Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userReconfiguration of District Heating Network for Operational Flexibility Enhancement in Power System Unit Commitment
348
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Massive adoptions of combined heat and power (CHP) units necessitate the coordinated operation of power system and district heating system (DHS). Exploiting the reconfigurable property of district heating networks (DHNs) provides a cost-effective solution to enhance the flexibility of the power system by redistributing heat loads in DHS. In this paper, a unit commitment considering combined electricity and reconfigurable heating network (UC-CERHN) is proposed to coordinate the day-ahead scheduling of power system and DHS. The DHS is formulated as a nonlinear and mixed-integer model with considering the reconfigurable DHN. Also, an auxiliary energy flow variable is introduced in the formed DHS model to make the commitment problem tractable, where the computational burdens are significantly reduced. Extensive case studies are presented to validate the effectiveness of the approximated model and illustrate the potential benefits of the proposed method with respect to congestion management and wind power accommodation. (Corresponding author:Hongbin Sun)
rate research
Read More
In Part I of this paper we have introduced the closed-form conditions for guaranteeing regional frequency stability in a power system. Here we propose a methodology to represent these conditions in the form of linear constraints and demonstrate their applicability by implementing them in a generation-scheduling model. This model simultaneously optimises energy production and ancillary services for maintaining frequency stability in the event of a generation outage, by solving a frequency-secured Stochastic Unit Commitment (SUC). We consider the Great Britain system, characterised by two regions that create a non-uniform distribution of inertia: England in the South, where most of the load is located, and Scotland in the North, containing significant wind resources. Through several case studies, it is shown that inertia and frequency response cannot be considered as system-wide magnitudes in power systems that exhibit inter-area oscillations in frequency, as their location in a particular region is key to guarantee stability. In addition, securing against a medium-sized loss in the low-inertia region proves to cause significant wind curtailment, which could be alleviated through reinforced transmission corridors. In this context, the proposed constraints allow to find the optimal volume of ancillary services to be procured in each region.
This paper proposes a Clustered Unit Commitment (CUC) formulation to accurately model flexibility requirements such as ramping, reserve, and startup/shutdown constraints. The CUC is commonly applied in large and long-term planning models to approximate the units operational flexibility in power systems due to its computational advantages. However, the classic CUC intrinsically and hiddenly overestimates the individual units flexibility, thus being unable to replicate the result of the individual UC. This paper then present a set of constraints to correctly represent the units hidden flexibility within the cluster, mainly defined by the individual units ramping and startup/shutdown capabilities, including up/down reserves. Different case studies show that the proposed CUC replicates the objective function of the individual UC while solving significantly faster, between 5 to 311 times faster. Therefore, the proposed CUC correctly represents the individual units ramping and reserve flexibility within the cluster and could be directly applied to long-term planning models without significantly increasing their computational burden.
This paper presents a spanning tree-based genetic algorithm (GA) for the reconfiguration of electrical distribution systems with the objective of minimizing active power losses. Due to low voltage levels at distribution systems, power losses are high and sensitive to system configuration. Therefore, optimal reconfiguration is an important factor in the operation of distribution systems to minimize active power losses. Smart and automated electric distribution systems are able to reconfigure as a response to changes in load levels to minimize active power losses. The proposed method searches spanning trees of potential configurations and finds the optimal spanning tree using a genetic algorithm in two steps. In the first step, all invalid combinations of branches and tie-lines (i.e., switching combinations that do not provide power to some of loads or violate the radiality and connectivity conditions) generated by initial population of GA are filtered out with the help of spanning-tree search algorithm. In the second step, power flow analyses are performed only for combinations that form spanning trees. The optimal configuration is then determined based on the amount of active power losses (optimal configuration is the one that results in minimum power losses). The proposed method is implemented on several systems including the well-known 33-node and 69-node systems. The results show that the proposed method is accurate and efficient in comparison with existing methods.
Electric power grids are critical infrastructure that support modern society by supplying electric energy to critical infrastructure systems. Incidents are increasing that range from natural disasters to cyber attacks. These incidents threaten the reliability of power systems and create disturbances that affect the whole society. While existing standards and technologies are being applied to proactively improve power system reliability and resilience, there are still widespread electricity outages that cause billions of dollars in economic loss annually and threaten societal function and safety. Improving resilience in preparation for such events warrants strategic network design to harden the system. This paper presents an approach to strengthen power system security and reliability against disturbances by expanding the network structure from an ecosystems perspective. Ecosystems have survived a wide range of disturbances over a long time period, and an ecosystems robust structure has been identified as the key element for its survivability. In this paper, we first present a study of the correlation of ecological robustness and power system structures. Then, we present a mixed-integer nonlinear programming problem (MINLP) that expands the transmission network structure to maximize ecological robustness with power system constraints for an improved ability to absorb disturbances. We solve the MINLP problem for the IEEE 24 Bus Reliability Test System and three synthetic power grids with 200-, 500- and 2000-buses, respectively. Our evaluation results show the optimized power systems have increased the networks robustness, more equally distributed power flows, and less violations under different levels of contingencies.
Radiality constraints are involved in both distribution system restoration and reconfiguration problems. However, a set of widely used radiality constraints, i.e., the spanning tree (ST) constraints, has its limitations which have not been well recognized. In this letter, the limitation of the ST constraints is analyzed and an effective set of constraints, referred to as the single-commodity flow constraints, is presented. Furthermore, a combined set of constraints is proposed and case studies indicate that the combined constraints can gain computational efficiency in the reconfiguration problem. Recommendations on the use of radiality constraints are also provided.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
