Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userDetector Characterization of a Near-Infrared Discrete Avalanche Photodiode 5x5 Array for Astrophysical Observations
86
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We present detector characterization of a state-of-the-art near-infrared (950nm - 1650 nm) Discrete Avalanche Photodiode detector (NIRDAPD) 5x5 array. We designed an experimental setup to characterize the NIRDAPD dark count rate, photon detection efficiency (PDE), and non-linearity. The NIRDAPD array was illuminated using a 1050 nm light-emitting diode (LED) as well as 980 nm, 1310 nm, and 1550 nm laser diodes. We find a dark count rate of 3.3x10$^6$ cps, saturation at 1.2x10$^8$ photons per second, a photon detection efficiency of 14.8% at 1050 nm, and pulse detection at 1 GHz. We characterized this NIRDAPD array for a future astrophysical program that will search for technosignatures and other fast (>1 Ghz) astrophysical transients as part of the Pulsed All-sky Near-infrared Optical Search for Extraterrestrial Intelligence (PANOSETI) project. The PANOSETI program will consist of an all-sky optical (350 - 800 nm) observatory capable of observing the entire northern hemisphere instantaneously and a wide-field NIR (950 - 1650 nm) component capable of drift scanning the entire sky in 230 clear nights. PANOSETI aims to be the first wide-field fast-time response near-infrared transient search.
rate research
Read More
We report an automated characterization of a single-photon detector based on commercial silicon avalanche photodiode (PerkinElmer C30902SH). The photodiode is characterized by I-V curves at different illumination levels (darkness, 10 pW and 10 uW), dark count rate and photon detection efficiency at different bias voltages. The automated characterization routine is implemented in C++ running on a Linux computer.
Mid-infrared (IR) array detectors have been used for astronomical observations in space. However, the uniformities of their spectral response curves have not been investigated in detail, the understanding of which is important for spectroscopic observations using large array formats. We characterize the spectral responses of all the pixels in IR array detectors using a Fourier transform infrared spectrometer and cryogenic optics for measurements at high signal-to-noise ratios. We measured the spectral responses of the Si:As impurity band conduction (IBC) array, a flight back-up detector for AKARI/IRC. As a result, we find that the Si:As array has intrinsic variations in the spectral response along the row and column directions of the array. We also find that the cutoff wavelength of the Si:As IBC array depends on the intensity of the incident light.
We report operation and characterization of a lab-assembled single-photon detector based on commercial silicon avalanche photodiodes (PerkinElmer C30902SH, C30921SH). Dark count rate as low as 5 Hz was achieved by cooling the photodiodes down to -80 C. While afterpulsing increased as the photodiode temperature was decreased, total afterpulse probability did not become significant due to detectors relatively long deadtime in a passively-quenched scheme. We measured photon detection efficiency higher than 50% at 806 nm.
We present the first operation of the Avalanche Photodiode (APD) from Hamamatsu to xenon scintillation light and to direct X-rays of 22.1 keV and 5.9 keV. A large non-linear response was observed for the direct X-ray detection. At 415 V APD bias voltage it was of about 30 % for 22.1 keV and about 45 % for 5.9 keV. The quantum efficiency for 172 nm photons has been measured to be 69 +/- 15 %.
Families of cosmic inflation models predict a primordial gravitational-wave background that imprints B-mode polarization pattern in the Cosmic Microwave Background (CMB). High sensitivity instruments with wide frequency coverage and well-controlled systematic errors are needed to constrain the faint B-mode amplitude. We have developed antenna-coupled Transition Edge Sensor (TES) arrays for high-sensitivity polarized CMB observations over a wide range of millimeter-wave bands. BICEP Array, the latest phase of the BICEP/Keck experiment series, is a multi-receiver experiment designed to search for inflationary B-mode polarization to a precision $sigma$(r) between 0.002 and 0.004 after 3 full years of observations, depending on foreground complexity and the degree of lensing removal. We describe the electromagnetic design and measured performance of BICEP Array low-frequency 40-GHz detector, their packaging in focal plane modules, and optical characterization including efficiency and beam matching between polarization pairs. We summarize the design and simulated optical performance, including an approach to improve the optical efficiency due to mismatch losses. We report the measured beam maps for a new broad-band corrugation design to minimize beam differential ellipticity between polarization pairs caused by interactions with the module housing frame, which helps minimize polarized beam mismatch that converts CMB temperature to polarization ($T rightarrow P$) anisotropy in CMB maps.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
