Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userTricontrollable pixelated metasurface for absorbing terahertz radiation
84
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The incorporation of materials with controllable electromagnetic constitutive parameters allows the conceptualization and realization of controllable metasurfaces. With the aim of formulating and investigating a tricontrollable metasurface for efficiently absorbing terahertz radiation, we adopted a pixel-based approach in which the meta-atoms are biperiodic assemblies of discrete pixels. We patched some pixels with indium antimonide (InSb) and some with graphene, leaving the others unpatched. The bottom of each meta-atom was taken to comprise a metal-backed substrate of silicon nitride. The InSb-patched pixels facilitate the thermal and magnetic control modalities, whereas the graphene-patched pixels facilitate the electrical control modality. With proper configuration of patched and unpatched pixels and with proper selection of the patching material for each patched pixel, the absorptance spectrums of the pixelated metasurface were found to contain peak-shaped features with maximum absorptance exceeding 0.95, full-width-at-half-maximum bandwidth of less than 0.7~THz, and the maximum-absorptance frequency lying between 2~THz and 4~THz. The location of the maximum-absorptance frequency can be thermally, magnetically, and electrically controllable. The lack of rotational invariance of the optimal meta-atom adds mechanical rotation as the fourth control modality.
rate research
Read More
The ability to manipulate the electric-field vector of broadband terahertz waves is essential for applications of terahertz technologies in many areas, and can open up new possibilities for nonlinear terahertz spectroscopy and coherent control. Here, we propose a novel laser-driven terahertz emitter, consisting of metasurface-patterned magnetic multilayer heterostructures. Such hybrid terahertz emitters can combine the advantages of spintronic emitters for being ultrabroadband, efficient and flexible, as well as those of metasurfaces for the unique capability to manipulate terahertz waves with high precision and degree of freedom. Taking a stripe-patterned metasurface as an example, we demonstrate the generation of broadband terahertz waves with tunable chirality. Based on experimental and theoretical studies, the interplay between the laser-induced spintronic-origin currents and the metasurface-induced transient charges/currents are investigated, revealing the strong influence on the device functionality originated from both the light-matter interactions in individual metasurface units and the dynamic coupling between them. Our work not only offers a flexible, reliable and cost-effective solution for chiral terahertz wave generation and manipulation, but also opens a new pathway to metasurface-tailored spintronic devices for efficient vector-control of electromagnetic waves in the terahertz regime.
Metasurfaces incorporating graphene hold great promise for dynamic manipulation of terahertz waves. However, it remains challenging to design a broadband graphene-based terahertz metasurface with switchable functionality of half-wave plate (HWP) and quarter-wave plate (QWP). Here, we propose a graphene-metal hybrid metasurface for achieving broadband switchable HWP/QWP in the terahertz regime. Simulation results show that, by varying the Fermi energy of graphene from 0 eV to 1 eV, the function of the reflective metasurface can be switched from an HWP with polarization conversion ratio exceeding 97% over a wide band ranging from 0.7 THz to 1.3 THz, to a QWP with ellipticity above 0.92 over 0.78-1.33 THz. The sharing bandwidth reaches up to 0.52 THz and the relative bandwidth is as high as 50%. We expect this broadband and dynamically switchable terahertz HWP/QWP will find applications in terahertz sensing, imaging, and telecommunications.
Dynamically switchable half-/quarter-wave plates have recently been the focus in the terahertz regime. Conventional design philosophy leads to multilayer metamaterials or narrowband metasurfaces. Here we propose a novel design philosophy and a VO2-metal hybrid metasurface for achieving broadband dynamically switchable half-/quarter-wave plate (HWP/QWP) based on the transition from the overdamped to the underdamped resonance. Results show that, by varying the VO2 conductivity by three orders of magnitude, the proposed metasurfaces function can be switched between an HWP with polarization conversion ratio larger than 96% and a QWP with ellipticity close to -1 over the broad working band of 0.8-1.2 THz. We expect that the proposed design philosophy will advance the engineering of metasurfaces for dynamically switchable functionalities beyond the terahertz regime.
Switchable and active metasurfaces allow for the realization of beam steering, zoomable metalenses, or dynamic holography. To achieve this goal, one has to combine high-performance metasurfaces with switchable materials that exhibit high refractive index contrast and high switching speeds. In this work, we present an electrochemically switchable metasurface for beam steering where we use the conducting polymer poly(3,4-ethylene-dioxythiophene) (PEDOT) as an active material. We show beam diffraction with angles up to 10{deg} and change of the intensities of the diffracted and primary beams employing an externally applied cyclic voltage between -1 V and +0.5 V. With this unique combination, we realize switching speeds in the range of 1 Hz while the extension to typical display frequencies in the tens of Hz region is possible. Our findings have immediate implications on the design and fabrication of future electronically switchable and display nanotechnologies, such as dynamic holograms.
A special class of anisotropic media, hyperbolic metamaterials and metasurfaces (HMMs), has attracted much attention in recent years due to its unique abilities to manipulate and engineer electromagnetic waves on the subwavelength scale. Because all HMM designs require metal dielectric composites, the unavoidable metal loss at optical frequencies inspired the development of active HMMs, where gain materials is incorporated to compensate the metal loss. Here, we experimentally demonstrate an active type II HMM that operates at vacuum wavelength near 750 nm on a silicon platform. Different from previous active HMMs operating below 1 {mu}m, the dielectric constituent in our HMM is solely composed of gain medium, by utilizing solution processed and widely tunable metal halide perovskite gain. Thanks to the facile fabrication, tunability and silicon compatibility of our active HMM, this work paves the way towards HMMs integration into on chip components, and eventually, into photonic integrated circuits.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
