Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userCUBESPEC: Low-cost space-based astronomical spectroscopy
45
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
CubeSats are routinely used for low-cost photometry from space. Space-borne spectroscopy, however, is still the exclusive domain of much larger platforms. Key astrophysical questions in e.g. stellar physics and exoplanet research require uninterrupted spectral monitoring from space over weeks or months. Such monitoring of individual sources is unfortunately not affordable with these large platforms. With CUBESPEC we plan to offer the astronomical community a low-cost CubeSat solution for near-UV/optical/near-IR spectroscopy that enables this type of observations. CUBESPEC is a generic spectrograph that can be configured with minimal hardware changes to deliver both low resolution (R=100) with very large spectral coverage (200-1000nm), as well as high resolution (R=30,000) over a selected wavelength range. It is built around an off-axis Cassegrain telescope and a slit spectrograph with configurable dispersion elements. CUBESPEC will use a compact attitude determination and control system for coarse pointing of the entire spacecraft, supplemented with a fine-guidance system using a fast steering mirror to center the source on the spectrograph slit and to cancel out satellite jitter. An extremely compact optical design allows us to house this instrument in a 6U CubeSat with a volume of only 10x20x30cm$^{3}$, while preserving a maximized entrance pupil of ca. 9x19cm$^{2}$. In this contribution, we give an overview of the CUBESPEC project, discuss its most relevant science cases, and present the design of the instrument.
rate research
Read More
As astronomy moves into the era of large-scale time-domain surveys, we are seeing a flood of new transient and variable sources which will reach biblical proportions with the advent of LSST. A key strategic challenge for astronomy in this era is the lack of suitable spectroscopic followup facilities. In response to this need, we have developed the PolyOculus approach for producing large-area-equivalent telescopes by using fiber optics to link modules of multiple semi-autonomous, small, inexpensive, commercial-off-the-shelf telescopes. Crucially, this scalable design has construction costs which are $>10x$ lower than equivalent traditional large-area telescopes. In addition, PolyOculus is inherently highly automated and well-suited for remote operations. Development of this technology will enable the expansion of major research efforts in the LSST era to a host of smaller universities and colleges, including primarily-undergraduate institutions, for budgets consistent with their educational expenditures on similar facilities. We propose to develop and deploy a 1.6-m prototype demonstrator at the Mt. Laguna Observatory in California, followed by a full-scale 5-meter-class PolyOculus facility for linkage to existing and upcoming time-domain surveys.
We present an overview of the ICE hardware and software framework that implements large arrays of interconnected FPGA-based data acquisition, signal processing and networking nodes economically. The system was conceived for application to radio, millimeter and sub-millimeter telescope readout systems that have requirements beyond typical off-the-shelf processing systems, such as careful control of interference signals produced by the digital electronics, and clocking of all elements in the system from a single precise observatory-derived oscillator. A new generation of telescopes operating at these frequency bands and designed with a vastly increased emphasis on digital signal processing to support their detector multiplexing technology or high-bandwidth correlators---data rates exceeding a terabyte per second---are becoming common. The ICE system is built around a custom FPGA motherboard that makes use of an Xilinx Kintex-7 FPGA and ARM-based co-processor. The system is specialized for specific applications through software, firmware, and custom mezzanine daughter boards that interface to the FPGA through the industry-standard FMC specifications. For high density applications, the motherboards are packaged in 16-slot crates with ICE backplanes that implement a low-cost passive full-mesh network between the motherboards in a crate, allow high bandwidth interconnection between crates, and enable data offload to a computer cluster. A Python-based control software library automatically detects and operates the hardware in the array. Examples of specific telescope applications of the ICE framework are presented, namely the frequency-multiplexed bolometer readout systems used for the SPT and Simons Array and the digitizer, F-engine, and networking engine for the CHIME and HIRAX radio interferometers.
We describe the design, construction and commissioning of LOTUS; a simple, low-cost long-slit spectrograph for the Liverpool Telescope. The design is optimized for near-UV and visible wavelengths and uses all transmitting optics. It exploits the instrument focal plane field curvature to partially correct axial chromatic aberration. A stepped slit provides narrow (2.5x95 arcsec) and wide (5x25 arcsec) options that are optimized for spectral resolution and flux calibration respectively. On sky testing shows a wavelength range of 3200-6300 Angstroms with a peak system throughput (including detector quantum efficiency) of 15 per cent and wavelength dependant spectral resolution of R=225-430. By repeated observations of the symbiotic emission line star AG Peg we demonstrate the wavelength stability of the system is less than 2 Angstroms rms and is limited by the positioning of the object in the slit. The spectrograph is now in routine operation monitoring the activity of comet 67P/Churyumov-Gerasimenko during its current post-perihelion apparition.
The principles and practice of astronomical imaging Fourier transform spectroscopy (FTS) at far-infrared wavelengths are described. The Mach-Zehnder interferometer design has been widely adopted for current and future imaging FTS instruments; we compare this design with two other common interferometer formats. Examples of three instruments based on the Mach-Zehnder design are presented. The techniques for retrieving astrophysical parameters from the measured spectra are discussed using calibration data obtained with the Herschel SPIRE instrument. The paper concludes with an example of imaging spectroscopy obtained with the SPIRE FTS instrument.
Precise astronomical spectroscopic analyses routinely assume that individual pixels in charge-coupled devices (CCDs) have uniform sensitivity to photons. Intra-pixel sensitivity (IPS) variations may already cause small systematic errors in, for example, studies of extra-solar planets via stellar radial velocities and cosmological variability in fundamental constants via quasar spectroscopy, but future experiments requiring velocity precisions approaching ~1 cm/s will be more strongly affected. Laser frequency combs have been shown to provide highly precise wavelength calibration for astronomical spectrographs, but here we show that they can also be used to measure IPS variations in astronomical CCDs in situ. We successfully tested a laser frequency comb system on the Ultra-High Resolution Facility spectrograph at the Anglo-Australian Telescope. By modelling the 2-dimensional comb signal recorded in a single CCD exposure, we find that the average IPS deviates by <8 per cent if it is assumed to vary symmetrically about the pixel centre. We also demonstrate that series of comb exposures with absolutely known offsets between them can yield tighter constraints on symmetric IPS variations from ~100 pixels. We discuss measurement of asymmetric IPS variations and absolute wavelength calibration of astronomical spectrographs and CCDs using frequency combs.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
