Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userA dedicated tool for a full 3D Cn2 investigation
128
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We present in this study a mapping of the optical turbulence (OT) above different astronomical sites. The mesoscale model Meso-NH was used together with the Astro-Meso-Nh package and a set of diagnostic tools allowing for a full 3D investigation of the Cn2. The diagnostics implemented in the Astro-Meso-Nh, allowing for a full 3D investigation of the OT structure in a volumetric space above different sites, are presented. To illustrate the different diagnostics and their potentialities, we investigated one night and looked at instantaneous fields of meteorologic and astroclimatic parameters. To show the potentialities of this tool for applications in an Observatory we ran the model above sites with very different OT distributions: the antarctic plateau (Dome C, Dome A, South Pole) and a mid-latitude site (Mt. Graham, Arizona). We put particular emphasis on the 2D maps of integrated astroclimatic parameters (seeing, isoplanatic angles) calculated in different slices at different heights in the troposhere. This is an useful tool of prediction and investigation of the turbulence structure. It can support the optimization of the AO, GLAO and MCAO systems running at the focus of the ground-based telescopes.From this studies it emerges that the astronomical sites clearly present different OT behaviors. Besides, our tool allowed us for discriminating these sites.
rate research
Read More
Wide Field Adaptive Optics (WFAO) systems represent the more sophisticated AO systems available today at large telescopes. A critical aspect for these WFAO systems in order to deliver an optimised performance is the knowledge of the vertical spatiotemporal distribution of the CN2 and the wind speed. Previous studies (Cortes et al., 2012) already proved the ability of GeMS (the Gemini Multi-Conjugated AO system) in retrieving CN2 and wind vertical stratification using the telemetry data. To assess the reliability of the GeMS wind speed estimates a preliminary study (Neichel et al., 2014) compared wind speed retrieved from GeMS with that obtained with the atmospherical model Meso-Nh on a small sample of nights providing promising results. The latter technique is very reliable for the wind speed vertical stratification. The model outputs gave, indeed, an excellent agreement with a large sample of radiosoundings (~ 50) both in statistical terms and on individual flights (Masciadri et al., 2013). Such a tool can therefore be used as a valuable reference in this exercise of cross calibrating GeMS on-sky wind estimates with model predictions. In this contribution we achieved a two-fold results: (1) we extended analysis on a much richer statistical sample (~ 43 nights), we confirmed the preliminary results and we found an even better correlation between GeMS observations and the atmospherical model with basically no cases of not-negligible uncertainties; (2) we evaluate the possibility to use, as an input for GeMS, the Meso-Nh estimates of the wind speed stratification in an operational configuration. Under this configuration these estimates can be provided many hours in advanced with respect to the observations and with a very high temporal frequency (order of 2 minutes or less).
We present a method to constrain galaxy parameters directly from three-dimensional data cubes. The algorithm compares directly the data with a parametric model mapped in $x,y,lambda$ coordinates. It uses the spectral lines-spread function (LSF) and the spatial point-spread function (PSF) to generate a three-dimensional kernel whose characteristics are instrument specific or user generated. The algorithm returns the intrinsic modeled properties along with both an `intrinsic model data cube and the modeled galaxy convolved with the 3D-kernel. The algorithm uses a Markov Chain Monte Carlo (MCMC) approach with a nontraditional proposal distribution in order to efficiently probe the parameter space. We demonstrate the robustness of the algorithm using 1728 mock galaxies and galaxies generated from hydrodynamical simulations in various seeing conditions from 0.6 to 1.2. We find that the algorithm can recover the morphological parameters (inclination, position angle) to within 10% and the kinematic parameters (maximum rotation velocity) to within 20%, irrespectively of the PSF in seeing (up to 1.2) provided that the maximum signal-to-noise ratio (SNR) is greater than $sim3$ pixel$^{-1}$ and that the ratio of the galaxy half-light radius to seeing radius is greater than about 1.5. One can use such an algorithm to constrain simultaneously the kinematics and morphological parameters of (nonmerging) galaxies observed in nonoptimal seeing conditions. The algorithm can also be used on adaptive-optics (AO) data or on high-quality, high-SNR data to look for nonaxisymmetric structures in the residuals.
