Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userStatus of the CTA medium size telescope prototype
108
0
0.0
(
0
)
Authors
Juergen Baehr
Ask ChatGPT about the research
No Arabic abstract
We present here the status of the medium size prototype for the Cherenkov Telescope Array. The main reasons to build the prototype are the test of the steel structure, the training of various mounting operations, the test of the drive system and the test of the safety system. The essential difference between the medium size telescope prototype and a fully instrumented are that the camera is not instrumented and only a part of the mounted mirrors are optical mirrors. Insofar no high energy gamma rays can be detected by the prototype telescope. The prototype will be setup in autumn 2012 in Berlin.
rate research
Read More
Pointing calibration is an offline correction applied in order to obtain the true pointing direction of a telescope. The Cherenkov Telescope Array (CTA) aims to have the precision to determine the position of point-like as well as slightly extended sources, with the goal of systematic errors less than 7 arc seconds in space angle. This poster describes the pointing calibration concept being developed for the CTA Medium Size Telescope (MST) prototype at Berlin-Adlershof, showing test results and preliminary measurements. The MST pointing calibration method uses two CCD cameras, mounted on the telescope dish, to determine the true pointing of the telescope. The Lid CCD is aligned to the optical axis of the telescope, calibrated with LEDs on the dummy gamma-camera lid; the Sky CCD is pre-aligned to the Lid CCD and the transformation between the Sky and Lid CCD camera fields of view is precisely modelled with images from special pointing runs which are also used to determine the pointing model. During source tracking, the CCD cameras record images which are analysed offline using software tools including Astrometry.net to determine the true pointing coordinates.
The Cherenkov Telescope Array (CTA) is a future very high energy gamma-ray observatory. CTA will be comprised of small-,medium- and large-size telescopes covering an energy range from tens of GeV to hundreds of TeV and will surpass existing telescopes in sensitivity by an order of magnitude. The aim of our study is to find the optimal design for the medium-size telescopes (MSTs), which will determine the sensitivity in the key energy range between a few hundred GeV to about ten TeV. To study the effect of the telescope design parameters on the array performance, we simulated arrays of 61 MSTs with 120 m spacing and a variety of telescope configurations. We investigated the influence of the primary telescope characteristics including optical resolution, pixel size, and light collection area on the total array performance with a particular emphasis on telescope configurations with imaging performance similar to the proposed Davies-Cotton (DC) and Schwarzschild-Couder (SC) MST designs. We compare the performance of these telescope designs, especially the achieved gamma-ray angular resolution and differential point-source sensitivity. Finally we investigate the performance of different array sizes to demonstrate impacts of financial constraints on the number of telescopes.
We present studies for optimizing the next generation of ground-based imaging atmospheric Cherenkov telescopes (IACTs). Results focus on mid-sized telescopes (MSTs) for CTA, detecting very high energy gamma rays in the energy range from a few hundred GeV to a few tens of TeV. We describe a novel, flexible detector Monte Carlo package, FAST (FAst Simulation for imaging air cherenkov Telescopes), that we use to simulate different array and telescope designs. The simulation is somewhat simplified to allow for efficient exploration over a large telescope design parameter space. We investigate a wide range of telescope performance parameters including optical resolution, camera pixel size, and light collection area. In order to ensure a comparison of the arrays at their maximum sensitivity, we analyze the simulations with the most sensitive techniques used in the field, such as maximum likelihood template reconstruction and boosted decision trees for background rejection. Choosing telescope design parameters representative of the proposed Davies-Cotton (DC) and Schwarzchild-Couder (SC) MST designs, we compare the performance of the arrays by examining the gamma-ray angular resolution and differential point-source sensitivity. We further investigate the array performance under a wide range of conditions, determining the impact of the number of telescopes, telescope separation, night sky background, and geomagnetic field. We find a 30-40% improvement in the gamma-ray angular resolution at all energies when comparing arrays with an equal number of SC and DC telescopes, significantly enhancing point-source sensitivity in the MST energy range. We attribute the increase in point-source sensitivity to the improved optical point-spread function and smaller pixel size of the SC telescope design.
The upcoming Cherenkov Telescope Array (CTA) ground-based gamma-ray observatory will open up our view of the very high energy Universe, offering an improvement in sensitivity of 5-10 times that of previous experiments. NectarCAM is one of the proposed cameras for the Medium-Sized Telescopes (MST) which have been designed to cover the core energy range of CTA, from 100 GeV to 10 TeV. The final camera will be capable of GHz sampling and provide a field of view of 8 degrees with its 265 modules of 7 photomultiplier each (for a total of 1855 pixels). In order to validate the performance of NectarCAM, a partially-equipped prototype has been constructed consisting of only the inner 61-modules. It has so far undergone testing at the integration test-bench facility in CEA Paris-Saclay (France) and on a prototype of the MST structure in Adlershof (Germany). To characterize the performance of the prototype, Monte Carlo simulations were conducted using a detailed model of the 61 module camera in the CORSIKA/sim_telarray framework. This contribution provides an overview of this work including the comparison of trigger and readout performance on test-bench data and trigger and image parameterization performance during on-sky measurements.
A Large Size air Cherenkov Telescope (LST) prototype, proposed for the Cherenkov Telescope Array (CTA), is under construction at the Canary Island of La Palma (Spain) this year. The LST camera, which comprises an array of about 500 photomultipliers (PMTs), requires a precise and regular calibration over a large dynamic range, up to $10^3$ photo-electrons (pes), for each PMT. We present a system built to provide the optical calibration of the camera consisting of a pulsed laser (355 nm wavelength, 400 ps pulse width), a set of filters to guarantee a large dynamic range of photons on the sensors, and a diffusing sphere to uniformly spread the laser light, with flat fielding within 3%, over the camera focal plane 28 m away. The prototype of the system developed at INFN is hermetically closed and filled with dry air to make the system completely isolated from the external environment. In the paper we present the results of the tests for the evaluation of the photon density at the camera plane, the system isolation from the environment, and the shape of the signal as detected by the PMTs. The description of the communication of the system with the rest of detector is also given.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
