Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userThe Primordial Inflation Polarization Explorer (PIPER)
141
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The Primordial Inflation Polarization Explorer (PIPER) is a balloon-borne cosmic microwave background (CMB) polarimeter designed to search for evidence of inflation by measuring the large-angular scale CMB polarization signal. BICEP2 recently reported a detection of B-mode power corresponding to the tensor-to-scalar ratio r = 0.2 on ~2 degree scales. If the BICEP2 signal is caused by inflationary gravitational waves (IGWs), then there should be a corresponding increase in B-mode power on angular scales larger than 18 degrees. PIPER is currently the only suborbital instrument capable of fully testing and extending the BICEP2 results by measuring the B-mode power spectrum on angular scales $theta$ = ~0.6 deg to 90 deg, covering both the reionization bump and recombination peak, with sensitivity to measure the tensor-to-scalar ratio down to r = 0.007, and four frequency bands to distinguish foregrounds. PIPER will accomplish this by mapping 85% of the sky in four frequency bands (200, 270, 350, 600 GHz) over a series of 8 conventional balloon flights from the northern and southern hemispheres. The instrument has background-limited sensitivity provided by fully cryogenic (1.5 K) optics focusing the sky signal onto four 32x40-pixel arrays of time-domain multiplexed Transition-Edge Sensor (TES) bolometers held at 140 mK. Polarization sensitivity and systematic control are provided by front-end Variable-delay Polarization Modulators (VPMs), which rapidly modulate only the polarized sky signal at 3 Hz and allow PIPER to instantaneously measure the full Stokes vector (I, Q, U, V) for each pointing. We describe the PIPER instrument and progress towards its first flight.
rate research
Read More
The Primordial Inflation Polarization ExploreR (PIPER) is a balloon-borne telescope designed to measure the polarization of the Cosmic Microwave Background on large angular scales. PIPER will map 85% of the sky at 200, 270, 350, and 600 GHz over a series of 8 conventional balloon flights from the northern and southern hemispheres. The first science flight will use two 32x40 arrays of backshort-under-grid transition edge sensors, multiplexed in the time domain, and maintained at 100 mK by a Continuous Adiabatic Demagnetization Refrigerator. Front-end cryogenic Variable-delay Polarization Modulators provide systematic control by rotating linear to circular polarization at 3 Hz. Twin telescopes allow PIPER to measure Stokes I, Q, U, and V simultaneously. The telescope is maintained at 1.5 K in an LHe bucket dewar. Cold optics and the lack of a warm window permit sensitivity at the sky-background limit. The ultimate science target is a limit on the tensor-to-scalar ratio of r ~ 0.007, from the reionization bump to l ~ 300. PIPERs first flight will be from the Northern hemisphere, and overlap with the CLASS survey at lower frequencies. We describe the current status of the PIPER instrument.
Measuring the faint polarization signal of the cosmic microwave background (CMB) not only requires high optical throughput and instrument sensitivity but also control over systematic effects. Polarimetric cameras or receivers used in this setting often employ dielectric vacuum windows, filters, or lenses to appropriately prepare light for detection by cooled sensor arrays. These elements in the optical chain are typically designed to minimize reflective losses and hence improve sensitivity while minimizing potential imaging artifacts such as glint and ghosting. The Primordial Inflation Polarization ExploreR (PIPER) is a balloon-borne instrument designed to measure the polarization of the CMB radiation at the largest angular scales and characterize astrophysical dust foregrounds. PIPERs twin telescopes and detector systems are submerged in an open-aperture liquid helium bucket dewar. A fused-silica window anti-reflection (AR) coated with polytetrafluoroethylene (PTFE) is installed on the vacuum cryostat that houses the cryogenic detector arrays. Light passes from the skyward portions of the telescope to the detector arrays though this window, which utilizes an indium seal to prevent superfluid helium leaks into the vacuum cryostat volume. The AR coating implemented reduces reflections from each interface to <1% compared to ~10% from an uncoated window surface. The AR coating procedure and room temperature optical measurements of the window are presented. The indium vacuum sealing process is also described in detail and test results characterizing its integrity to superfluid helium leaks are provided.
The Primordial Inflation Polarization Explorer (PIPER) is a stratospheric balloon payload to measure polarization of the cosmic microwave background. Twin telescopes mounted within an open-aperture bucket dewar couple the sky to bolometric detector arrays. We reduce detector loading and photon noise by cooling the entire optical chain to 1.7 K or colder. A set of fountain-effect pumps sprays superfluid liquid helium onto each optical surface, producing helium flows of 50--100 cm^3 / s at heights up to 200 cm above the liquid level. We describe the fountain-effect pumps and the cryogenic performance of the PIPER payload during two flights in 2017 and 2019.
The Primordial Inflation Explorer (PIXIE) is an Explorer-class mission concept to measure cosmological signals from both linear polarization of the cosmic microwave background and spectral distortions from a perfect blackbody. The targeted measurement sensitivity is 2--4 orders of magnitude below competing astrophysical foregrounds, placing stringent requirements on instrument calibration. An on-board blackbody calibrator presents a polarizing Fourier transform spectrometer with a known signal to enable conversion of the sampled interference fringe patterns from telemetry units to physical units. We describe the instrumentation and operations needed to calibrate PIXIE, derive the expected uncertainty for the intensity, polarization, and frequency scales, and show the effect of calibration uncertainty in the derived cosmological signals. In-flight calibration is expected to be accurate to a few parts in $10^6$ at frequencies dominated by the CMB, and a few parts in $10^4$ at higher frequencies dominated by the diffuse dust foreground.
The LSPE is a balloon-borne mission aimed at measuring the polarization of the Cosmic Microwave Background (CMB) at large angular scales, and in particular to constrain the curl component of CMB polarization (B-modes) produced by tensor perturbations generated during cosmic inflation, in the very early universe. Its primary target is to improve the limit on the ratio of tensor to scalar perturbations amplitudes down to r = 0.03, at 99.7% confidence. A second target is to produce wide maps of foreground polarization generated in our Galaxy by synchrotron emission and interstellar dust emission. These will be important to map Galactic magnetic fields and to study the properties of ionized gas and of diffuse interstellar dust in our Galaxy. The mission is optimized for large angular scales, with coarse angular resolution (around 1.5 degrees FWHM), and wide sky coverage (25% of the sky). The payload will fly in a circumpolar long duration balloon mission during the polar night. Using the Earth as a giant solar shield, the instrument will spin in azimuth, observing a large fraction of the northern sky. The payload will host two instruments. An array of coherent polarimeters using cryogenic HEMT amplifiers will survey the sky at 43 and 90 GHz. An array of bolometric polarimeters, using large throughput multi-mode bolometers and rotating Half Wave Plates (HWP), will survey the same sky region in three bands at 95, 145 and 245 GHz. The wide frequency coverage will allow optimal control of the polarized foregrounds, with comparable angular resolution at all frequencies.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
