Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userGrowth, strain and spin orbit torques in epitaxial NiMnSb films sputtered on GaAs
122
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We report current-induced spin torques in epitaxial NiMnSb films on a commercially available epi-ready GaAs substrate. The NiMnSb was grown by co-sputtering from three targets using optimised parameter. The films were processed into micro-scale bars to perform current-induced spin-torque measurements. Magnetic dynamics were excited by microwave currents and electric voltages along the bars were measured to analyse the symmetry of the current-induced torques. We found that the extracted symmetry of the spin torques matches those expected from spin-orbit interaction in a tetragonally distorted half-Heusler crystal. Both field-like and damping-like torques are observed in all the samples characterised, and the efficiency of the current-induced torques is comparable to that of ferromagnetic metal/heavy metal bilayers.
rate research
Read More
We report on photoluminescence in the 3-7 $mu$m mid-wave infrared (MWIR) range from sub-100 nm strained thin films of rocksalt PbSe(001) grown on GaAs(001) substrates by molecular beam epitaxy. These bare films, grown epitaxially at temperatures below 400 {deg}C, luminesce brightly at room temperature and have minority carrier lifetimes as long as 172 ns. The relatively long lifetimes in PbSe thin films are achievable despite threading dislocation densities exceeding $10^9$ $cm^{-2}$ arising from island growth on the nearly 8% lattice- and crystal-structure-mismatched GaAs substrate. Using quasi-continuous-wave and time-resolved photoluminescence, we show Shockley-Read-Hall recombination is slow in our high dislocation density PbSe films at room temperature, a hallmark of defect tolerance. Power-dependent photoluminescence and high injection excess carrier lifetimes at room temperature suggest that degenerate Auger recombination limits the efficiency of our films, though the Auger recombination rates are significantly lower than equivalent, III-V bulk materials and even a bit slower than expectations for bulk PbSe. Consequently, the combined effects of defect tolerance and low Auger recombination rates yield an estimated peak internal quantum efficiency of roughly 30% at room temperature, unparalleled in the MWIR for a severely lattice-mismatched thin film. We anticipate substantial opportunities for improving performance by optimizing crystal growth as well as understanding Auger processes in thin films. These results highlight the unique opportunity to harness the unusual chemical bonding in PbSe and related IV-VI semiconductors for heterogeneously integrated mid-infrared light sources constrained by tight thermal budgets in new device designs.
The epitaxy of MoO2 on c_plane sapphire substrates is examined. A theoretical approach, based on density functional theory calculations of the strain energy, allowed to predict the preferred layer/substrate epitaxial relationships. To test the results of these calculations, MoO2/(001) Al2O3 heterostructures were grown using the chemically_driven isothermal close space vapour transport technique. At the early stages of the growth, two kinds of morphologies were obtained, using the same growth parameters: lying and standing flakes. The composition and morphology, as well as the layer/substrate epitaxial relationships were determined for both kind of morphologies. Experimental epitaxial relationships coincide with those predicted by DFT calculation as the most favourable ones in terms of strain energy. For thicker films, the standing flakes evolve to form an epitaxial porous layer composed by coalesced epitaxial flakes. The interfacial strain between the sapphire substrate and MoO2 enables a self_organization from nanometer to micron scales between separated or coalesced flakes, depending on deposition condition.
Materials that crystalize in diamond-related lattices, with Si and GaAs as their prime examples, are at the foundation of modern electronics. Simultaneoulsy, the two atomic sites in the unit cell of these crystals form inversion partners which gives rise to relativistic non-equilibrium spin phenomena highly relevant for magnetic memories and other spintronic devices. When the inversion-partner sites are occupied by the same atomic species, electrical current can generate local spin polarization with the same magnitude and opposite sign on the two inversion-partner sites. In CuMnAs, which shares this specific crystal symmetry of the Si lattice, the effect led to the demonstration of electrical switching in an antiferromagnetic memory at room temperature. When the inversion-partner sites are occupied by different atoms, a non-zero global spin-polarization is generated by the applied current which can switch a ferromagnet, as reported at low temperatures in the diluted magnetic semiconductor (Ga,Mn)As. Here we demonstrate the effect of the global current-induced spin polarization in a counterpart crystal-symmetry material NiMnSb which is a member of the broad family of magnetic Heusler compounds. It is an ordered high-temperature ferromagnetic metal whose other favorable characteristics include high spin-polarization and low damping of magnetization dynamics. Our experiments are performed on strained single-crystal epilayers of NiMnSb grown on InGaAs. By performing all-electrical ferromagnetic resonance measurements in microbars patterned along different crystal axes we detect room-temperature spin-orbit torques generated by effective fields of the Dresselhaus symmetry. The measured magnitude and symmetry of the current-induced torques are consistent with our relativistic density-functional theory calculations.
Spin-orbit torque (SOT) is an emerging technology that enables the efficient manipulation of spintronic devices. The initial processes of interest in SOTs involved electric fields, spin-orbit coupling, conduction electron spins and magnetization. More recently interest has grown to include a variety of other processes that include phonons, magnons, or heat. Over the past decade, many materials have been explored to achieve a larger SOT efficiency. Recently, holistic design to maximize the performance of SOT devices has extended material research from a nonmagnetic layer to a magnetic layer. The rapid development of SOT has spurred a variety of SOT-based applications. In this Roadmap paper, we first review the theories of SOTs by introducing the various mechanisms thought to generate or control SOTs, such as the spin Hall effect, the Rashba-Edelstein effect, the orbital Hall effect, thermal gradients, magnons, and strain effects. Then, we discuss the materials that enable these effects, including metals, metallic alloys, topological insulators, two-dimensional materials, and complex oxides. We also discuss the important roles in SOT devices of different types of magnetic layers. Afterward, we discuss device applications utilizing SOTs. We discuss and compare three-terminal and two-terminal SOT-magnetoresistive random-access memories (MRAMs); we mention various schemes to eliminate the need for an external field. We provide technological application considerations for SOT-MRAM and give perspectives on SOT-based neuromorphic devices and circuits. In addition to SOT-MRAM, we present SOT-based spintronic terahertz generators, nano-oscillators, and domain wall and skyrmion racetrack memories. This paper aims to achieve a comprehensive review of SOT theory, materials, and applications, guiding future SOT development in both the academic and industrial sectors.
We study the electronic and magnetic properties of the interfaces between the half-metallic Heusler alloy NiMnSb and the binary semiconductors InP and GaAs using two different state-of-the-art full-potential textit{ab-initio} electronic structure methods. Although in the case of most NiMnSb/InP(001) contacts the half-metallicity is lost, it is possible to keep a high degree of spin-polarization when the interface is made up by Ni and P layers. In the case of the GaAs semiconductor the larger hybridization between the Ni-$d$ and As-$p$ orbitals with respect to the hybridization between the Ni-$d$ and P-$p$ orbitals destroys this polarization. The (111) interfaces present strong interface states but also in this case there are few interfaces presenting a high spin-polarization at the Fermi level which can reach values up to 74%.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
