Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMid-infrared emission and absorption in strained and relaxed direct bandgap GeSn semiconductors
303
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
By independently engineering strain and composition, this work demonstrates and investigates direct band gap emission in the mid-infrared range from GeSn layers grown on silicon. We extend the room-temperature emission wavelength above ~4.0 {mu}m upon post-growth strain relaxation in layers with uniform Sn content of 17 at.%. The fundamental mechanisms governing the optical emission are discussed based on temperature-dependent photoluminescence, absorption measurements, and theoretical simulations. Regardless of strain and composition, these analyses confirm that single-peak emission is always observed in the probed temperature range of 4-300 K, ruling out defect- and impurity-related emission. Moreover, carrier losses into thermally-activated non-radiative recombination channels are found to be greatly minimized as a result of strain relaxation. Absorption measurements validate the direct band gap absorption in strained and relaxed samples at energies closely matching photoluminescence data. These results highlight the strong potential of GeSn semiconductors as versatile building blocks for scalable, compact, and silicon-compatible mid-infrared photonics and quantum opto-electronics.
rate research
Read More
GeSn alloys are the most promising semiconductors for light emitters entirely based on group IV elements. Alloys containing more than 8 at.% Sn have fundamental direct band-gaps, similar to conventional III-V semiconductors and thus can be employed for light emitting devices. Here, we report on GeSn microdisk lasers encapsulated with a SiNx stressor layer to produce tensile strain. A 300nm GeSn layer with 5.4 at.% Sn, which is an indirect band-gap semiconductor as-grown with a compressive strain of -0.32 %, is transformed via tensile strain engineering into a truly direct band-gap semiconductor. In this approach the low Sn concentration enables improved defect engineering and the tensile strain delivers a low density of states at the valence band edge, which is the light hole band. Continuous wave (cw) as well as pulsed lasing are observed at very low optical pump powers. Lasers with emission wavelength of 2.5 um have thresholds as low as 0.8kWcm^-2 for ns-pulsed excitation, and 1.1kWcm^-2 under cw excitation. These thresholds are more than two orders of magnitude lower than those previously reported for bulk GeSn lasers, approaching these values obtained for III-V lasers on Si. The present results demonstrate the feasabiliy and are the guideline for monolithically integrated Si-based laser sources on Si photonics platform.
(Si)GeSn semiconductors are finally coming of age after a long gestation period. The demonstration of device quality epi-layers and quantum-engineered heterostructures has meant that tunable all-group IV Si-integrated infrared photonics is now a real possibility. Notwithstanding the recent exciting developments in (Si)GeSn materials and devices, this family of semiconductors is still facing serious limitations that need to be addressed to enable reliable and scalable applications. The main outstanding challenges include the difficulty to grow high crystalline quality layers and heterostructures at the desired Sn content and lattice strain, preserve the material integrity during growth and throughout device processing steps, and control doping and defect density. Other challenges are related to the lack of optimized device designs and predictive theoretical models to evaluate and simulate the fundamental properties and performance of (Si)GeSn layers and heterostructures. This Perspective highlights key strategies to circumvent these hurdles and bring this material system to maturity to create far-reaching new opportunities for Si-compatible infrared photodetectors, sensors, and emitters for applications in free-space communication, infrared harvesting, biological and chemical sensing, and thermal imaging.
Silicon crystallized in the usual cubic (diamond) lattice structure has dominated the electronics industry for more than half a century. However, cubic silicon (Si), germanium (Ge) and SiGe-alloys are all indirect bandgap semiconductors that cannot emit light efficiently. Accordingly, achieving efficient light emission from group-IV materials has been a holy grail in silicon technology for decades and, despite tremendous efforts, it has remained elusive. Here, we demonstrate efficient light emission from direct bandgap hexagonal Ge and SiGe alloys. We measure a subnanosecond, temperature-insensitive radiative recombination lifetime and observe a similar emission yield to direct bandgap III-V semiconductors. Moreover, we demonstrate how by controlling the composition of the hexagonal SiGe alloy, the emission wavelength can be continuously tuned in a broad range, while preserving a direct bandgap. Our experimental findings are shown to be in excellent quantitative agreement with the ab initio theory. Hexagonal SiGe embodies an ideal material system to fully unite electronic and optoelectronic functionalities on a single chip, opening the way towards novel device concepts and information processing technologies.
A robust and reproducible preparation of self-standing nanoporous gold leaves (NPGL) is presented, with optical characterization and plasmonic behaviour analysis. Nanoporous gold (NPG) layers are tipically prepared as thin films on a bulk substrate. Here we present an alternative approach consisting in the preparation of NPGL in the form of a self-standing film. This solution leads to a perfectly symmetric configuration where the metal is immersed in a homogeneous medium and in addition can support the propagation of symmetric and antisymmetric plasmonic modes. With respect to bulk gold, NPG shows metallic behaviour at higher wavelengths, suggesting possible plasmonic applications in the near / medium infrared range. In this work the plasmonic properties in the wide wavelength range from the ultraviolet up to the mid-infrared range have been investigated.
Strain engineering in Sn-rich group IV semiconductors is a key enabling factor to exploit the direct band gap at mid-infrared wavelengths. Here, we investigate the effect of strain on the growth of GeSn alloys in a Ge/GeSn core/shell nanowire geometry. Incorporation of Sn content in the 10-20 at.% range is achieved with Ge core diameters ranging from 50nm to 100nm. While the smaller cores lead to the formation of a regular and homogeneous GeSn shell, larger cores lead to the formation of multi-faceted sidewalls and broadened segregation domains, inducing the nucleation of defects. This behavior is rationalized in terms of the different residual strain, as obtained by realistic finite element method simulations. The extended analysis of the strain relaxation as a function of core and shell sizes, in comparison with the conventional planar geometry, provides a deeper understanding of the role of strain in the epitaxy of metastable GeSn semiconductors.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
