Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAn optomechanical platform with a 3-dimensional waveguide cavity
154
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
At low temperatures, microwave cavities are often preferred for the readout and control of a variety of systems. In this paper, we present design and measurements on an optomechanical device based on a 3-dimensional rectangular waveguide cavity. We show that by suitably modifying the electromagnetic field corresponding to the fundamental mode of the cavity, the equivalent circuit capacitance can be reduced to 29 fF. By coupling a mechanical resonator to the modified electromagnetic mode of the cavity, we achieved a capacitance participation ratio of 43 $%$. We demonstrate an optomechanical cooperativity, $C$$sim$40, characterized by performing measurements in the optomechanically-induced absorption (OMIA) limit. In addition, due to a low-impedance environment between the two-halves of the cavity, our design has the flexibility of incorporating a DC bias across the mechanical resonator, often a desired feature in tunable optomechanical devices.
rate research
Read More
We consider an optomechanical system comprising a single cavity mode and a dense spectrum of acoustic modes and solve for the quantum dynamics of initial cavity mode Fock (i.e., photon number) superposition states and thermal acoustic states. The optomechanical interaction results in dephasing without damping and bears some analogy to gravitational decoherence. For a cavity mode locally coupled to a one-dimensional (1D) elastic string-like environment or two-dimensional (2D) elastic membrane-like environment, we find that the dephasing dynamics depends respectively on the string length and membrane area--a consequence of an infrared divergence in the limit of an infinite-sized string or membrane. On the other hand, for a cavity mode locally coupled to a three-dimensional (3D) bulk elastic solid, the dephasing dynamics is independent of the solid volume (i.e., is infrared finite), but dependent on the local geometry of the coupled cavity--a consequence of an ultraviolet divergence in the limit of a pointlike coupled cavity. We consider as possible respective realizations for the cavity-coupled-1D and 2D acoustic environments, an LC oscillator capacitively coupled to a partially metallized strip and a cavity light mode interacting via light pressure with a membrane.
The mechanical properties of light have found widespread use in the manipulation of gas-phase atoms and ions, helping create new states of matter and realize complex quantum interactions. The field of cavity-optomechanics strives to scale this interaction to much larger, even human-sized mechanical objects. Going beyond the canonical Fabry-Perot cavity with a movable mirror, here we explore a new paradigm in which multiple cavity-optomechanical elements are wired together to form optomechanical circuits. Using a pair of optomechanical cavities coupled together via a phonon waveguide we demonstrate a tunable delay and filter for microwave-over-optical signal processing. In addition, we realize a tight-binding form of mechanical coupling between distant optomechanical cavities, leading to direct phonon exchange without dissipation in the waveguide. These measurements indicate the feasibility of phonon-routing based information processing in optomechanical crystal circuitry, and further, to the possibility of realizing topological phases of photons and phonons in optomechanical cavity lattices.
We present an experimental study of dynamical back-action cooling of the fundamental vibrational mode of a thin semitransparent membrane placed within a high-finesse optical cavity. We study how the radiation pressure interaction modifies the mechanical response of the vibrational mode, and the experimental results are in agreement with a Langevin equation description of the coupled dynamics. The experiments are carried out in the resolved sideband regime, and we have observed cooling by a factor 350 We have also observed the mechanical frequency shift associated with the quadratic term in the expansion of the cavity mode frequency versus the effective membrane position, which is typically negligible in other cavity optomechanical devices.
We explore whether localized surface plasmon polariton modes can transfer heat between molecules placed in the hot spot of a nanoplasmonic cavity through optomechanical interaction with the molecular vibrations. We demonstrate that external driving of the plasmon resonance indeed induces an effective molecule-molecule interaction corresponding to a new heat transfer mechanism, which can even be more effective in cooling the hotter molecule than its heating due to the vibrational pumping by the plasmon. This novel mechanism allows to actively control the rate of heat flow between molecules through the intensity and frequency of the driving laser.
We investigate a cavity quantum electrodynamic effect, where the alignment of two-dimensional freely rotating optical dipoles is driven by their collective coupling to the cavity field. By exploiting the formal equivalence of a set of rotating dipoles with a polymer we calculate the partition function of the coupled light-matter system and demonstrate it exhibits a second order phase transition between a bunched state of isotropic orientations and a stretched one with all the dipoles aligned. Such a transition manifests itself as an intensity-dependent shift of the polariton mode resonance. Our work, lying at the crossroad between cavity quantum electrodynamics and quantum optomechanics, is a step forward in the on-going quest to understand how strong coupling can be exploited to influence matter internal degrees of freedom.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
