Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMisaligned ring resonator with a lens-like medium
142
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The paper presents a theoretical study of the eigenmodes of a misaligned ring multi-mirror laser cavity one or several arms of which are filled with an inhomogeneous medium. We start with posing the general problem of calculation of the radiation characteristics for a ring resonator with arbitrary inhomogeneities of the medium and mirrors, in the paraxial approximation. Then the general relations are specified for the lens-like resonator model in which the real and imaginary parts of the refractive index, as well as the phase and amplitude corrections performed by the mirrors, quadratically depend on the transverse coordinates. Explicit expressions are obtained for the eigen frequency and spatial characteristics of the radiation via the coefficients of the Hermite-Gaussian functions describing the complex amplitude distributions at the mirrors. The main results are formulated in terms of linear relations between positions of the resonator mode axis at the mirrors and the misalignment parameters (small shifts and tilts of the mirrors). The explicit results display the coefficients of the above linear relations. They are calculated for the 3-mirror cavity with using a specially developed approach employing peculiar conditions to the coefficients form that follow from very general considerations of two groups: 1) Independence of the resulting frequency shifts on the sequence in which the misalignments are made (this is the base of the energy method for the resonator analysis, which is essentially generalized and improved); 2) Geometrical symmetry of the resonator. The results of calculations can be used in order to control the radiation characteristics in relation to the resonator misalignments, in particular, for analysis of the output radiation stability and sensitivity to small changes of the cavity configuration.
rate research
Read More
Unidirectional photonic edge states arise at the interface between two topologically-distinct photonic crystals. Here, we demonstrate a micron-scale GaAs photonic ring resonator, created using a spin Hall-type topological photonic crystal waveguide. Embedded InGaAs quantum dots are used to probe the mode structure of the device. We map the spatial profile of the resonator modes, and demonstrate control of the mode confinement through tuning of the photonic crystal lattice parameters. The intrinsic chirality of the edge states makes them of interest for applications in integrated quantum photonics, and the resonator represents an important building block towards the development of such devices with embedded quantum emitters.
The frequency stability of lasers is limited by thermal noise in state-of-the-art frequency references. Further improvement requires operation at cryogenic temperature. In this context, we investigate a fiber-based ring resonator. Our system exhibits a first-order temperature-insensitive point around $3.55$ K, much lower than that of crystalline silicon. The observed low sensitivity with respect to vibrations ($<5cdot{10^{-11}},text{m}^{-1} text{s}^{2}$), temperature ($-22(1)cdot{10^{-9}},text{K}^{-2}$) and pressure changes ($4.2(2)cdot{10^{-11}},text{mbar}^{-2}$) makes our approach promising for future precision experiments.
A topologically protected ring-resonator formed in valley photonic crystals is proposed and fabricated on a silicon slab. The unidirectional transmission and robustness against structure defects of its resonant modes are illustrated. Coupled with topological waveguides, the topological ring is functioned as notch and channel-drop filters. The work opens up a new avenue for developing advanced chip-integrated photonic circuits with attributes of topological photonics.
Microcombs -- optical frequency combs generated in coherently-driven nonlinear microresonators -- have attracted significant attention over the last decade. The ability to generate two such combs in a single resonator device has in particular enabled a host of applications from spectroscopy to imaging. Concurrently, novel comb generation techniques such as synchronous pulsed driving have been developed to enhance the efficiency and flexibility of microcomb generation. Here we report on the first experimental demonstration of dual-microcomb generation via synchronous pulsed pumping of a single microresonator. Specifically, we use two electro-optically generated pulse trains derived from a common continuous wave laser to simultaneously drive two orthogonal polarization modes of an integrated silica ring resonator, observing the generation of coherent dissipative Kerr cavity soliton combs on both polarization axes. Thanks to the resonator birefringence, the two soliton combs are associated with different repetition rates, thus realizing a dual-microcomb source. To illustrate the sources application potential, we demonstrate proof-of-concept spectroscopic measurements.
Photon sources are fundamental components for any quantum photonic technology. The ability to generate high count-rate and low-noise correlated photon pairs via spontaneous parametric down-conversion using bulk crystals has been the cornerstone of modern quantum optics. However, future practical quantum technologies will require a scalable integration approach, and waveguide-based photon sources with high-count rate and low-noise characteristics will be an essential part of chip-based quantum technologies. Here, we demonstrate photon pair generation through spontaneous four-wave mixing in a silicon micro-ring resonator, reporting a maximum coincidence-to-accidental (CAR) ratio of 602 (+-) 37, and a maximum photon pair generation rate of 123 MHz (+-) 11 KHz. To overcome free-carrier related performance degradations we have investigated reverse biased p-i-n structures, demonstrating an improvement in the pair generation rate by a factor of up to 2, with negligible impact on CAR.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
