Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userA reversed Kerr traveling wave parametric amplifier
85
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Traveling wave parametric amplification in a nonlinear medium provides broadband quantum-noise limited gain and is a remarkable resource for the detection of electromagnetic radiation. This nonlinearity is at the same time the key to the amplification phenomenon but also the cause of a fundamental limitation: poor phase matching between the signal and the pump. Here we solve this issue with a new phase matching mechanism based on the sign reversal of the Kerr nonlinearity. We present a novel traveling wave parametric amplifier composed of a chain of superconducting nonlinear asymmetric inductive elements (SNAILs) which allows this sign reversal when biased with the proper magnetic flux. Compared to previous state of the art phase matching approaches, this reversed Kerr phase matching mechanism avoids the presence of gaps in transmission, reduces gain ripples, and allows in situ tunability of the amplification band over an unprecedented wide range. Besides such notable advancements in the amplification performance, with direct applications to superconducting quantum computing, the in-situ tunability of the nonlinearity in traveling wave structures, with no counterpart in optics to the best of our knowledge, opens exciting experimental possibilities in the general framework of microwave quantum optics and single-photon detection.
rate research
Read More
Josephson parametric amplifiers have become a critical tool in superconducting device physics due to their high gain and quantum-limited noise. Traveling wave parametric amplifiers (TWPAs) promise similar noise performance while allowing for significant increases in both bandwidth and dynamic range. We present a TWPA device based on an LC-ladder transmission line of Josephson junctions and parallel plate capacitors using low-loss amorphous silicon dielectric. Crucially, we have inserted $lambda/4$ resonators at regular intervals along the transmission line in order to maintain the phase matching condition between pump, signal, and idler and increase gain. We achieve an average gain of 12,dB across a 4,GHz span, along with an average saturation power of -92,dBm with noise approaching the quantum limit.
Degenerate parametric amplifiers (DPAs) exhibit the unique property of phase-sensitive gain and can be used to noiselessly amplify small signals or squeeze field fluctuations beneath the vacuum level. In the microwave domain, these amplifiers have been utilized to measure qubits in elementary quantum processors, search for dark matter, facilitate high-sensitivity spin resonance spectroscopy and have even been proposed as the building blocks for a measurement based quantum computer. Until now, microwave DPAs have almost exclusively been made from nonlinear Josephson junctions, which exhibit high-order nonlinearities that limit their dynamic range and squeezing potential. In this work we investigate a new microwave DPA that exploits a nonlinearity engineered from kinetic inductance. The device has a simple design and displays a dynamic range that is four orders of magnitude greater than state-of-the-art Josephson DPAs. We measure phase sensitive gains up to 50 dB and demonstrate a near-quantum-limited noise performance. Additionally, we show that the higher-order nonlinearities that limit other microwave DPAs are almost non-existent for this amplifier, which allows us to demonstrate its exceptional squeezing potential by measuring the deamplification of coherent states by as much as 26 dB.
Broadband quantum-limited amplifiers would advance applications in quantum information processing, metrology, and astronomy. However, conventional traveling-wave parametric amplifiers (TWPAs) support broadband amplification at the cost of increased added noise. In this work, we develop and apply a multi-mode, quantum input-output theory to quantitatively identify the sidebands as a primary noise mechanism in all conventional TWPAs. We then propose an adiabatic Floquet mode scheme that effectively eliminates the sideband-induced noise and subsequently overcomes the trade-off between quantum efficiency (QE) and bandwidth. We then show that a Floquet mode Josephson traveling-wave parametric amplifier implementation can simultaneously achieve $>20,$dB gain and a QE of $eta/eta_{mathrm{ideal}}> 99.9%$ of the quantum limit over more than an octave of bandwidth. Crucially, Floquet mode TWPAs also strongly suppress the nonlinear forward-backward wave coupling and are therefore genuinely directional. Floquet mode TWPAs can thus be directly integrated on-chip without isolators, making near-perfect measurement efficiency possible. The proposed Floquet scheme is also widely applicable to other platforms such as kinetic inductance traveling-wave amplifiers and optical parametric amplifiers.
We present a theoretical model and experimental characterization of a microwave kinetic inductance traveling-wave amplifier (KIT), whose noise performance, measured by a shot-noise tunnel junction (SNTJ), approaches the quantum limit. Biased with a dc current, the KIT operates in a three-wave mixing fashion, thereby reducing by several orders of magnitude the power of the microwave pump tone and associated parasitic heating compared to conventional four-wave mixing KIT devices. It consists of a 50 Ohms artificial transmission line whose dispersion allows for a controlled amplification bandwidth. We measure $16.5^{+1}_{-1.3}$ dB of gain across a 2 GHz bandwidth with an input 1 dB compression power of -63 dBm, in qualitative agreement with theory. Using a theoretical framework that accounts for the SNTJ-generated noise entering both the signal and idler ports of the KIT, we measure the system-added noise of an amplification chain that integrates the KIT as the first amplifier. This system-added noise, $3.1pm0.6$ quanta (equivalent to $0.66pm0.15$ K) between 3.5 and 5.5 GHz, is the one that a device replacing the SNTJ in that chain would see. This KIT is therefore suitable to read large arrays of microwave kinetic inductance detectors and promising for multiplexed superconducting qubit readout.
We study theoretically how loss impacts the amplification and squeezing performance of a generic quantum travelling wave parametric amplifier. Unlike previous studies, we analyze how having different levels of loss at signal and idler frequencies can dramatically alter properties compared to the case of frequency-independent loss. We find that loss asymmetries increase the amplifiers added noise in comparison to the symmetric loss case. More surprisingly, even small levels of loss asymmetry can completely destroy any quantum squeezing of symmetric collective output quadratures, while nonetheless leaving the output state strongly entangled.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
