Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userResolution-enhanced OCT and expanded framework of information capacity and resolution in coherent imaging
59
0
0.0
(
0
)
Authors
Nichaluk Leartprapun
Ask ChatGPT about the research
No Arabic abstract
Spatial resolution in optical microscopy has traditionally been treated as a fixed parameter of the optical system. Here, we present an approach to enhance transverse resolution in beam-scanned optical coherence tomography (OCT) beyond its aberration-free resolution limit, without any modification to the optical system. Based on the theorem of invariance of information capacity, resolution-enhanced (RE)-OCT navigates the exchange of information between resolution and signal-to-noise ratio (SNR) by exploiting efficient noise suppression via coherent averaging and a simple computational bandwidth expansion procedure. We demonstrate a resolution enhancement of 1.5 times relative to the aberration-free limit while maintaining comparable SNR in silicone phantom. We show that RE-OCT can significantly enhance the visualization of fine microstructural features in collagen gel and ex vivo mouse brain. Beyond RE-OCT, our analysis in the spatial-frequency domain leads to an expanded framework of information capacity and resolution in coherent imaging that contributes new implications to the theory of coherent imaging. RE-OCT can be readily implemented on most OCT systems worldwide, immediately unlocking information that is beyond their current imaging capabilities, and so has the potential for widespread impact in the numerous areas in which OCT is utilized, including the basic sciences and translational medicine.
rate research
Read More
Raman microscopy is a valuable tool for detecting physical and chemical properties of a sample material. When probing nanomaterials or nanocomposites the spatial resolution of Raman microscopy is not always adequate as it is limited by the optical diffraction limit. Numerical post-processing with super-resolution algorithms provides a means to enhance resolution and can be straightforwardly applied. The aim of this work is to present interior-point least squares (IPLS) as a powerful tool for super-resolution in Raman imaging through constrained optimisation. IPLSs potential for super-resolution is illustrated on numerically generated test images. Its resolving power is demonstrated on Raman spectroscopic data of a polymer nanowire sample. Comparison to AFM data of the same sample substantiates that the presented method is a promising technique for analysing nanomaterial samples.
Super-resolution imaging with advanced optical systems has been revolutionizing technical analysis in various fields from biological to physical sciences. However, many objects are hidden by strongly scattering media such as rough wall corners or biological tissues that scramble light paths, create speckle patterns and hinder objects visualization, let alone super-resolution imaging. Here, we realize a method to do non-invasive super-resolution imaging through scattering media based on stochastic optical scattering localization imaging (SOSLI) technique. Simply by capturing multiple speckle patterns of photo-switchable emitters in our demonstration, the stochastic approach utilizes the speckle correlation properties of scattering media to retrieve an image with more than five-fold resolution enhancement compared to the diffraction limit, while posing no fundamental limit in achieving higher spatial resolution. More importantly, we demonstrate our SOSLI to do non-invasive super-resolution imaging through not only optical diffusers, i.e. static scattering media, but also biological tissues, i.e. dynamic scattering media with decorrelation of up to 80%. Our approach paves the way to non-invasively visualize various samples behind scattering media at unprecedented levels of detail.
Fourier ptychographic microscopy is a computational imaging technique that provides quantitative phase information and high resolution over a large field-of-view. Although the technique presents numerous advantages over conventional microscopy, model mismatch due to unknown optical aberrations can significantly limit reconstruction quality. Many attempts to address this issue rely on embedding pupil recovery into the reconstruction algorithm. In this paper we demonstrate the limitations of a purely algorithmic approach and evaluate the merits of implementing a simple, dedicated calibration procedure. In simulations, we find that for a target sample reconstruction error, we can image without any aberration corrections up to a maximum aberration magnitude of $lambda$/40. When we use algorithmic self-calibration, we can increase the aberration magnitude up to $lambda$/10, and with our in situ speckle calibration technique, this working range is extended further to a maximum aberration magnitude of $lambda$/3. Hence, one can trade-off complexity for accuracy by using a separate calibration process, which is particularly useful for larger aberrations.
A simple model for image formation in linear shift-invariant systems is considered, in which both the detected signal and the noise variance are varying slowly compared to the point-spread function of the system. It is shown that within the constraints of this model, the square of the signal-to-noise ratio is always proportional to the volume of the spatial resolution unit. In the case of Poisson statistics, the ratio of these two quantities divided by the incident density of the imaging particles (e.g. photons) represents a dimensionless invariant of the imaging system, which was previously termed the intrinsic imaging quality. The relationship of this invariant to the notion of information capacity of communication and imaging systems, which was previously considered by Shannon, Gabor and others, is investigated. The results are then applied to a simple generic model of quantitative imaging of weakly scattering objects, leading to an estimate of the upper limit for the amount of information about the sample that can be obtained in such experiments. It is shown that this limit depends only on the total number of imaging particles incident on the sample, the average scattering coefficient, the size of the sample and the number of spatial resolution units.
This work presents a new super-resolution imaging approach by using subwavelength hole resonances. We employ a subwavelength structure in which an array of tiny holes are etched in a metallic slab with the neighboring distance $ell$ that is smaller than half of the wavelength. By tuning the incident wave at resonant frequencies, the subwavelength structure generates strong illumination patterns that are able to probe both low and high spatial frequency components of the imaging sample sitting above the structure. The image of the sample is obtained by performing stable numerical reconstruction from the far-field measurement of the diffracted wave. It is demonstrated that a resolution of $ell/2$ can be obtained for reconstructed images, thus one can achieve super-resolution by arranging multiple holes within one wavelength. The proposed approach may find applications in wave-based imaging such as electromagnetic and ultrasound imaging. It attains two advantages that are important for practical realization. It avoids the difficulty to control the distance the between the probe and the sample surface with high precision. In addition, the numerical reconstructed images are very stable against noise by only using the low frequency band of the far-field data in the numerical reconstruction.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
