Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userFactors correlating to enhanced surface diffusion in metallic glasses
221
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The enhancement of surface diffusion (DS) over the bulk (DV) in metallic glasses (MGs) is well documented and likely to strongly influence the properties of glasses grown by vapor deposition. Here, we use classical molecular dynamics simulations to identify different factors influencing the enhancement of surface diffusion in MGs. MGs have a simple atomic structure and belong to the category of moderately fragile glasses that undergo pronounced slowdown of bulk dynamics with cooling close to the glass transition temperature (Tg). We observe that DS exhibits a much more moderate slowdown compared to DV when approaching Tg, and DS/DV at Tg varies by two orders of magnitude among the MGs investigated. We demonstrate that both the surface energy and the fraction of missing bonds for surface atoms show good correlation to DS/DV, implying that the loss of nearest neighbors at the surface directly translates into higher mobility, unlike the behavior of network- and hydrogen-bonded organic glasses. Fragility, a measure of the slowdown of bulk dynamics close to Tg, also correlates to DS/DV, with more fragile systems having larger surface enhancement of mobility. The deviations observed in the fragility and DS over DV relationship are shown to be correlated to the extent of segregation or depletion of the mobile element at the surface. Finally, we explore the relationship between the diffusion pre-exponential factor (D0) and activation energy (Q) and compare to a ln(D0)-Q correlation previously established for bulk glasses, demonstrating similar correlations from MD as in the experiments and that the surface and bulk have very similar ln(D0)-Q correlations.
rate research
Read More
The bulk and surface dynamics of Cu50Zr50 metallic glass were studied using classical molecular dynamics (MD) simulations. As the alloy undergoes cooling, it passes through liquid, supercooled, and glassy states. While bulk dynamics showed a marked slowing down prior to glass formation, with increasing activation energy, the slowdown in surface dynamics was relatively subtle. The surface exhibited a lower glass transition temperature than the bulk, and the dynamics preceding the transition were accurately described by a temperature-independent activation energy. Surface dynamics were much faster than bulk at a given temperature in the supercooled state, but surface and bulk dynamics were found to be very similar when compared at their respective glass transition temperatures. The manifestation of dynamical heterogeneity, as characterized by the non-Gaussian parameter and breakdown of the Stokes-Einstein equation, was also similar between bulk and surface for temperatures scaled by their respective glass transition temperatures. Individual atom motion was dominated by a cage and jump mechanism in the glassy state for both the bulk and surface. We utilize this cage and jump mechanisms to separate the activation energy for diffusion into two parts: (i) cage-breaking barrier (Q1), associated with the rearrangement of neighboring atoms to free up space and (ii) the subsequent jump barrier (Q2). It was observed that Q1 dominates Q2 for both bulk and surface diffusion, and the difference in activation energies for bulk and surface diffusion mainly arose from the differences in cage-breaking barrier Q1.
Crystallization from an amorphous atomic structure is usually seen as a spontaneous process in pursuit of a lower energy state, but for alloy systems it is often hard to elucidate because of the intrinsic structural and compositional complexity. Here, by means of electron beam irradiation, we found surface-limited, and thus size-dependent crystallization in a system of monoatomic Pd metallic glass, which is ascribed to the structural differences between the surface and the interior. The equilibrium thickness of the surface crystallization is controllable, presenting a promising approach to fabricate novel nanostructures. The investigation is believed to provide a general understanding of solid amorphous-to-crystalline phase transition from the nanoscale to the bulk size.
Universality in materials deformation is of intense interest: universal scaling relations if exist would bridge the gap from microscopic deformation to macroscopic response in a single material-independent fashion. While recent agreement of the force statistics of deformed nanopillars, bulk metallic glasses, and granular materials with mean-field predictions supports the idea of universal scaling relations, here for the first time we demonstrate that the universality extends beyond the statistics, and applies to the slip dynamics as well. By rigorous comparison of two very different systems, bulk metallic glasses and granular materials in terms of both the statistics and dynamics of force fluctuations, we clearly establish a material-independent universal regime of deformation. We experimentally verify the predicted universal scaling function for the time evolution of individual avalanches, and show that both the slip statistics and dynamics are universal, i.e. independent of the scale and details of the material structure and interactions. These results are important for transferring experimental results across scales and material structures in a single theory of deformation.
Metallic glasses are excellent candidates for biomedical implant applications due to their inherent strength and corrosion resistance. Use of metallic glasses in structural applications is limited, however, because bulk dimensions are challenging to achieve. Glass-forming ability (GFA) varies strongly with alloy composition and becomes more difficult to predict as the number of chemical species in a system increases. Here we present a theoretical model - implemented in the AFLOW framework - for predicting GFA based on the competition between crystalline phases, and apply it to biologically relevant binary and ternary systems. Elastic properties are estimated based on the rule of mixtures for alloy systems that are predicted to be bulk glass-formers. Focusing on Ca- and Mg-based systems for use in biodegradable orthopedic support applications, we suggest alloys in the AgCaMg and AgMgZn families for further study; and alloys based on the compositions: Ag$_{0.33}$Mg$_{0.67}$, Cu$_{0.5}$Mg$_{0.5}$, Cu$_{0.37}$Mg$_{0.63}$ and Cu$_{0.25}$Mg$_{0.5}$Zn$_{0.25}$.
We perform molecular dynamics simulations to compress binary hard spheres into jammed packings as a function of the compression rate $R$, size ratio $alpha$, and number fraction $x_S$ of small particles to determine the connection between the glass-forming ability (GFA) and packing efficiency in bulk metallic glasses (BMGs). We define the GFA by measuring the critical compression rate $R_c$, below which jammed hard-sphere packings begin to form random crystal structures with defects. We find that for systems with $alpha gtrsim 0.8$ that do not de-mix, $R_c$ decreases strongly with $Delta phi_J$, as $R_c sim exp(-1/Delta phi_J^2)$, where $Delta phi_J$ is the difference between the average packing fraction of the amorphous packings and random crystal structures at $R_c$. Systems with $alpha lesssim 0.8$ partially de-mix, which promotes crystallization, but we still find a strong correlation between $R_c$ and $Delta phi_J$. We show that known metal-metal BMGs occur in the regions of the $alpha$ and $x_S$ parameter space with the lowest values of $R_c$ for binary hard spheres. Our results emphasize that maximizing GFA in binary systems involves two competing effects: minimizing $alpha$ to increase packing efficiency, while maximizing $alpha$ to prevent de-mixing.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
