Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userContact Research Strategy for Emerging Molybdenum Disulfide and Other Two-Dimensional Field-effect Transistors
293
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Layered two-dimensional (2D) semiconducting transition metal dichalcogenides (TMD) have been widely isolated, synthesized, and characterized recently. Numerous 2D materials are identified as the potential candidates as channel materials for future thin film technology due to their high mobility and the exhibiting bandgaps. While many TMD filed-effect transistors (FETs) have been widely demonstrated along with a significant progress to clearly understand the device physics, large contact resistance at metal/semiconductor interface still remain a challenge. From 2D device research point of view, how to minimize the Schottky barrier effects on contacts thus reduce the contact resistance of metals on 2D materials is very critical for the further development of the field. Here, we present a review of contact research on molybdenum disulfide and other TMD FETs from the fundamental understanding of metal-semiconductor interfaces on 2D materials. A clear contact research strategy on 2D semiconducting materials is developed for future high-performance 2D FETs with aggressively scaled dimensions.
rate research
Read More
Semiconducting two-dimensional (2D) transition metal dichalcogenides (TMDs) are emerging as top candidates for post-silicon electronics. While most of 2D TMDs exhibit isotropic behavior, lowering the lattice symmetry could induce anisotropic properties, which are both scientifically interesting and potentially useful. Here, we present atomically thin rhenium disulfide (ReS2) flakes with a unique distorted 1T structure, which exhibit in-plane anisotropic properties. We fabricated mono- and few-layer ReS2 field effect transistors (FETs), which exhibit competitive performance with large current on/off ratios (~107) and low subthreshold swings (100 mV dec-1). The observed anisotropic ratio along two principle axes reaches 3.1, which is the highest among all known 2D semiconducting materials. Furthermore, we successfully demonstrated an integrated digital inverter with good performance by utilizing two ReS2 anisotropic FETs, suggesting the promising implementation of large-scale 2D logic circuits. Our results underscore the unique properties of 2D semiconducting materials with low crystal symmetry for future electronic applications.
Doping is an effective way to modify the electronic property of two-dimensional (2D) materials and endow them with new functionalities. However, wide-range control of the substitutional doping concentration with large scale uniformity remains challenging in 2D materials. Here we report in-situ chemical vapor deposition growth of vanadium (V) doped monolayer molybdenum disulfide (MoS2) with widely tunable doping concentrations ranging from 0.3 to 13.1 at%. The key to regulate the doping concentration lies in the use of appropriate V precursors with different doping abilities, which also generate a large-scale uniform doping effect. Artificial synaptic transistors were fabricated by using the heavily doped MoS2 as the channel material for the first time. Synaptic potentiation, depression and repetitive learning processes are mimicked by the gate-tunable channel conductance change in such transistors with abundant V atoms to trap/detrap electrons. This work shows a feasible method to dope monolayer 2D semiconductors and demonstrates their use in artificial synaptic transistors.
Atomically-thin two-dimensional (2D) layered transition metal dichalcogenides (TMDs) have been extensively studied in recent years because of their appealing electrical and optical properties. Here, we report on the fabrication of ReS2 field-effect transistors via the encapsulation of ReS2 nanosheets in a high-k{appa} Al2O3 dielectric environment. Low-temperature transport measurements allowed us to observe a direct metal-to-insulator transition originating from strong electron-electron interactions. Remarkably, the photodetectors based on ReS2 exhibit gate-tunable photoresponsivity up to 16.14 A/W and external quantum efficiency reaching 3,168 %, showing a competitive device performance to those reported in graphene, MoSe2, GaS and GaSe-based photodetectors. Our study unambiguously distinguishes ReS2 as a new candidate for future applications in electronics and optoelectronics.
The two-dimensional (2D) semiconductor molybdenum disulfide (MoS2) has attracted widespread attention for its extraordinary electrical, optical, spin and valley related properties. Here, we report on spin polarized tunneling through chemical vapor deposited (CVD) multilayer MoS2 (~7 nm) at room temperature in a vertically fabricated spin-valve device. A tunnel magnetoresistance (TMR) of 0.5 - 2 % has been observed, corresponding to spin polarization of 5 - 10 % in the measured temperature range of 300 - 75 K. First principles calculations for ideal junctions results in a tunnel magnetoresistance up to 8 %, and a spin polarization of 26 %. The detailed measurements at different temperatures and bias voltages, and density functional theory calculations provide information about spin transport mechanisms in vertical multilayer MoS2 spin-valve devices. These findings form a platform for exploring spin functionalities in 2D semiconductors and understanding the basic phenomenon that control their performance.
Molybdenum disulfide (MoS2) is a particularly interesting member of the family of two-dimensional (2D) materials due to its semiconducting and tunable electronic properties. Currently, the most reliable method for obtaining high-quality industrial scale amounts of 2D materials is chemical vapor deposition (CVD), which results in polycrystalline samples. As grain boundaries (GBs) are intrinsic defect lines within CVD-grown 2D materials, their atomic structure is of paramount importance. Here, through atomic-scale analysis of micrometer-long GBs, we show that covalently bound boundaries in 2D MoS2 tend to be decorated by nanopores. Such boundaries occur when differently oriented MoS2 grains merge during growth, whereas the overlap of grains leads to boundaries with bilayer areas. Our results suggest that the nanopore formation is related to stress release in areas with a high concentration of dislocation cores at the grain boundaries, and that the interlayer interaction leads to intrinsic rippling at the overlap regions. This provides insights for the controlled fabrication of large-scale MoS 2 samples with desired structural properties for applications.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
