novel message interface based memory system (MIMS) is proposed. The key innovation of MIMS is that processor and memory system communicate through a universal and flexible message interface. Each message packet could contain multiple memory requests or commands along with various semantic information. The memory system is more intelligent and active by equipping with a local buffer scheduler, which is responsible to process packet, schedule memory requests, and execute specific commands with the help of semantic information. The experimental results by simulator show that, with accurate granularity message, the MIMS would improve performance by 53.21%, while reducing energy delay product (EDP) by 55.90%, the effective bandwidth utilization is improving by 62.42%. Furthermore, combining multiple requests in a packet would reduce link overhead and provide opportunity for address compression.
Realizing todays cloud-level artificial intelligence functionalities directly on devices distributed at the edge of the internet calls for edge hardware capable of processing multiple modalities of sensory data (e.g. video, audio) at unprecedented energy-efficiency. AI hardware architectures today cannot meet the demand due to a fundamental memory wall: data movement between separate compute and memory units consumes large energy and incurs long latency. Resistive random-access memory (RRAM) based compute-in-memory (CIM) architectures promise to bring orders of magnitude energy-efficiency improvement by performing computation directly within memory. However, conventional approaches to CIM hardware design limit its functional flexibility necessary for processing diverse AI workloads, and must overcome hardware imperfections that degrade inference accuracy. Such trade-offs between efficiency, versatility and accuracy cannot be addressed by isolated improvements on any single level of the design. By co-optimizing across all hierarchies of the design from algorithms and architecture to circuits and devices, we present NeuRRAM - the first multimodal edge AI chip using RRAM CIM to simultaneously deliver a high degree of versatility for diverse model architectures, record energy-efficiency $5times$ - $8times$ better than prior art across various computational bit-precisions, and inference accuracy comparable to software models with 4-bit weights on all measured standard AI benchmarks including accuracy of 99.0% on MNIST and 85.7% on CIFAR-10 image classification, 84.7% accuracy on Google speech command recognition, and a 70% reduction in image reconstruction error on a Bayesian image recovery task. This work paves a way towards building highly efficient and reconfigurable edge AI hardware platforms for the more demanding and heterogeneous AI applications of the future.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
