Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userUsing Discrete Harmonic Expansions and Equilibrium Conditions to Estimate Intragrain Stress Distributions in Polycrystals from Grain-Averaged Data
55
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The application of harmonic expansions to estimate intra-grain stress distributions from grain-averaged stress data is presented that extends the capabilities of the open source code, MechMonics. The method is based on using an optimization algorithm to determine the harmonic expansion weights that reduce the violation of equilibrium while maintaining prescribed grain-averages. The method is demonstrated using synthetic data generated for uniaxial extension of a virtual polycrystal with the mechMet code.
rate research
Read More
A methodology for computing expansion basis functions using discrete harmonic modes is presented. The discrete harmonic modes are determined grain-by-grain for virtual polycrystals for which finite element meshes are available. The expansion weights associated with representing field variables over grain domains are determined by exploiting the orthogonality of the harmonic modes. The methodology is demonstrated with the representation of the axial stress distributions during tensile loading of a polycrystalline sample. An open source code, MechMonics, is available to researchers wishing to use the methodology to analyze data.
White beam x-ray Laue microdiffraction allows fast mapping of crystal orientation and strain fields in polycrystals, with a submicron spatial resolution in two dimensions. In the well crystallized parts of the grains, the analysis of Laue spot positions provides the local deviatoric strain tensor. The hydrostatic part of the strain tensor may also be obtained, at the cost of a longer measuring time, by measuring the energy profiles of the Laue spots using a variable-energy monochromatic beam. A new Rainbow method is presented, which allows measuring the energy profiles of the Laue spots while remaining in the white-beam mode. It offers mostly the same information as the latter monochromatic method, but with two advantages : i) the simultaneous measurement of the energy profiles and the Laue pattern; ii) the rapid access to energy profiles of a larger number of spots, for equivalent scans on the angle of the optical element. The method proceeds in the opposite way compared to a monochromator-based method, by simultaneously removing several sharp energy bands from the incident beam, instead of selecting a single one. It uses a diamond single crystal placed upstream of the sample. Each Laue diffraction by diamond lattice planes attenuates the corresponding energy in the incident spectrum. By rotating the crystal, the filtered-out energies can be varied in a controlled manner, allowing one to determine the extinction energies of several Laue spots of the studied sample. The energies filtered-out by the diamond crystal are obtained by measuring its Laue pattern with an other 2D detector, at each rotation step. This article demonstrates the feasibility of the method, and its validation through the measurement of a known lattice parameter.
Germanosilicides, especially those formed on compressive substrates, are less stable than silicides against agglomeration. By studying the solid-state reaction of Ni thin film on strained Si0.8Ge0.2(001), we show that nickel germanosilicide is different from nickel silicide and nickel germanide in several respects: the grains are smaller and faceted, the groove angle is sharper, and dealloying takes place. The germanium out-diffusion creates a stress in the film which favors grooving and agglomeration.
In the paper we predict a distinctive change of magnetic properties and considerable increase of the Curie temperature caused by the strain fields of grain boundaries in ferromagnetic films. It is shown that a sheet of spontaneous magnetization may arise along a grain boundary at temperatures greater than the bulk Curie temperature. The temperature dependence and space distribution of magnetization in a ferromagnetic film with grain boundaries are calculated. We found that $45^circ$ grain boundaries can produce long-range strain fields that results in the width of the magnetic sheet along the boundary of the order of $ 0.5 div 1 mu m$ at temperatures grater than the bulk Curie temperature by about $10^2$ K.
In order to predict InterGranular Stress Corrosion Cracking (IGSCC) of post-irradiated austenitic stainless steel in Light Water Reactor (LWR) environment, reliable predictions of intergranular stresses are required. Finite elements simulations have been performed on realistic polycrystalline aggregate with a recently proposed physically-based crystal plasticity constitutive equations validated for neutron-irradiated austenitic stainless steel. Intergranular normal stress probability density functions are found with respect to plastic strain and irradiation level, for uniaxial loading conditions. In addition, plastic slip activity jumps at grain boundaries are also presented. Intergranular normal stress distributions describe, from a statistical point of view, the potential increase of intergranular stress with respect to the macroscopic stress due to grain-grain interactions. The distributions are shown to be well described by a master curve once rescaled by the macroscopic stress, in the range of irradiation level and strain considered in this study. The upper tail of this master curve is shown to be insensitive to free surface effect, which is relevant for IGSCC
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
