Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userLaboratory analogues simulating Titans atmospheric aerosols: Compared chemical compositions of grains and thin films
109
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Two sorts of solid organic samples can be produced in laboratory experiments simulating Titan atmospheric reactivity: grains in the volume and thin films on the reactor walls. We expect that grains are more representative of Titan atmospheric aerosols, but films are used to provide optical indices for radiative models of Titan atmosphere. The aim of the present study is to address if these two sorts of analogues are chemically equivalent or not, when produced in the same N2-CH4 plasma discharge. The chemical compositions of both these materials are measured by using elemental analysis, XPS analysis and Secondary Ion Mass Spectrometry. The main parameter probed is the CH4 N2 ratio to explore various possible chemical regimes. We find that films are homogeneous but significantly less rich in nitrogen and hydrogen than grains produced in the same experimental conditions. This surprising difference in their chemical compositions could be explained by the efficient etching occurring on the films, which stay in the discharge during the whole plasma duration, whereas the grains are ejected after a few minutes. The higher nitrogen content in the grains possibly involves a higher optical absorption than the one measured on the films, with a possible impact on Titan radiative models.
rate research
Read More
The role of polycyclic aromatic hydrocarbons (PAH) and Nitrogen containing PAH (PANH) as intermediates of aerosol production in the atmosphere of Titan has been a subject of controversy for a long time. An analysis of the atmospheric emission band observed by the Visible and Infrared Mapping Spectrometer (VIMS) at 3.28 micrometer suggests the presence of neutral polycyclic aromatic species in the upper atmosphere of Titan. These molecules are seen as the counter part of negative and positive aromatics ions suspected by the Plasma Spectrometer onboard the Cassini spacecraft, but the low resolution of the instrument hinders any molecular speciation. In this work we investigate the specific aromatic content of Titans atmospheric aerosols through laboratory simulations. We report here the selective detection of aromatic compounds in tholins, Titans aerosol analogues, produced with a capacitively coupled plasma in a N2:CH4 95:5 gas mixture. For this purpose, Two-Step Laser Desorption Ionization Time-of-Flight Mass Spectrometry (L2DI-TOF-MS) technique is used to analyze the so produced analogues. This analytical technique is based on the ionization of molecules by Resonance Enhanced Multi-Photon Ionization (REMPI) using a {lambda}=248 nm wavelength laser which is selective for aromatic species. This allows for the selective identification of compounds having at least one aromatic ring. Our experiments show that tholins contain a trace amount of small PAHs with one to three aromatic rings. Nitrogen containing PAHs (PANHs) are also detected as constituents of tholins. Molecules relevant to astrobiology are detected as is the case of the substituted DNA base adenine.
Volatile organic molecules formed by photochemistry in the upper atmosphere of Titan can undergo condensation as pure ices in the stratosphere and the troposphere as well as condense as ice layers onto the organic aerosols that are visible as the haze layers of Titan. As solar photons penetrate through Titan s atmosphere, shorter-wavelength photons are attenuated and longerwavelength photons make it into the lower altitudes, where aerosols become abundant. We conducted an experimental study to evaluate the long wavelength ( > 300 nm) photo-reactivity of these ices accreted on the Titan aerosol-analogs (also known as tholins) made in the laboratory. We have focused on acetylene, the third most abundant hydrocarbon in Titan s atmosphere after CH4 and C2H6. Further, acetylene is the most abundant unsaturated hydrocarbon in Titan s atmosphere. Our results indicate that the aerosols can act as activation centers to drive the photoreactivity of acetylene with the aerosols at the accretion interface at wavelengths where acetylene-ice alone does not show photoreactivity. We found that along with photochemistry, photodesorption plays an important role. We observed that about 15% of the initial acetylene is photodesorbed, with a photodesorption rate of (2.1 +/- 0.2) x 10-6 molecules.photon-1 at 355 nm. This photodesorption is wavelength-dependent, confirming that it is mediated by the UV absorption of the aerosol analogues, similar to photochemistry. We conclude that the UV-Vis properties of aerosols would determine how they evolve further in Titan s atmosphere and on the surface through photochemical alterations involving longer wavelength photons.
