No Arabic abstract
This paper presents a survey of microwave front-end receivers installed at radio telescopes throughout the World. This unprecedented analysis was conducted as part of a review of front-end developments for Italian radio telescopes, initiated by the Italian National Institute for Astrophysics in 2016. Fifteen international radio telescopes have been selected to be representative of the instrumentation used for radio astronomical observations in the frequency domain from 300 MHz to 116 GHz. A comprehensive description of the existing receivers is presented and their characteristics are compared and discussed. The observing performances of the complete receiving chains are also presented. An overview of on-going developments illustrates and anticipates future trends in front-end projects to meet the most ambitious scientific research goals.
RF system-on-chip (RFSoC) devices provide the potential for implementing a complete radio astronomy receiver on a single board, but performance of the integrated analogue-to-digital converters is critical. We have evaluated the performance of the data converters in the Xilinx ZU28DR RFSoC, which are 12-bit, 8-fold interleaved converters with a maximum sample speed of 4.096 Giga-sample per second (GSPS). We measured the spurious-free dynamic range (SFDR), signal-to-noise and distortion (SINAD), effective number of bits (ENOB), intermodulation distortion (IMD) and cross-talk between adjacent channels over the bandwidth of 2.048 GHz. We both captured data for off-line analysis with floating-point arithmetic, and implemented a real-time integer arithmetic spectrometer on the RFSoC. The performance of the ADCs is sufficient for radio astronomy applications and close to the vendor specifications in most of the scenarios. We have carried out spectral integrations of up to 100 s and stability tests over tens of hours and find thermal noise-limited performance over these timescales.
MeerKATHI is the current development name for a radio-interferometric data reduction pipeline, assembled by an international collaboration. We create a publicly available end-to-end continuum- and line imaging pipeline for MeerKAT and other radio telescopes. We implement advanced techniques that are suitable for producing high-dynamic-range continuum images and spectroscopic data cubes. Using containerization, our pipeline is platform-independent. Furthermore, we are applying a standardized approach for using a number of different of advanced software suites, partly developed within our group. We aim to use distributed computing approaches throughout our pipeline to enable the user to reduce larger data sets like those provided by radio telescopes such as MeerKAT. The pipeline also delivers a set of imaging quality metrics that give the user the opportunity to efficiently assess the data quality.
This review arose from the European Radio Astronomy Technical Forum (ERATec) meeting held in Firenze, October 2015, and aims to highlight the breadth and depth of the high-impact science that will be aided and assisted by the use of simultaneous mm-wavelength receivers. Recent results and opportunities are presented and discussed from the fields of: continuum VLBI (observations of weak sources, astrometry, observations of AGN cores in spectral index and Faraday rotation), spectral line VLBI (observations of evolved stars and massive star-forming regions) and time domain observations of the flux variations arising in the compact jets of X-ray binaries. Our survey brings together a large range of important science applications, which will greatly benefit from simultaneous observing at mm-wavelengths. Such facilities are essential to allow these applications to become more efficient, more sensitive and more scientifically robust. In some cases without simultaneous receivers the science goals are simply unachievable. Similar benefits would exist in many other high frequency astronomical fields of research.
The results of four recently introduced beamforming schemes for phased array systems are discussed, each of which is capable to provide high sensitivity and accurate polarimetric performance of array-based radio telescopes. Ideally, a radio polarimeter should recover the actual polarization state of the celestial source, and thus compensate for unwanted polarization degradation effects which are intrinsic to the instrument. In this paper, we compare the proposed beamforming schemes through an example of a practical phased array system (APERTIF prototype) and demonstrate that the optimal beamformer, the max-SLNR beamformer, the eigenvector beamformer, and the bi-scalar beamformer are sensitivity equivalent but lead to different polarization state solutions, some of which are sub-optimal.
The second data release of ESAs Gaia satellite (Gaia DR2) revolutionised astronomy by providing accurate distances, proper motions, apparent magnitudes, and in many cases temperatures and radial velocities for an unprecedented number of stars. These new results, which are freely available, need to be considered in virtually any stellar research project, as they provide crucial information on luminosity, position, motion, orbit, and colours of observed targets. Ground-based spectroscopic surveys, like RAVE, Gaia-ESO, Apogee, LAMOST, and GALAH, are adding more measurements of radial velocities and, most importantly, chemistry of stellar atmospheres, including abundances of individual elements. We briefly describe the new information trove, together with some warnings against blind-folded use. Even though it may seem that Gaia is already providing any information that could be collected by small telescopes, the opposite is true. In particular, we discuss a possible reach of a ground-based photometric survey using a custom filter set. We demonstrate that it can provide valuable information on chemistry of observed stars, which is not provided by Gaia or other sky surveys. A survey conducted with a small telescope has the potential to measure both the metallicity and alpha enhancement at a ~0.1 dex level for a large fraction of Gaia targets, a valuable goal for galactic archaeology.