Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userDeformation of upper mantle rocks with contrasting initial fabrics in axial extension
310
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
To explore the role of the olivine grain size and crystal preferred orientation (CPO) on the evolution of the microstructure and the mechanical behaviour of upper mantle rocks up to large strains, we performed axial extension experiments at 1200C, 300MPa confining pressure, and constant displacement rate on three natural peridotites: a fine-grained mylonitic harzburgite with a weak CPO and two coarse-grained well-equilibrated dunites with CPO of variable intensity. Initial flow stresses show a limited range of variation (115-165MPa), with the fine-grained sample showing the highest initial strength. However, the evolution of both mechanical behavior and microstructure differs between fine and coarse-grained peridotites. In the fine-grained harzburgite, necking resulted in decrease in the apparent differential stress. Focusing of strain and stress produced increase of the olivine recrystallized fraction and decrease of the recrystallized grain size in the neck. Analysis of the final stress and strain in the neck indicates softening due to evolution of the microstructure and CPO. In contrast, necking of the coarse-grained samples produced weak or no decrease in the apparent differential stress. This implies hardening, consistently with the increase in bulk intragranular misorientation and final stresses in the neck similar or higher than initial ones. Coarse-grained dunites deformed heterogeneously. Crystals well oriented to deform by dislocation glide became elongated, whereas those in hard orientations remained almost undeformed. In the neck, stress and strain concentration resulted in formation of kinks in hard crystals and dynamic recrystallization in soft crystals. We interpret the more effective strain-induced softening of the fine-grained peridotite as due to easier dynamic recrystallization, probably due to the higher proportion of grain boundaries acting as nucleation sites.
rate research
Read More
Earth/s lowermost mantle displays complex geological structures that likely result from heterogeneous thermal and electromagnetic interaction with the core. Geophysical models of the core-mantle boundary (CMB) region rely on the thermal and electrical conductivities of appropriate geomaterials which, however, have never been probed at representative pressure and temperature (P-T) conditions. Here we report on the opacity of single crystalline bridgmanite and ferropericlase, which is linked to both their radiative and electrical conductivity, measured in dynamically- and statically-heated diamond anvil cells as well as computed from first-principles at CMB conditions. Our results show that light absorption in the visible spectral range is enhanced upon heating in both minerals but the rate of change in opacity with temperature is a factor of six higher in ferropericlase. As a result, bridgmanite in the lowermost mantle is moderately transparent while ferropericlase is highly opaque. Our measurements suggest a very low (< 1 W/m/K) and largely temperature-independent radiative conductivity in the lowermost mantle, at odds with previous studies. This implies that the radiative mechanism has not contributed significantly to cooling the Earth/s core throughout the geologic time and points to a present-day CMB heat flow of 9-11 TW. Opaque ferropericlase is electrically conducting and mediates strong core-mantle electromagnetic coupling, explaining the intradecadal oscillations in the length of day, low secular geomagnetic variations in Central Pacific, and the preferred paths of geomagnetic pole reversals.
Cracking of rocks and rock-like materials exhibits a rich variety of patterns where tensile (mode I) and shear (mode II) fractures are often interwoven. These mixed-mode fractures are usually cohesive (quasi-brittle) and frictional. Although phase-field modeling is increasingly used for rock fracture simulation, no phase-field formulation is available for cohesive and frictional mixed-mode fracture. To address this shortfall, here we develop a double-phase-field formulation that employs two different phase fields to describe cohesive tensile fracture and frictional shear fracture individually. The formulation rigorously combines the two phase fields through three approaches: (i) crack-direction-based decomposition of the strain energy into the tensile, shear, and pure compression parts, (ii) contact-dependent calculation of the potential energy, and (iii) energy-based determination of the dominant fracturing mode in each contact condition. We validate the proposed model, both qualitatively and quantitatively, with experimental data on mixed-mode fracture in rocks. The validation results demonstrate that the double-phase-field model -- a combination of two quasi-brittle phase-field models -- allows one to directly use material strengths measured from experiments, unlike brittle phase-field models for mixed-mode fracture in rocks. Another standout feature of the double-phase-field model is that it can simulate, and naturally distinguish between, tensile and shear fractures without complex algorithms.
The heat flux across the core-mantle boundary (QCMB) is the key parameter to understand the Earth/s thermal history and evolution. Mineralogical constraints of the QCMB require deciphering contributions of the lattice and radiative components to the thermal conductivity at high pressure and temperature in lower mantle phases with depth-dependent composition. Here we determine the radiative conductivity (krad) of a realistic lower mantle (pyrolite) in situ using an ultra-bright light probe and fast time-resolved spectroscopic techniques in laser-heated diamond anvil cells. We find that the mantle opacity increases critically upon heating to ~3000 K at 40-135 GPa, resulting in an unexpectedly low radiative conductivity decreasing with depth from ~0.8 W/m/K at 1000 km to ~0.35 W/m/K at the CMB, the latter being ~30 times smaller than the estimated lattice thermal conductivity at such conditions. Thus, radiative heat transport is blocked due to an increased optical absorption in the hot lower mantle resulting in a moderate CMB heat flow of ~8.5 TW, at odds with present estimates based on the mantle and core dynamics. This moderate rate of core cooling implies an inner core age of about 1 Gy and is compatible with both thermally- and compositionally-driven ancient geodynamo.
Scattering of seismic waves can reveal subsurface structures but usually in a piecemeal way focused on specific target areas. We used a manifold learning algorithm called the Sequencer to simultaneously analyze thousands of seismograms of waves diffracting along the core-mantle boundary and obtain a panoptic view of scattering across the Pacific region. In nearly half of the diffracting waveforms, we detected seismic waves scattered by three-dimensional structures near the core-mantle boundary. The prevalence of these scattered arrivals shows that the region hosts pervasive lateral heterogeneity. Our analysis revealed loud signals due to a plume root beneath Hawaii and a previously unrecognized ultralow-velocity zone beneath the Marquesas Islands. These observations illustrate how approaches flexible enough to detect robust patterns with little to no user supervision can reveal distinctive insights into the deep Earth.
In order to better understand the interaction between pore-fluid overpressure and failure patterns in rocks we consider a porous elasto-plastic medium in which a laterally localized overpressure line source is imposed at depth below the free surface. We solve numerically the fluid filtration equation coupled to the gravitational force balance and poro-elasto-plastic rheology equations. Systematic numerical simulations, varying initial stress, intrinsic material properties and geometry, show the existence of five distinct failure patterns caused by either shear banding or tensile fracturing. The value of the critical pore-fluid overpressure at the onset of failure is derived from an analytical solution that is in excellent agreement with numerical simulations. Finally, we construct a phase-diagram that predicts the domains of the different failure patterns and at the onset of failure.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
