Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userStellarator coil design using cubic splines for improved access on the outboard side
169
0
0.0
(
0
)
Authors
N. Lonigro
Ask ChatGPT about the research
No Arabic abstract
In recent years many efforts have been undertaken to simplify coil designs for stellarators due to the difficulties in fabricating non-planar coils. The FOCUS code removes the need for a winding surface and represents the coils as arbitrary curves in 3D. In the following work, the implementation of a spline representation for the coils in FOCUS is described, along with the implementation of a new engineering constraint to design coils with a straighter outer section. The new capabilities of the code are shown as an example on HSX, NCSX, and a prototype quasi-axisymmetric reactor-sized stellarator. The flexibility granted by splines along with the new constraint will allow for stellarator coil designs with improved accessibility and simplified maintenance
rate research
Read More
We present a method for stellarator coil design via gradient-based optimization of the coil-winding surface. The REGCOIL (Landreman 2017 Nucl. Fusion 57 046003) approach is used to obtain the coil shapes on the winding surface using a continuous current potential. We apply the adjoint method to calculate derivatives of the objective function, allowing for efficient computation of analytic gradients while eliminating the numerical noise of approximate derivatives. We are able to improve engineering properties of the coils by targeting the root-mean-squared current density in the objective function. We obtain winding surfaces for W7-X and HSX which simultaneously decrease the normal magnetic field on the plasma surface and increase the surface-averaged distance between the coils and the plasma in comparison with the actual winding surfaces. The coils computed on the optimized surfaces feature a smaller toroidal extent and curvature and increased inter-coil spacing. A technique for visualization of the sensitivity of figures of merit to normal surface displacement of the winding surface is presented, with potential applications for understanding engineering tolerances.
Coil complexity is a critical consideration in stellarator design. The traditional two-step optimization approach, in which the plasma boundary is optimized for physics properties and the coils are subsequently optimized to be consistent with this boundary, can result in plasma shapes which cannot be produced with sufficiently simple coils. To address this challenge, we propose a method to incorporate considerations of coil complexity in the optimization of the plasma boundary. Coil complexity metrics are computed from the current potential solution obtained with the REGCOIL code (Landreman 2017 Nucl. Fusion 57 046003). We compute the local sensitivity of these metrics with respect to perturbations of the plasma boundary using the shape gradient (Landreman & Paul 2018 Nucl. Fusion 58 076023). We extend REGCOIL to compute derivatives of these metrics with respect to parameters describing the plasma boundary. In keeping with previous research on winding surface optimization (Paul et al. 2018 Nucl. Fusion 58 076015), the shape derivatives are computed with a discrete adjoint method. In contrast with the previous work, derivatives are computed with respect to the plasma rather than the winding surface parameters. To further reduce the required resolution, we present a more efficient representation of the plasma surface using a single Fourier series to describe the radial distance from a coordinate axis and a spectrally condensed poloidal angle. This representation is advantageous over the standard cylindrical representation used in the VMEC code (Hirshman & Whitson 1983 The Physics of Fluids 26 3553-3568), as it provides a uniquely defined poloidal angle, eliminating a null space in the optimization of the plasma surface. The resulting shape gradient highlights features of the plasma boundary consistent with simple coils and can be used to couple coil and fixed-boundary optimization.
This paper presents the non-linear generalization of a previous work on matrix differential models. It focusses on the construction of approximate solutions of first-order matrix differential equations Y(x)=f(x,Y(x)) using matrix-cubic splines. An estimation of the approximation error, an algorithm for its implementation and illustrative examples for Sylvester and Riccati matrix differential equations are given.
Overdense plasmas have been attained with 2.45 GHz microwave heating in the low-field, low-aspect-ratio CNT stellarator. Densities higher than four times the ordinary (O) mode cutoff density were measured with 8 kW of power injected in the O-mode and, alternatively, with 6.5 kW in the extraordinary (X) mode. The temperature profiles peak at the plasma edge. This was ascribed to collisional damping of the X-mode at the upper hybrid resonant layer. The X-mode reaches that location by tunneling, mode-
In the present work we report recent radial electric field measurements carried out with the Doppler reflectometry system in the TJ-II stellarator. The study focuses on the fact that, under some conditions, the radial electric field measured at different points over the same flux surface shows significantly different values. A numerical analysis is carried out considering the contribution arising from the radial dependence of $Phi_1$ as a possible correction term to the total radial electric field. Here $Phi_1$ is the neoclassical electrostatic potential variation over the surface. The comparison shows good agreement in some aspects, like the conditions under which this correction is large (electron-root conditions) or negligible (ion-root conditions). But it disagrees in others like the sign of the correction. The results are discussed together with the underlying reasons of this partial disagreement. In addition, motivated by the recent installation of the dual Doppler reflectometry system in Wendelstein 7-X (W7-X), $Phi_1$ estimations for W7-X are revisited considering Core-Electron-Root-Plasma (CERC) plasmas from its first experimental campaign. The simulations show larger values of $Phi_1$ under electron-root conditions than under ion root ones. The contribution from the kinetic electron response is shown to become important at some radii. All this results in a potential variation size noticeably larger than estimated in our previous work in W7-X cite{Regana_nf_57_056004_2017} for other plasma parameters and another configuration.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
