Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userFully coupled electromagnetic-thermal-mechanical comparative simulation of direct vs hybrid microwave sintering of 3Y-ZrO 2
125
0
0.0
(
0
)
Authors
Charles Mani`ere
Ask ChatGPT about the research
No Arabic abstract
Direct and hybrid microwave sintering of 3Y-ZrO 2 are comparatively studied at frequency of 2.45 GHz. Using the continuum theory of sintering, a fully coupled electromagnetic-thermalmechanical (EMTM) finite element simulation is carried out to predict powder samples deformation during their microwave processing. Direct and hybrid heating configurations are computationally tested using advanced heat transfer simulation tools including the surface to surface thermal radiation boundary conditions and a numeric proportional-integral-derivative (PID) regulation. The developed modeling framework shows a good agreement of the calculation results with the known experimental data on the microwave sintering of 3Y-ZrO 2 in terms of the densification kinetics. It is shown that the direct heating configuration renders highly hot spot effects resulting in non-homogenous densification causing processed specimens final shape distortions. Compared to the direct heating, the hybrid heating configuration provides a reduction of the thermal inhomogeneity along with a densification homogenization. As a result of the hybrid heating, the total densification of the specimen is attained without specimen distortions. It is also shown that the reduction of the sample size has a stabilization effect on the temperature and relative density spatial distributions.
rate research
Read More
Flash sintering phenomena are predominantly associated with ceramics due to thermal runaway of their electric conductivity noticeably represented in materials such as zirconia or silicon carbide. Because of their high electric conductivity, flash sintering of metals is nearly inexistent. In this work, an original metal powder flash sintering method based on a microwave approach is presented. Within the developed approach, an unusually fast (60 s) thermal and sintering runaway of Ti-6Al-4V powder is experimentally revealed under microwave illumination. This phenomenon is simulated based on an electromagnetic-thermal-mechanical (EMTM) model. The developed multiphysics model reveals that the metal powder specimens runaway does not result from its intrinsic material properties, but results from the resonance phenomenon thermally activated by the surrounding tooling material. The EMTM simulation predicts with a very good accuracy the microwave repartition and the resulting densification and powder specimens shape distortions observed experimentally. The comparison of the microwave and conventional sintering kinetics indicates an important acceleration of the sintering behavior under microwave heating. The developed sintering approach has a potential of the implementation for time-effective mass production of small metal parts.
A novel Stochastic Event-Driven Molecular Dynamics (SEDMD) algorithm is developed for the simulation of polymer chains suspended in a solvent. The polymers are represented as chains of hard spheres tethered by square wells and interact with the solvent particles with hard core potentials. The algorithm uses Event-Driven Molecular Dynamics (EDMD) for the simulation of the polymer chain and the interactions between the chain beads and the surrounding solvent particles. The interactions between the solvent particles themselves are not treated deterministically as in event-driven algorithms, rather, the momentum and energy exchange in the solvent is determined stochastically using the Direct Simulation Monte Carlo (DSMC) method. The coupling between the solvent and the solute is consistently represented at the particle level, however, unlike full MD simulations of both the solvent and the solute, the spatial structure of the solvent is ignored. The algorithm is described in detail and applied to the study of the dynamics of a polymer chain tethered to a hard wall subjected to uniform shear. The algorithm closely reproduces full MD simulations with two orders of magnitude greater efficiency. Results do not confirm the existence of periodic (cycling) motion of the polymer chain.
Steering waves in elastic solids is more demanding than steering waves in electromagnetism or acoustics. As a result, designing material distributions which are the counterpart of optical invisibility cloaks in elasticity poses a major challenge. Waves of all polarizations should be guided around an obstacle to emerge on the downstream side as though no obstacle were there. Recently, we have introduced the direct-lattice-transformation approach. This simple and explicit construction procedure led to extremely good cloaking results in the static case. Here, we transfer this approach to the dynamic case, i.e., to elastic waves or phonons. We demonstrate broadband reduction of scattering, with best suppressions exceeding a factor of five when using cubic coordinate transformations instead of linear ones. To reliably and quantitatively test these cloaks efficiency, we use an effective-medium approach.
Kinetic Monte Carlo approach is developed to study aspects of sintering of dispersed nanoparticles of bimodal size distributions. We explore mechanisms of neck development when sintering is initiated at elevated temperatures for nanosize crystalline surfaces of particles of different sizes. Specifically, the role of smaller particles fitting between larger particles, on the sintering of the latter is considered. Formation of stable necks bridging particles at the nanoscale was found to be governed by layering or clustering mechanisms at the facing surfaces, with clustering leading to a much faster formation of the bridging structure. Temperature, particle sizes and local arrangement, as well as other geometrical factors were found to have a profound effect on sintering mediated by a smaller particle placed in a void between larger particles.
We synthesized pure and Co-doped (6.25 12.5 at.) ZrO$_2$ nanopowders in order to study their magnetic properties.We analyzed magnetic behavior as a function of the amount of Co and the oxygenation, which was controlled by low pressure thermal treatments. As prepared pure and Co-doped samples are diamagnetic and paramagnetic respectively. Ferromagnetism can be induced by performing low pressure thermal treatments, which becomes stronger as the dwell time of the thermal treatment is increased. This behavior can be reversed, recovering the initial diamagnetic or paramagnetic behavior, by performing reoxidizing thermal treatments. Also, a cumulative increase can be observed in the saturation of the magnetization with the number of low pressure thermal treatments performed. We believe that this phenomenon indicates that cobalt segregation induced by the thermal treatments is the responsible for the magnetic properties of the ZrO$_2$ Co system.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
