Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userVarifocal zoom imaging with large area focal length adjustable metalenses
75
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Varifocal lenses are essential components of dynamic optical systems with applications in photography, mixed reality, and microscopy. Metasurface optics has strong potential for creating tunable flat optics. Existing tunable metalenses, however, typically require microelectromechanical actuators, which cannot be scaled to large area devices, or rely on high voltages to stretch a flexible substrate and achieve a sufficient tuning range. Here, we build a 1 cm aperture varifocal metalens system at 1550 nm wavelength inspired by an Alvarez lens, fabricated using high-throughput stepper photolithography. We demonstrate a nonlinear change in focal length by minimally actuating two cubic phase metasurfaces laterally, with focusing efficiency as high as 57% and a wide focal length change of more than 6 cm (> 200%). We also test a lens design at visible wavelength and conduct varifocal zoom imaging with a demonstrated 4x zoom capability without any other optical elements in the imaging path.
rate research
Read More
The conventional lenss tunability drawback always restricts their application compared to the metasurface lens (metalens). On the other side, reconfigurable metalenses offer the benefits of ultrathin thickness and capable of tunability. Therefore achieving reconfigurable functionalities in a single metasurface has attracted significant research interest for potential terahertz (THz) applications. In this paper, an adjustable metasurface is presented using Vanadium dioxide (VO2) to manipulate the electromagnetic waves and provide the full reflection phase. The phase-change metasurface is composed of a VO2 nanofilm, a silicon spacer, and a gold layer embedded in the structures bottom. By employing the reconfigurable metasurface with the specific phase distribution, the incident beam can converge to determined points in any arbitrary manner, including the number of the focal points, focal points location, and power intensity ratio. Numerical simulations demonstrate that the proposed reconfigurable metasurface can concentrate power on one or more than one focal point in reflection modes as expected. Additionally, the VO2-based metasurface can control concentration width in a real-time manner using a novel proposed method. The simulation and theoretical results are in good agreement to verify the validity and feasibility of 2-bit metalens design, which has considerable potential in wireless high-speed communication and super-resolution imaging.
As one of nanoscale planar structures, metasurface has shown excellent superiorities on manipulating light intensity, phase and/or polarization with specially designed nanoposts pattern. It allows to miniature a bulky optical lens into the chip-size metalens with wavelength-order thickness, playing an unprecedented role in visible imaging systems (e.g. ultrawide-angle lens and telephoto). However, a CMOS-compatible metalens has yet to be achieved in the visible region due to the limitation on material properties such as transmission and compatibility. Here, we experimentally demonstrate a divergent metalens based on silicon nitride platform with large numerical aperture (NA~0.98) and high transmission (~0.8) for unpolarized visible light, fabricated by a 695-nm-thick hexagonal silicon nitride array with a minimum space of 42 nm between adjacent nanoposts. Nearly diffraction-limit virtual focus spots are achieved within the visible region. Such metalens enables to shrink objects into a micro-scale size field of view as small as a single-mode fiber core. Furthermore, a macroscopic metalens with 1-cm-diameter is also realized including over half billion nanoposts, showing a potential application of wide viewing-angle functionality. Thanks to the high-transmission and CMOS-compatibility of silicon nitride, our findings may open a new door for the miniaturization of optical lenses in the fields of optical fibers, microendoscopes, smart phones, aerial cameras, beam shaping, and other integrated on-chip devices.
MAGIX is a planned experiment that will be implemented at the upcoming accelerator MESA in Mainz. Due to its location in the energy-recovering lane of the accelerator beam-currents up to 1mA with a maximum energy of 105 MeV will be available for precision experiments. MAGIX itself consists of a jet-target and two magnetic spectrometers. Inside the spectrometers GEM-based detectors will be used in the focal plane for track reconstruction. The design goals for the detector modules are a spatial resolution of 50 um, a size of 1.20 m x 0.3 m and a minimal material budget. To accomplish these goals we started developing several GEM-prototypes to study different behaviors and techniques to optimize the final detector design. The GEM foils used are provided by CERN and are trained, stretched and framed in our laboratory. The readout is done with an SRS based system. In this contribution the requirements, achievements and the ongoing developments are presented.
Metasurface optics have demonstrated vast potential for implementing traditional optical components in an ultra-compact and lightweight form factor. Metasurface lenses, also called metalenses, however, suffer from severe chromatic aberrations, posing serious limitations on their practical use. Existing approaches for circumventing such aberrations via dispersion engineering are limited to small apertures and often entails multiple scatterers per unit cell with small feature sizes. Here, we present an alternative technique to mitigate chromatic aberration and demonstrate high-quality, full-color imaging using extended depth of focus (EDOF) metalenses and computational reconstruction. Previous EDOF metalenses relied on cubic phase masks that induced asymmetric artifacts in images, whereas here we demonstrate the use of symmetric phase masks that can improve subsequent image quality, including logarithmic-aspherical, and shifted axicon masks. Our work will inspire further development in achromatic metalenses beyond dispersion engineering and open new research avenues on hybrid optical-digital metasurface systems.
Optical metasurfaces have shown to be a powerful approach to planar optical elements, enabling an unprecedented control over light phase and amplitude. At that stage, where wide variety of static functionalities have been accomplished, most efforts are being directed towards achieving reconfigurable optical elements. Here, we present our approach to an electrically controlled varifocal metalens operating in the visible frequency range. It relies on dynamically controlling the refractive index environment of a silicon metalens by means of an electric resistor embedded into a thermo-optical polymer. We demonstrate precise and continuous tuneability of the focal length and achieve focal length variation larger than the Rayleigh length for voltage as small as 12 volts. The system time-response is of the order of 100 ms, with the potential to be reduced with further integration. Finally, the imaging capability of our varifocal metalens is successfully validated in an optical microscopy setting. Compared to conventional bulky reconfigurable lenses, the presented technology is a lightweight and compact solution, offering new opportunities for miniaturized smart imaging devices.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
