Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userThermal expansion coefficient and lattice anharmonicity of cubic boron arsenide
214
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Recent measurements of an unusual high thermal conductivity of around 1000 W m-1 K-1 at room temperature in cubic boron arsenide (BAs) confirm predictions from theory and suggest potential applications of this semiconductor compound for thermal management applications. Knowledge of the thermal expansion coefficient and Gruneisen parameter of a material contributes both to the fundamental understanding of its lattice anharmonicity and to assessing its utility as a thermal-management material. However, previous theoretical calculations of the thermal expansion coefficient and Gruneisen parameter of BAs yield inconsistent results. Here we report the linear thermal expansion coefficient of BAs obtained from the X-ray diffraction measurements from 300 K to 773 K. The measurement results are in good agreement with our ab initio calculations that account for atomic interactions up to fifth nearest neighbours. With the measured thermal expansion coefficient and specific heat, a Gruneisen parameter of BAs of 0.84 +/- 0.09 is obtained at 300 K, in excellent agreement with the value of 0.82 calculated from first principles and much lower than prior theoretical results. Our results confirm that BAs exhibits a better thermal expansion coefficient match with commonly used semiconductors than other high-thermal conductivity materials such as diamond and cubic boron nitride.
rate research
Read More
The ultrahigh thermal conductivity of boron arsenide makes it a promising material for next-generation electronics and optoelectronics. In this work, we report measured optical properties of cubic boron arsenide crystals including the complex dielectric function, refractive index, and absorption coefficient in the ultraviolet, visible, and near-infrared wavelength range. The data were collected at room temperature using spectroscopic ellipsometry as well as transmission and reflection spectroscopy. We further calculate the optical response using density functional and many-body perturbation theory, considering quasiparticle and excitonic corrections. The computed values for the direct and indirect band gaps (4.25 eV and 2.07 eV) agree well with the measured results (4.12 eV and 2.02 eV). Our findings contribute to the effort of using boron arsenide in novel electronic and optoelectronic applications that take advantage of its demonstrated ultrahigh thermal conductivity and predicted high ambipolar carrier mobility.
Boron arsenide (c-BAs) is at the forefront of research on ultrahigh thermal conductivity materials. We present a Raman scattering study of isotopically tailored cubic boron arsenide single crystals for 11 isotopic compositions spanning the range from nearly pure c-$^{10}$BAs to nearly pure c-$^{11}$BAs. Our results provide insights on the effects of strong mass disorder on optical phonons and the appearance of two-mode behavior in the Raman spectra of mixed crystals. Strong isotope disorder also relaxes the one-phonon Raman selection rules, resulting in disorder-activated Raman scattering by acoustic phonons.
Reducing thermal conductivity ($kappa$) is an efficient way to boost the thermoelectric performance to achieve direct solid-state conversion to electrical power from thermal energy, which has lots of valuable applications in reusing waste resources. In this study, we propose an effective approach for realizing low $kappa$ by introducing lone-pair electrons or making the lone-pair electrons stereochemically active through bond nanodesigning. As a case study, by cutting at the (111) cross section of the three-dimensional cubic boron arsenide (c-BAs), the $kappa$ is lowered by more than one order of magnitude in the resultant two-dimensional system of graphene-like BAs (g-BAs) due to the stereochemically activated lone-pair electrons. Similar concept can be also extended to other systems with lone-pair electrons beyond BAs, such as group III-V compounds, where a strong correlation between $kappa$ modulation and electronegativity difference for binary compounds is found. Thus, the lone-pair electrons combined with a small electronegativity difference could be the indicator of lowering $kappa$ through bond nanodesigning to change the coordination environment. The proposed approach for realizing low $kappa$ and the underlying mechanism uncovered in this study would largely benefit the design of thermoelectric devices with improved performance, especially in future researches involving novel materials for energy applications.
Despite the widespread use of silicon in modern technology, its peculiar thermal expansion is not well-understood. Adapting harmonic phonons to the specific volume at temperature, the quasiharmonic approximation, has become accepted for simulating the thermal expansion, but has given ambiguous interpretations for microscopic mechanisms. To test atomistic mechanisms, we performed inelastic neutron scattering experiments from 100-1500K on a single-crystal of silicon to measure the changes in phonon frequencies. Our state-of-the-art ab initio calculations, which fully account for phonon anharmonicity and nuclear quantum effects, reproduced the measured shifts of individual phonons with temperature, whereas quasiharmonic shifts were mostly of the wrong sign. Surprisingly, the accepted quasiharmonic model was found to predict the thermal expansion owing to a fortuitous cancellation of contributions from individual phonons.
BAs is III-V semiconductor with ultra-high thermal conductivity, but many of its electronic properties are unknown. This work applies predictive atomistic calculations to investigate the properties of BAs heterostructures, such as strain effects on band alignments and carrier mobility, considering BAs as both a thin film and a substrate for lattice-matched materials. The results show that strain decreases the band gap independent of sign or direction. In addition, biaxial tensile strain increases the in-plane electron and hole mobilities by more than 60% compared to the unstrained values due to a reduction of the electron effective mass and of hole interband scattering. Moreover, BAs is shown to be nearly lattice-matched with InGaN and ZnSnN2, two important optoelectronic semiconductors with tunable band gaps by alloying and cation disorder, respectively. The results predict type-II band alignments and determine the absolute band offsets of these two materials with BAs. The combination of the ultra-high thermal conductivity and intrinsic p-type character of BAs, with its high electron and hole mobilities that can be further increased by tensile strain, as well as the lattice-match and the type-II band alignment with intrinsically n-type InGaN and ZnSnN2 demonstrate the potential of BAs heterostructures for electronic and optoelectronic devices.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
