Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userHigh tensile strength and thermal conductivity in BeO monolayer: A first-principles study
105
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
In a latest experimental advance, graphene-like and insulating BeO monolayer was successfully grown over silver surface by molecular beam epitaxy (ACS Nano 15(2021), 2497). Inspired by this accomplishment, in this work we conduct first-principles based simulations to explore the electronic, mechanical properties and thermal conductivity of graphene-like BeO, MgO and CaO monolayers. The considered nanosheets are found to show desirable thermal and dynamical stability. BeO monolayer is found to show remarkably high elastic modulus and tensile strength of 408 and 53.3 GPa, respectively. The electronic band gap of BeO, MgO and CaO monolayers are predicted to be 6.72, 4.79, and 3.80 eV, respectively, using the HSE06 functional. On the basis of iterative solutions of the Boltzmann transport equation, the room temperature lattice thermal conductivity of BeO, MgO and CaO monolayers are predicted to be 385, 64 and 15 W/mK, respectively. Our results reveal substantial decline in the electronic band gap, mechanical strength and thermal conductivity by increasing the weight of metal atoms. This work highlights outstandingly high thermal conductivity, carrier mobility and mechanical strength of insulating BeO nanosheets and suggest them as promising candidates to design strong and insulating components with high thermal conductivities.
rate research
Read More
Experimental realization of single-layer MoSi2N4 is among the latest groundbreaking advances in the field of two-dimensional (2D) materials. Inspired by this accomplishment, herein we conduct first-principles calculations to explore the stability of MC2N4 (M= Cr, Mo, W, V, Nb, Ta, Ti, Zr, Hf) monolayers. Acquired results confirm the desirable thermal, dynamical and mechanical stability of MC2N4 (M= Cr, Mo, W, V) nanosheets. Interestingly, CrC2N4, MoC2N4 and WC2N4 monolayers are found to be semiconductors with band gaps of 2.32, 2.76 and 2.86 eV, respectively, using the HSE06 functional, whereas VC2N4 lattice shows a metallic nature. The direct gap semiconducting nature of CrC2N4 monolayer results in excellent absorption of visible light. The elastic modulus and tensile strength of CrC2N4 nanosheet are predicted to be remarkably high, 676 and 54.8 GPa, respectively. On the basis of iterative solutions of the Boltzmann transport equation, the room temperature lattice thermal conductivity of CrC2N4 monolayer is predicted to be 350 W/mK, among the highest in 2D semiconductors. CrC2N4 and WC2N4 lattices are also found to exhibit outstandingly high piezoelectric coefficients. This study introduces CrC2N4 nanosheet as a novel 2D semiconductor with outstandingly high mechanical strength, thermal conductivity, carrier mobility and piezoelectric coefficient.
An increasing number of two-dimensional (2D) materials have already been achieved experimentally or predicted theoretically, which have potential applications in nano- and opto-electronics. Various applications for electronic devices are closely related to their thermal transport properties. In this work, the strain dependence of phonon transport in monolayer SiC with a perfect planar hexagonal honeycomb structure is investigated by solving the linearized phonon Boltzmann equation. It is found that room-temperature lattice thermal conductivity ($kappa_L$) of monolayer SiC is two orders of magnitude lower than that of graphene. The low $kappa_L$ is due to small group velocities and short phonon lifetimes, which can also be explained by polarized covalent bond due to large charge transfer from Si to C atoms. In considered strain range, it is proved that the SiC monolayer is mechanically and dynamically stable. With increased tensile strain, the $kappa_L$ of SiC monolayer shows an unusual nonmonotonic up-and-down behavior, which is due to the competition between the change of phonon group velocities and phonon lifetimes of low frequency phonon modes. At low strains ($<$8%), the phonon lifetimes enhancement induces the increased $kappa_L$, while at high strains ($>$8%) the reduction of group velocities as well as the decrease of the phonon lifetimes are the major mechanism responsible for decreased $kappa_L$. Our works further enrich studies on phonon transports of 2D materials with a perfect planar hexagonal honeycomb structure, and motivate farther experimental studies.
The electronic and thermal transport properties have been systematically investigated in monolayer C$_4$N$_3$H with first-principles calculations. The intrinsic thermal conductivity of monolayer C$_4$N$_3$H was calculated coupling with phonons Boltzmann transport equation. For monolayer C$_4$N$_3$H, the thermal conductivity (k{appa}) (175.74 and 157.90 W m-1K-1 with a and b-plane, respectively) is significantly lower than that of graphene (3500 Wm$^{-1}$K$^{-1}$) and C3N(380 Wm$^{-1}$K$^{-1}$). Moreover, it is more than the second time higher than C$_2$N (82.88 Wm$^{-1}$K$^{-1}$) at 300 K. Furthermore, the group velocities, relax time, anharmonicity, as well as the contribution from different phonon branches, were thoroughly discussed in detail. A comparison of the thermal transport characters among 2D structure for monolayer C$_4$N$_3$H, graphene, C$_2$N and C$_3$N has been discussed. This work highlights the essence of phonon transport in new monolayer material.
Monolayer WTe2 attracts rapidly growing interests for its large-gap quantum spin Hall effect,which enables promising apllications in flexible logic devices. Due to one-dimensional W-W chains,1T-WTe2 exhibits unique anisotropic structure and promising properties, which can be modified by simply applying strains. Based on the first-principles simulations, we show that phonon branch undergoes soft down to negative frequency at special q points under different critical strains, i.e., epsilon_a = 11.55 percent along a-axis (with W-W chains) direction, epsilon_b = 7.0 percent along b-axis direction and epsilon_ab = 8.44 percent along biaxial direction. Before each critical strain, the Raman-shift of A1_g, A3_g, and A4_g modes, corresponding to the main peaks in Raman spectra of 1T-WTe2 , shows anisotropic response to uniaxial strain but most sensitive to biaxial strain. Interestingly, we find that the frequency shift of A3_g mode show parabolic characters of strained 1T-WTe2, then we split it into two parts and it shows a Raman-shift transition at about 5 percent strains. While for the A1_g and A4_g modes,the frequencies change linearly. Through careful structure and vibration analysis, we try to explain these Raman irregularity in strained 1T-WTe2.
In this work, the electronic and optical properties of a Nitrogen (N) or a Boron (B) doped BeO monolayer are investigated in the framework of density functional theory. It is known that the band gap of a BeO monolayer is large leading to poor material for optoelectronic devices in a wide range of energy. Using substitutional N or B dopant atoms, we find that the band gap can be tuned and the optical properties can be improved. In the N(B)-doped BeO monolayer, the Fermi energy slightly crosses the valence(conduction) band forming a degenerate semiconductor structure. The N or B atoms thus generate new states around the Fermi energy increasing the optical conductivity in the visible light region. Furthermore, the influences of dopant atoms on the electronic structure, the stability, the dispersion energy, the density of states, and optical properties such as the plasmon frequency, the excitation spectra, the dielectric functions, the static dielectric constant, and the electron energy loss function are discussed for different directions of polarizations for the incoming electric field.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
