Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAnalytical Channel Models for Millimeter Wave UAV Networks under Hovering Fluctuations
81
0
0.0
(
0
)
Added by
Mohammad Taghi Dabiri
Publication date
2019
fields
Electronic Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
The integration of unmanned aerial vehicles (UAVs) and millimeter wave (mmWave) wireless systems has been recently proposed to provide high data rate aerial links for next generation wireless networks. However, establishing UAV-based mmWave links is quite challenging due to the random fluctuations of hovering UAVs which can induce antenna gain mismatch between transmitter and receiver. To assess the benefit of UAV-based mmWave links, in this paper, tractable, closed-form statistical channel models are derived for three UAV communication scenarios: (i) a direct UAV-to-UAV link, (ii) an aerial relay link in which source, relay, and destination are hovering UAVs, and (iii) a relay link in which a hovering UAV connects a ground source to a ground destination. The accuracy of the derived analytical expressions is corroborated by performing Monte-Carlo simulations. Numerical results are then used to study the effect of antenna directivity gain under different channel conditions for establishing reliable UAV-based mmWave links in terms of achieving minimum outage probability. It is shown that the performance of such links is largely dependent on the random fluctuations of hovering UAVs. Moreover, higher antenna directivity gains achieve better performance at low SNR regime. Nevertheless, at the high SNR regime, lower antenna directivity gains result in a more reliable communication link. The developed results can therefore be applied as a benchmark for finding the optimal antenna directivity gain of UAVs under the different levels of instability without resorting to time-consuming simulations.
rate research
Read More
The use of Millimeter-wave (mmWave) spectrum in cellular communications has recently attracted growing interest to support the expected massive increase in traffic demands. However, the high path-loss at mmWave frequencies poses severe challenges. In this paper, we analyze the potential coverage gains of using unmanned aerial vehicles (UAVs), as hovering relays, in integrated access and backhaul (IAB) mmWave cellular scenarios. Specifically, we utilize the WinProp software package, which employs ray tracing methodology, to study the propagation characteristics of outdoor mmWave channels at 30 and 60 GHz frequency bands in a Manhattan-like environment. In doing so, we propose the implementation of amplify-and-forward (AF) and decode-and-forward (DF) relaying mechanisms in the WinProp software. We show how the 3D deployment of UAVs can be defined based on the coverage ray tracing maps at access and backhaul links. Furthermore, we propose an adaptive UAV transmission power for the AF relaying. We demonstrate, with the aid of ray tracing simulations, the performance gains of the proposed relaying modes in terms of downlink coverage, and the received signal to interference and noise ratio (SINR).
Millimeter-wave rotary-wing (RW) unmanned aerial vehicle (UAV) air-to-ground (A2G) links face unpredictable Doppler effect arising from the inevitable wobbling of RW UAV. Moreover, the time-varying channel characteristics during transmission lead to inaccurate channel estimation, which in turn results in the deteriorated bit error probability performance of the UAV A2G link. This paper studies the impact of mechanical wobbling on the Doppler effect of the millimeter-wave wireless channel between a hovering RW UAV and a ground node. Our contributions of this paper lie in: i) modeling the wobbling process of a hovering RW UAV; ii) developing an analytical model to derive the channel temporal autocorrelation function (ACF) for the millimeter-wave RW UAV A2G link in a closed-form expression; and iii) investigating how RW UAV wobbling impacts the Doppler effect on the millimeter-wave RW UAV A2G link. Numerical results show that different RW UAV wobbling patterns impact the amplitude and the frequency of ACF oscillation in the millimeter-wave RW UAV A2G link. For UAV wobbling, the channel temporal ACF decreases quickly and the impact of the Doppler effect is significant on the millimeter-wave A2G link.
Channel estimation in the RIS-aided massive multiuser multiple-input single-output (MU-MISO) wireless communication systems is challenging due to the passive feature of RIS and the large number of reflecting elements that incur high channel estimation overhead. To address this issue, we propose a novel cascaded channel estimation strategy with low pilot overhead by exploiting the sparsity and the correlation of multiuser cascaded channels in millimeter-wave massive MISO systems. Based on the fact that the phsical positions of the BS, the RIS and users may not change in several or even tens of consecutive channel coherence blocks, we first estimate the full channel state information (CSI) including all the angle and gain information in the first coherence block, and then only re-estimate the channel gains in the remaining coherence blocks with much less pilot overhead. In the first coherence block, we propose a two-phase channel estimation method, in which the cascaded channel of one typical user is estimated in Phase I based on the linear correlation among cascaded paths, while the cascaded channels of other users are estimated in Phase II by utilizing the partial CSI of the common base station (BS)-RIS channel obtained in Phase I. The total theoretical minimum pilot overhead in the first coherence block is $8J-2+(K-1)leftlceil (8J-2)/Lrightrceil $, where $K$, $L$ and $J$ denote the numbers of users, paths in the BS-RIS channel and paths in the RIS-user channel, respectively. In each of the remaining coherence blocks, the minimum pilot overhead is $JK$. Moreover, the training phase shift matrices at the RIS are optimized to improve the estimation performance.
Recent advances in small-scale unmanned aerial vehicles (UAVs) have opened up new horizons for establishing UAV-based free-space optical (FSO) links. However, FSO technology requires precise beam alignment while random fluctuations of hovering UAVs can induce beam misalignment and angle-of-arrival (AoA) fluctuations. For an FSO link to a UAV, we consider a quadrant detector array for optical beam tracking and study the effect of random hovering fluctuations of the UAV on the performance of the tracking method, and based on the degree of instabilities for the UAV, the optimum size of the detectors for minimizing the tracking error is found. Furthermore, for optimal detection of On - Off keying symbols, the receiver requires instantaneous channel fading coefficients. We propose a blind method to estimate the channel coefficients, i.e., without using any pilot symbols, to increase link bandwidth efficiency. To evaluate the performance of the considered system, closed-form expressions of tracking error and bit-error rate are derived. Moreover, Monte-Carlo simulation is carried out to corroborate the accuracy of the derived analytical expressions.
We consider the channel estimation problem in point-to-point reconfigurable intelligent surface (RIS)-aided millimeter-wave (mmWave) MIMO systems. By exploiting the low-rank nature of mmWave channels in the angular domains, we propose a non-iterative Two-stage RIS-aided Channel Estimation (TRICE) framework, where every stage is formulated as a multidimensional direction-of-arrival (DOA) estimation problem. As a result, our TRICE framework is very general in the sense that any efficient multidimensional DOA estimation solution can be readily used in every stage to estimate the associated channel parameters. Numerical results show that the TRICE framework has a lower training overhead and a lower computational complexity, as compared to benchmark solutions.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
