Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userInfrared transmission spectroscopy of charge carriers in self-assembled InAs quantum dots under surface electric fields
349
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We present a study on the intersublevel spacings of electrons and holes in a single layer of InAs self-assembled quantum dots (SAQDs) using Fourier transform infrared (FTIR) transmission spectroscopy without the application of an external magnetic field. Epitaxial, complementary-doped and semi-transparent electrostatic gates are grown within the ultra high vacuum conditions of molecular beam epitaxy to voltage-tune the device, while a two dimensional electron gas (2DEG) serves as back contact. Spacings of the hole sublevels are indirectly calculated using the photoluminescence spectroscopy along with FTIR spectroscopy. The observed spacings fit well to the calculated values for both electrons and holes. Additionally, the intersubband resonances of the 2DEG are enhanced due to the QD layer on top of the device.
rate research
Read More
Measuring single-electron charge is one of the most fundamental quantum technologies. Charge sensing, which is an ingredient for the measurement of single spins or single photons, has been already developed for semiconductor gate-defined quantum dots, leading to intensive studies on the physics and the applications of single-electron charge, single-electron spin and photon-electron quantum interface. However, the technology has not yet been realized for self-assembled quantum dots despite their fascinating quantum transport phenomena and outstanding optical functionalities. In this paper, we report charge sensing experiments in self-assembled quantum dots. We choose two adjacent dots, and fabricate source and drain electrodes on each dot, in which either dot works as a charge sensor for the other target dot. The sensor dot current significantly changes when the number of electrons in the target dot changes by one, demonstrating single-electron charge sensing. We have also demonstrated real-time detection of single-electron tunnelling events. This charge sensing technique will be an important step towards combining efficient electrical readout of single-electron with intriguing quantum transport physics or advanced optical and photonic technologies developed for self-assembled quantum dots.
We investigate the thermal quenching of the multimodal photoluminescence from InAs/InP (001) self-assembled quantum dots. The temperature evolution of the photoluminescence spectra of two samples is followed from 10 K to 300 K. We develop a coupled rate-equation model that includes the effect of carrier thermal escape from a quantum dot to the wetting layer and to the InP matrix, followed by transport, recapture or non-radiative recombination. Our model reproduces the temperature dependence of the emission of each family of quantum dots with a single set of parameters. We find that the main escape mechanism of the carriers confined in the quantum dots is through thermal emission to the wetting layer. The activation energy for this process is found to be close to one-half the energy difference between that of a given family of quantum dots and that of the wetting layer as measured by photoluminescence excitation experiments. This indicates that electron and holes exit the InAs quantum dots as correlated pairs.
We investigate the electronic structure of the InAs/InP quantum dots using an atomistic pseudopotential method and compare them to those of the InAs/GaAs QDs. We show that even though the InAs/InP and InAs/GaAs dots have the same dot material, their electronic structure differ significantly in certain aspects, especially for holes: (i) The hole levels have a much larger energy spacing in the InAs/InP dots than in the InAs/GaAs dots of corresponding size. (ii) Furthermore, in contrast with the InAs/GaAs dots, where the sizeable hole $p$, $d$ intra-shell level splitting smashes the energy level shell structure, the InAs/InP QDs have a well defined energy level shell structure with small $p$, $d$ level splitting, for holes. (iii) The fundamental exciton energies of the InAs/InP dots are calculated to be around 0.8 eV ($sim$ 1.55 $mu$m), about 200 meV lower than those of typical InAs/GaAs QDs, mainly due to the smaller lattice mismatch in the InAs/InP dots. (iii) The widths of the exciton $P$ shell and $D$ shell are much narrower in the InAs/InP dots than in the InAs/GaAs dots. (iv) The InAs/GaAs and InAs/InP dots have a reversed light polarization anisotropy along the [100] and [1$bar{1}$0] directions.
A detailed study of the $g$-factor anisotropy of electrons and holes in InAs/In$_{0.53}$Al$_{0.24}$Ga$_{0.23}$As self-assembled quantum dots emitting in the telecom spectral range of $1.5-1.6$ $mu$m (around 0.8 eV photon energy) is performed by time-resolved pump-probe ellipticity technique using a superconducting vector magnet. All components of the $g$-factor tensors are measured, including their spread in the quantum dot (QD) ensemble. Surprisingly, the electron $g$ factor shows a large anisotropy changing from $g_{mathrm{e},x}= -1.63$ to $g_{mathrm{e},z}= -2.52$ between directions perpendicular and parallel to the dot growth axis, respectively, at an energy of 0.82 eV. The hole $g$-factor anisotropy at this energy is even stronger: $|g_{text{h},x}|= 0.64$ and $|g_{text{h},z}|= 2.29$. On the other hand, the in-plane anisotropies of electron and hole $g$ factors are small. The pronounced out-of-plane anisotropy is also observed for the spread of the $g$ factors, determined from the spin dephasing time. The hole longitudinal $g$ factors are described with a theoretical model that allows us to estimate the QD parameters. We find that the QD height-to-diameter ratio increases while the indium composition decreases with increasing QD emission energy.
We report on capacitance-voltage spectroscopy of self-assembled InAs quantum dots under constant illumination. Besides the electronic and excitonic charging peaks in the spectrum reported earlier, we find additional resonances associated with nonequilibrium state tunneling unseen in C(V) measurements before. We derive a master-equation based model to assign the corresponding quantum state tunneling to the observed peaks. C(V) spectroscopy in a magnetic field is used to verify the model-assigned nonequilibrium peaks. The model is able to quantitatively address various experimental findings in C(V) spectroscopy of quantum dots such as the frequency and illumination dependent peak height, a thermal shift of the tunneling resonances and the occurrence of the additional nonequilibrium peaks.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
