Studied the distribution coefficient of elemental copper and lead contaminants in the aqueous phase using a Bi-phase system: solid phase (the sands of Palmyra) and liquid phase (water containing the former two elements), where they were sampling sand samples from different regions in Palmyra to investigate for possible use as an adsorbent for elemental copper the lead from contaminated water, and after adjustment for certain transactions from time mixing phases, granular size, concentration of hydrogen ions, the concentration of the contaminated ingredient, the concentration of rival element (calcium) in addition to the ratio v / m in order to get the best rate for removal of these elements. The removal rate of copper componentamounted to 99.9% using four sites samples of sand a Palmyra, (al qareaten - the third leg to pump crude oil T3 - Alhl field - the valley between Mount aldahek and Sokhna) For lead removal ratio stood at 76.35% for the qareaten and 87.75% of the station the third to pump crude oil and 95 0.0% of the field Alhl and 96.25% of the valley between Mount aldahek and Sukhna. The application of the conditions that we have obtained in the laboratory to industrial water samples from the water income for the unity of treatment in Banias refinery and Water Company Drinaj of the Syrian Company for Oil Transport and the ratio of the removal of lead in the four samples ranging from ( 97.79 - 100)% for water Banias Refinery Company ranged between (83.89 - 88.08)% for water Syrian Company for Oil Transport, while the percentage of removal of the copper in the four samples ranging from (96.52 - 99.37)% for water Banias refinery Company and ranged ratio remove copper from the Syrian Company for Oil Transport water between (82.66 - 96.28)% in four samples.