The Adaptive Optics Facility (AOF) project envisages transforming one of the VLT units into an adaptive telescope and providing its ESO (European Southern Observatory) second generation instruments with turbulence corrected wavefronts. For MUSE and HAWK-I this correction will be achieved through the GALACSI and GRAAL AO modules working in conjunction with a 1170 actuators Deformable Secondary Mirror (DSM) and the new Laser Guide Star Facility (4LGSF). Multiple wavefront sensors will enable GLAO and LTAO capabilities, whose performance can greatly benefit from a knowledge about the stratification of the turbulence in the atmosphere. This work, totally based on end-to-end simulations, describes the validation tests conducted on a Cn2 profiler adapted for the AOF specifications. Because an absolute profile calibration is strongly dependent on a reliable knowledge of turbulence parameters r0 and L0, the tests presented here refer only to normalized output profiles. Uncertainties in the input parameters inherent to the code are tested as well as the profiler response to different turbulence distributions. It adopts a correction for the unseen turbulence, critical for the GRAAL mode, and highlights the effects of masking out parts of the corrected wavefront on the results. Simulations of data with typical turbulence profiles from Paranal were input to the profiler, showing that it is possible to identify reliably the input features for all the AOF modes.
The Hot Universe Baryon Surveyor (HUBS) mission is proposed to study missing baryons in the universe. Unlike dark matter, baryonic matter is made of elements in the periodic table, and can be directly observed through the electromagnetic signals that it produces. Stars contain only a tiny fraction of the baryonic matter known to be present in the universe. Additional baryons are found to be in diffuse (gaseous) form, in or between galaxies, but a significant fraction has not yet been seen. The latter (missing baryons) are thought to be hiding in low-density warm-hot ionized medium (WHIM), based on results from theoretical studies and recent observations, and be distributed in the vicinity of galaxies (i.e., circum-galactic medium) and between galaxies (i.e., intergalactic medium). Such gas would radiate mainly in the soft X-ray band and the emission would be very weak, due to its very low density. HUBS is optimized to detect the X-ray emission from the hot baryons in the circum-galactic medium, and thus fill a void in observational astronomy. The goal is not only to detect the missing baryons, but to characterize their physical and chemical properties, as well as to measure their spatial distribution. The results would establish the boundary conditions for understanding galaxy evolution. Though highly challenging, detecting missing baryons in the intergalactic medium could be attempted, perhaps in the outskirts of galaxy clusters, and could shed significant light on the large-scale structures of the universe. The current design of HUBS will be presented, along with the status of technology development.
Dome A, Antarctica has been thought to be one of the best astronomical sites on the earth since decades ago. From it was first visited by astronomers in 2008, dozens of facilities for astronomical observation and site testing were deployed. Due to its special geographical location, the data and message exchange between Dome A and the domestic control center could only depend on Iridium. Because the link bandwidth of Iridium is extremely limited, meanwhile the network traffic cost is quite expensive and the network is rather unstable, the commonly used data transfer tools, such as rsync and scp, are not suitable in this case. In this paper, we design and implement a data transfer tool called NBFTP (narrow bandwidth file transfer protocol) for the astronomical observation of Dome A. NBFTP uses a uniform interface to arrange all types of data and matches specific transmission schemes for different data types according to rules. Break-point resuming and extensibility functions are also implemented. Our experimental results show that NBFTP consumes 60% less network traffic than rsync when detecting the data pending to be transferred. And when transferring small files of 1KB, the network traffic consumption of NBFTP is 40% less than rsync. However, as the file size increases, the network traffic consumption of NBFTP tends to approach rsync, but it is still smaller than rsync.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