Numerous studies have been carried out to characterize the chemical composition of laboratory analogues of Titan aerosols (tholins), but their molecular composition as well as their structure are still poorly known. If pyrolysis gas chromatography mass spectrometry (pyr-GCMS) has been used for years to give clues about this composition, the highly disparate results obtained can be attributed to the analytical conditions used and/or to differences in the nature of the analogues studied. In order to have a better description of Titan tholins molecular composition, we led a systematic analysis of these materials using pyr-GCMS with two major objectives: (i) exploring the analytical parameters to estimate the biases this technique can induce and to find an optimum for analyses allowing the detection of a wide range of compounds and thus a characterization of the tholins composition as comprehensive as possible, and (ii) highlighting the role of the CH4 ratio in the gaseous reactive medium on the tholins molecular structure. With this aim, we used a radio-frequency plasma discharge to synthetize tholins with different concentrations of CH4 diluted in N2. The samples were systematically pyrolyzed from 200 to 600{deg}C. The extracted gases were then analyzed by GCMS for their molecular identification.
Titan, the biggest moon of Saturn, has a thick atmosphere which presents similarities with the one thought to be on Earth at its beginning. The study of Titan s photochemical haze is thus a precious tool in gaining knowledge of the primitive atmosphere of Earth. The chemistry occurring in Titan s atmosphere and the exact processes at act in the formation of the hazes remain largely unknown. The production of analogs samples on Earth has proved to be a useful tool to improve our knowledge of the aerosols formation on Titan. Such solid organic analogs samples, named tholins, were produced with the PAMPRE experiment (French acronym for Aerosols Microgravity Production by Reactive Plasma). PAMPRE tholins were found to be mostly insoluble, with only one-third of the bulk sample that can be dissolved in methanol. This partial solubility limited the previous studies in mass spectrometry, which were done only on the soluble fraction. The goal of the present study is to compare the two fractions of PAMPRE s tholins (insoluble and soluble) using a ultra-high resolution Fourier transform ion cyclotron resonance mass spectrometer (FTICR) equipped with a laser desorption/ionization source. Using modified Van Krevelen diagrams, we compare the global distribution of the molecules within the samples according to their Hydrogen/Carbon ratio and Nitrogen/Carbon ratio. Major differences are observed in the molecular composition of the soluble and the insoluble fraction. The soluble fraction of tholins was previously identified as a set of polymers of average formula (C2H3N)n. In this work we observe that the insoluble fraction of tholins is comprised of a significantly different set of polymers with an average composition of (C4H3N2)n.
Simulations of Titans atmospheric transmission and surface reflectivity have been developed in order to estimate how Titans atmosphere and surface properties could affect performances of the Cassini radar experiment. In this paper we present a selection of models for Titans haze, vertical rain distribution, and surface composition implemented in our simulations. We collected dielectric constant values for the Cassini radar wavelength ($sim 2.2$ cm) for materials of interest for Titan: liquid methane, liquid mixture of methane-ethane, water ice and light hydrocarbon ices. Due to the lack of permittivity values for Titans haze particles in the microwave range, we performed dielectric constant ($varepsilon_r$) measurements around 2.2 cm on tholins synthesized in laboratory. We obtained a real part of $varepsilon_r$ in the range of 2-2.5 and a loss tangent between $10^{-3}$ and $5.10^{-2}$. By combining aerosol distribution models (with hypothetical condensation at low altitudes) to surface models, we find the following results: (1) Aerosol-only atmospheres should cause no loss and are essentially transparent for Cassini radar, as expected by former analysis. (2) However, if clouds are present, some atmospheric models generate significant attenuation that can reach $-50 dB$, well below the sensitivity threshold of the receiver. In such cases, a $13.78 GHz$ radar would not be able to measure echoes coming from the surface. We thus warn about possible risks of misinterpretation if a textquotedblleft wet atmospheretextquotedblright $ $is not taken into account. (3) Rough surface scattering leads to a typical response of $sim -17 dB$. These results will have important implications on future Cassini radar data analysis.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
