Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userGeneration of optical frequency comb in a chi-2 sheet micro optical parametric oscillator via cavity phase matching
110
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Chi-3 micro resonators have enabled compact and portable frequency comb generation, but require sophisticated dispersion control. Here we demonstrate an alternative approach using a chi-2 sheet cavity, where the dispersion requirement is relaxed by cavity phase matching. 21.2 THz broadband comb generation is achieved with uniform line spacing of 133.0 GHz, despite a relatively large dispersion of 275.4 fs^2/mm around 1064nm. With 22.6 % high slope efficiency and 14.9 kW peak power handling, this chi-2 comb can be further stabilized for navigation, telecommunication, astronomy, and spectroscopy applications.
rate research
Read More
Continuously pumped passive nonlinear cavities can be harnessed for the creation of novel optical frequency combs. While most research has focused on third-order Kerr nonlinear interactions, recent studies have shown that frequency comb formation can also occur via second-order nonlinear effects. Here, we report on the formation of quadratic combs in optical parametric oscillator (OPO) configurations. Specifically, we demonstrate that optical frequency combs can be generated in the parametric region around half of the pump frequency in a continuously-driven OPO. We also model the OPO dynamics through a single time-domain mean-field equation, identifying previously unknown dynamical regimes, induced by modulation instabilities, which lead to comb formation. Numerical simulation results are in good agreement with experimentally observed spectra. Moreover, the analysis of the coherence properties of the simulated spectra shows the existence of correlated and phase-locked combs. Our results reveal previously unnoticed dynamics of an apparently well assessed optical system, and can lead to a new class of frequency comb sources that may stimulate novel applications by enabling straightforward access to elusive spectral regions, such as the mid-infrared.
Optical frequency combs (OFCs) at Mid-Infrared (MIR) wavelengths are essential for applications in precise spectroscopy, gas sensing and molecular fingerprinting, because of its revolutionary precision in both wavelength and frequency domain. The microresonator-based OFCs make a further step towards practical applications by including such high precision in a compact and cost-effective package. However, dispersion engineering is still a challenge for the conventional chi-3 micro-ring resonators and a MIR pump laser is required. Here we develop a different platform of a chi-2 optical superlattice box resonator to generate MIR OFC by optical parametric down conversion. With near-material-limited quality factor of 2.0*10^7, broadband MIR OFC can be generated with over 250 nm span around 2060 nm, where only a common near-infrared laser is necessary as pump. The fine teeth spacing corresponds to a measurable radio frequency beat note at 1.566 GHz, and also results in a fine spectroscopy resolution. Its linewidth is measured to be 6.1 kHz, which reveals a low comb noise that agrees well with the clean temporal waveforms. With high output power of over 370 mW, such MIR OFC is capable for long distance sensing and ranging applications.
Optical parametric oscillators (OPOs) have been widely used for decades as tunable, narrow linewidth, and coherent light sources for reaching long wavelengths and are attractive for applications such as quantum random number generation and Ising machines. To date, waveguide-based OPOs have suffered from relatively high thresholds on the order of hundreds of milliwatts. With the advance in integrated photonic techniques demonstrated by high-efficiency second harmonic generation in aluminum nitride (AlN) photonic microring resonators, highly compact and nanophotonic implementation of parametric oscillation is feasible. Here, we employ phase-matched AlN microring resonators to demonstrate low-threshold parametric oscillation in the telecom infrared band with an on-chip efficiency up to 17% and milliwatt-level output power. A broad phase-matching window is observed, enabling tunable generation of signal and idler pairs over a 180 nm bandwidth across the C band. This result establishes an important milestone in integrated nonlinear optics and paves the way towards chip-based quantum light sources and tunable, coherent radiation for spectroscopy and chemical sensing.
We combine a tunable continuous-wave optical parametric oscillator and a femtosecond Ti:Sapphire laser frequency comb to provide a phase-coherent bridge between the visible and mid-infrared spectral ranges. As a first demonstration of this new technique we perform a direct frequency comparison between an iodine stabilized Nd:YAG laser at 1064 nm and an infrared methane optical frequency standard at $3.39 mu$m.
Aluminum nitride is an appealing nonlinear optical material for on-chip wavelength conversion. Here we report optical frequency comb generation from high quality factor aluminum nitride micro-ring resonators integrated on silicon substrates. By engineering the waveguide structure to achieve near-zero dispersion at telecommunication wavelengths and optimizing the phase matching for four-wave mixing, frequency combs are generated with a single wavelength continuous-wave pump laser. The Kerr coefficient (n2) of aluminum nitride is further extracted from our experimental results.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
