Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMeasurements of Elastic Properties of Langatate at Liquid Helium Temperatures for design of ultra low loss mechanical systems
95
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We present full characterisation of acoustic wave devices based on the fully synthetic crystalline material at the liquid helium temperature range { required for the design of ultra low loss mechanical systems in many areas of research including frequency control and fundamental measurements}. Temperature coefficients of the effective elastic tensor of Langatate (LGT) in Lagrangian representation are determined for the temperature range $3.8-15$K. The Lagrangian formalism is mandatory in the analysed situation since the expansion coefficients of the LGT are still unknown at these temperatures. The measurement method involves a set of high-quality resonators of various cut angles, and uses measurements of frequency-temperature relations to extract the temperature coefficients of the elastic tensor. In addition, power sensitivity of LGT resonators at cryogenic temperatures is determined and dominant loss mechanism is identified.
rate research
Read More
We carried out a study of the pressure dependence of the solidification temperature in nine pressure transmitting media that are liquid at ambient temperature, under pressures up to 2.3 GPa. These fluids are: 1:1 isopentane/n-pentane, 4:6 light mineral oil/n-pentane, 1:1 isoamyl alcohol/n-pentane, 4:1 methanol/ethanol, 1:1 FC72/FC84 (Fluorinert), Daphne 7373, isopentane, and Dow Corning PMX silicone oils 200 and 60,000 cst. We relied on the sensitivity of the electrical resistivity of Ba(Fe1-xRux)2As2 single crystals to the freezing of the pressure media, and cross-checked with corresponding anomalies observed in the resistance of the manganin coil that served as the ambient temperature resistive manometer. In addition to establishing the Temperature-Pressure line separating the liquid (hydrostatic) and frozen (non-hydrostatic) phases, these data permit rough estimates of the freezing pressure of these media at ambient temperature. This pressure establishes the extreme limit for the medium to be considered hydrostatic. For higher applied pressures the medium has to be treated as non-hydrostatic.
We report a study on the electrical properties of 19 nm thick Yttrium Iron Garnet (YIG) films grown by liquid phase epitaxy. The electrical conductivity and Hall coefficient are measured in the high temperature range [300,400]~K using a Van der Pauw four-point probe technique. We find that the electrical resistivity decreases exponentially with increasing temperature following an activated behavior corresponding to a band-gap of $E_gapprox 2$ eV, indicating that epitaxial YIG ultra-thin films behave as large gap semiconductor, and not as electrical insulator. The resistivity drops to about $5times 10^3$~$Omega cdot text{cm}$ at $T=400$ K. We also infer the Hall mobility, which is found to be positive ($p$-type) at 5 cm$^2$/(V$cdot$sec) and about independent of temperature. We discuss the consequence for non-local transport experiments performed on YIG at room temperature. These electrical properties are responsible for an offset voltage (independent of the in-plane field direction) whose amplitude, odd in current, grows exponentially with current due to Joule heating. These electrical properties also induce a sensitivity to the perpendicular component of the magnetic field through the Hall effect. In our lateral device, a thermoelectric offset voltage is produced by a temperature gradient along the wire direction proportional to the perpendicular component of the magnetic field (Righi-Leduc effects).
The MechElastic Python package evaluates the mechanical and elastic properties of bulk and 2D materials using the elastic coefficient matrix ($C_{ij}$) obtained from any ab-initio density-functional theory (DFT) code. The current version of this package reads the output of VASP, ABINIT, and Quantum Espresso codes (but it can be easily generalized to any other DFT code) and performs the appropriate post-processing of elastic constants as per the requirement of the user. This program can also detect the input structures crystal symmetry and test the mechanical stability of all crystal classes using the Born-Huang criteria. Various useful material-specific properties such as elastic moduli, longitudinal and transverse elastic wave velocities, Debye temperature, elastic anisotropy, 2D layer modulus, hardness, Pughs ratio, Cauchys pressure, Kleinman parameter, and Lames coefficients, can be estimated using this program. Another existing feature of this program is to employ the ELATE package [J. Phys.: Condens. Matter 28, 275201 (2016)] and plot the spatial variation of several elastic properties such as Poissons ratio, linear compressibility, shear modulus, and Youngs modulus in three dimensions. Further, the MechElastic package can plot the equation of state (EOS) curves for energy and pressure for a variety of EOS models such as Murnaghan, Birch, Birch-Murnaghan, and Vinet, by reading the inputted energy/pressure versus volume data obtained via numerical calculations or experiments. This package is particularly useful for the high-throughput analysis of elastic and mechanical properties of materials.
In organic bulk heterojunction solar cells, the open circuit voltage ($V_mathrm{oc}$) suffers from an ultra-high loss at low temperatures. In this work we investigate the origin of the loss through calculating the $V_mathrm{oc}-T$ plots with the device model method systematically and comparing it with experimentally observed ones. When the energetic disorder is incorporated into the model by considering the disorder-suppressed and temperature-dependent charge carrier mobilities, it is found that for nonselective contacts the $V_mathrm{oc}$ reduces drastically under the low temperature regime, while for selective contacts the $V_mathrm{oc}$ keeps increasing with the decreasing temperature. The main reason is revealed that as the temperature decreases, the reduced mobilities give rise to low charge extraction efficiency and small bimolecular recombination rate for the photogenerated charge carriers, so that in the former case they can be extracted from the wrong electrode to form a leakage current which counteracts the photocurrent and increases quickly with voltage, leading to the anomalous reduction of $V_mathrm{oc}$. In addition, it is revealed that the charge generation rate is slow-varying with temperature and does not induce significant $V_mathrm{oc}$ loss. This work also provides a comprehensive picture for the $V_mathrm{oc}$ behavior under varying device working conditions.
On the basis of the first principles simulation, the structure, formation enthalpy, and mechanical properties (elastic constant, bulk, and shear modulus and hardness) of five Nb-doped Ni systems are systematically studied. The calculated equilibrium volume increases with the Nb concentration increasing. The computational elastic constants and formation enthalpy indicate that all Nb-doped Ni systems are mechanically and thermodynamically stable in our research. The hardness of these systems also be predicted after the bulk modulus and shear modulus have been accurately calculated. The results show that the hardness increases with the Nb concentration increasing when the Nb concentration below 4.9%, beyond which the hardness will decrease within the scope of our study.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
