Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userStable High Power deep-UV Enhancement Cavity in Ultra High Vacuum with Fluoride Coatings
56
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We demonstrate the superior performance of fluoride coated versus oxide coated mirrors in long term vacuum operation of a high power deep-ultraviolet enhancement cavity. In high vacuum ($10^{-8}$ mbar), the fluoride optics can maintain up to a record-high 10 w of stable intracavity power on one hour time scales, whereas for the oxide optics, we observe rapid degradation at lower intracavity powers with a rate that increases with power. After observing degradation in high vacuum, we can recover the fluoride and oxide optics with oxygen; however, this recovery process becomes ineffective after several applications. For fluoride coatings, we see that initial UV conditioning in an oxygen environment helps to improve the performances of the optics. In oxygen-rich environments from $sim 10^{-4}$ mbar to 1 mbar, the fluoride optics can stably maintain up to 20 W of intracavity power on several-hour time scales whereas for the oxide optics there is immediate degradation with a rate that increases with decreasing oxygen pressure.
rate research
Read More
We report dispersive coupling of an optically trapped silica nanoparticle ($143~$nm diameter) to the field of a driven Fabry-Perot cavity in high vacuum ($4.3times 10^{-6}~$mbar). We demonstrate nanometer-level control in positioning the particle with respect to the intensity distribution of the cavity field, which allows access to linear, quadratic and tertiary optomechanical interactions in the resolved sideband regime. We determine all relevant coupling rates of the system, i.e. mechanical and optical losses as well as optomechanical interaction, and obtain a quantum cooperativity of $C_Q = 0.01$. Based on the presented performance the regime of strong cooperativity ($C_Q > 1$) is clearly within reach by further decreasing the mode volume of the cavity.
We demonstrate a femtosecond enhancement cavity with a crossed-beam geometry for efficient generation and extraction of extreme-ultraviolet (XUV) frequency combs at a 154 MHz repetition rate. We achieve a record-high out-coupled power of 600 {mu}W, directly usable for spectroscopy, at a wavelength of 97 nm. This corresponds to a >60% out-coupling efficiency. The XUV power scaling and generation efficiency are similar to that achieved with a single Gaussian-mode fundamental beam inside a collinear enhancement cavity. The noncollinear geometry also opens the door for the generation of isolated attosecond pulses at >100 MHz repetition rate.
When exposed to intense electromagnetic fields, the quantum vacuum is expected to exhibit properties of a polarisable medium akin to a weakly nonlinear dielectric material. Various schemes have been proposed to measure such vacuum polarisation effects using a combination of high power lasers. Motivated by several planned experiments, we provide an overview of experimental signatures that have been suggested to confirm this prediction of quantum electrodynamics of real photon-photon scattering.
We study the vacuum-induced degradation of high-finesse optical cavities with mirror coatings composed of SiO$_2$-Ta$_{2}$O$_{5}$ dielectric stacks, and present methods to protect these coatings and to recover their initial quality factor. For separate coatings with reflectivities centered at 370 nm and 422 nm, a vacuum-induced continuous increase in optical loss occurs if the surface-layer coating is made of Ta$_{2}$O$_{5}$, while it does not occur if it is made of SiO$_2$. The incurred optical loss can be reversed by filling the vacuum chamber with oxygen at atmospheric pressure, and the recovery rate can be strongly accelerated by continuous laser illumination at 422 nm. Both the degradation and the recovery processes depend strongly on temperature. We find that a 1 nm-thick layer of SiO$_2$ passivating the Ta$_{2}$O$_{5}$ surface layer is sufficient to reduce the degradation rate by more than a factor of 10, strongly supporting surface oxygen depletion as the primary degradation mechanism.
We demonstrate injection-locking of 120mW laser diodes operating at 397nm. We achieve stable operation with injection powers of ~100uW and a slave laser output power of up to 110mW. We investigate the spectral purity of the slave laser light via photon scattering experiments on a single trapped Ca40 ion. We show that it is possible to achieve a scattering rate indistinguishable from that of monochromatic light by filtering the laser light with a diffraction grating to remove amplified spontaneous emission.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
