Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userInvestigations on MultiView VLBI for SKA
104
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The SKA will deliver orders of magnitude increases in sensitivity, but most astrometric VLBI observations are limited by systematic errors. In these cases improved sensitivity offers no benefit. The best current solution for improving the accuracy of the VLBI calibration is MV VLBI, where multiple simultaneous observations around the target are used to deduce the corrections required for the line of sight to the target. We have estimated and quantified the applicability of MV from real-world ionospheric studies, making projections into achievable astrometric accuracies. These predict systematic measurement errors, with calibrators separated by several degrees, of $sim$10uas with current VLBI facilities. For closer calibrators, that are in-beam for single dish VLBI facilities, we predict systematic measurement errors of a few uas. This is the ideal combination, where the sensitivity of the SKA will provide the precision and MV will provide the accuracy. Based on these results we suggest that the SKA design should increase the number of VLBI beams it can form from four to as many as ten.
rate research
Read More
High precision astrometric Space Very Long Baseline Interferometry (S-VLBI) at the low end of the conventional frequency range, i.e. 20cm, is a requirement for a number of high priority science goals. These are headlined by obtaining trigonometric parallax distances to pulsars in Pulsar--Black Hole pairs and OH masers anywhere in the Milky Way Galaxy and the Magellanic Clouds. We propose a solution for the most difficult technical problems in S-VLBI by the MultiView approach where multiple sources, separated by several degrees on the sky, are observed simultaneously. We simulated a number of challenging S-VLBI configurations, with orbit errors up to 8m in size and with ionospheric atmospheres consistant with poor conditions. In these simulations we performed MultiView analysis to achieve the required science goals. This approach removes the need for beam switching requiring a Control Moment Gyro, and the space and ground infrastructure required for high quality orbit reconstruction of a space-based radio telescope. This will dramatically reduce the complexity of S-VLBI missions which implement the phase-referencing technique.
We discuss the unique opportunities for maser astrometry with the inclusion of the Square Kilometre Array (SKA) in Very Long Baseline Interferometry (VLBI) networks. The first phase of the SKA will enable observations of hydroxyl and methanol masers, positioning the latter to an accuracy of 5 microarcseconds, and the second phase may allow water maser observations. These observations will provide trigonometric distances with errors as small as 1%. The unrivalled sensitivity of the SKA will enable large-scale surveys and, through joint operations, will turn any VLBI network into a fast astrometry device. Both evolved stars and high mass star formation regions will be accessible throughout the (Southern) Milky Way, completing our understanding of the content, dynamics and history of our Galaxy. Maser velocities and proper motions will be measurable in the Local Group of galaxies and beyond, providing new insights into their kinematics and evolution.
We launched the VLBI Ecliptic Plane Survey program in 2015. The goal of this program is to find all compact sources within 7.5 degrees of the ecliptic plane which are suitable as phase calibrators for anticipated phase referencing observations of spacecrafts. We planned to observe a complete sample of the sources brighter than 50 mJy at 5 GHz listed in the PMN and GB6 catalogues that have not yet been observed with VLBI. By April 2016, eight 24-hour sessions have been performed and processed. Among 2227 observed sources, 435 sources were detected in three or more observations. We have also run three 8-hour segments with VLBA for improving positions of 71 ecliptic sources.
We present a multi-calibrator solution, i.e. MultiView, to achieve accurate astrometry on the level of the thermal noise at low VLBI frequencies dominated by ionospheric residuals. We demonstrate on L-band VLBA observations how MultiView provides superior astrometry to conventional phase referencing techniques (Rioja et al. 2017). We also introduce a new trial method to detect antenna based systematic errors in the observations (Orosz et al. 2017}. All presented methods and results are based on our recent papers (Orosz et al. 2017; Rioja et al. 2017).
The calibration and analysis of polarization observations in Very Long Baseline Interferometry (VLBI) requires the use of specific algorithms that suffer from several limitations, closely related to assumptions in the data properties that may not hold in observations taken with new-generation VLBI equipment. Nowadays, the instantaneous bandwidth achievable with VLBI backends can be as high as several GHz, covering several radio bands simultaneously. In addition, the sensitivity of VLBI observations with state-of-the-art equipment may reach dynamic ranges of tens of thousands, both in total intensity and in polarization. In this paper, we discuss the impact of the limitations of common VLBI polarimetry algorithms on narrow-field observations taken with modern VLBI arrays (from the VLBI Global Observing System, VGOS, to the Event Horizon Telescope, EHT) and present new software that overcomes these limitations. In particular, our software is able to perform a simultaneous fit of multiple calibrator sources, include non-linear terms in the model of the instrumental polarization and use a self-calibration approach for the estimate of the polarization leakage in the antenna receivers.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
