Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userSwelling negation during sintering of sterling silver: An experimental and theoretical approach
270
0
0.0
(
0
)
Authors
Charles Mani`ere
Ask ChatGPT about the research
No Arabic abstract
One of the main challenges of the sintering of sterling silver is the phenomenon of swelling causing de-densification and a considerable reduction of the sintering kinetics. This swelling phenomenon opposes sintering and it needs to be addressed by a well-controlled processing atmosphere. In the present study, the pressure-less sintering behavior of sterling silver is investigated in air, argon, and vacuum. A specially modified spark plasma sintering mold is designed to study the pressure-less sintering of sterling silver in a high vacuum environment. The conducted analysis is extended to the new constitutive equations of sintering enabling the prediction of the swelling phenomena and the identification of the internal equivalent pressure that opposes the sintering.
rate research
Read More
Graphite creep has high importance for applications using high pressures (100 MPa) and temperatures close to 2000 {textdegree}C. In particular, the new flash spark plasma sintering process (FSPS) is highly sensitive to graphite creep when applied to ultra-high temperature materials such as silicon carbide. In this flash process taking only a few seconds, the graphite tooling reaches temperatures higher than 2000 {textdegree}C resulting in its irreversible deformation. The graphite tooling creep prevents the flash spark plasma sintering process from progressing further. In this study, a finite element model is used to determine FSPS tooling temperatures. In this context, we explore the graphite creep onset for temperatures above 2000 {textdegree}C and for high pressures. Knowing the graphite high temperature limit, we modify the FSPS process so that the sintering occurs outside the graphite creep range of temperatures/pressures. 95 % dense silicon carbide compacts are obtained in about 30 s using the optimized FSPS.
A numerical model able to simulate solid-state constrained sintering is presented. The model couples an existing kinetic Monte Carlo (kMC) model for free sintering with a finite element model (FEM) for calculating stresses on a microstructural level. The microstructural response to the local stress as well as the FEM calculation of the stress field from the microstructural evolution is discussed. The sintering behavior of a sample constrained by a rigid substrate is simulated. The constrained sintering results in a larger number of pores near the substrate, as well as anisotropic sintering shrinkage, with significantly enhanced strain in the central upper part of the sample surface, and minimal strain at the edges near the substrate. All these features have also previously been observed experimentally.
Solid-state dewetting phenomenon in silver thin films offers a straightforward method to obtain structures having controlled shape or size -this latter in principle spanning several orders of magnitudes -- with potentially strong interest in many applications involving high-tech industry and biomedicine. In this work nanostructured silver is deposited by pulsed electron ablation technique and its surface modified upon thermal treatments in air at increasing temperatures. Surface chemistry and morphology are then monitored simultaneously by X-ray photoemission spectroscopy and atomic force microscopy; in particular, the power spectral density of surface heights is used to analyze the alteration of morphology induced by annealing. It is shown that this approach adds a level of information about the dewetting process since it allows to separate between long- and short-range surface behavior and to retrieve statistical quantities relevant to a description of the features in view of applications. Our results are presented in the framework of a multidisciplinary approach, advantages and limits of which are deepened and discussed.
The study is devoted to geometrically non-linear modelling of viscoplastic structures with residual stresses. We advocate and develop a special approach to residual stresses based on the transition between reference configurations. The finite strain kinematics of the viscoplastic material is modelled by the multiplicative decomposition of the deformation gradient tensor. Numerical algorithms originally developed for unstressed materials are extended to materials with pre-stresses. Owing to the weak invariance of constitutive equations, the incorporation of pre-stresses happens without additional costs. Thus, the advocated approach is especially efficient. A novel experimental/theoretical method for assessment of residual stresses in welded structures is presented; the method combines advantages of purely experimental and theoretical approaches. To demonstrate the applicability of the proposed procedure, we simulate plate welding. As an example we show that the procedure allows to extrapolate the filed of residual stresses away from the measurement points. As another example, we address the reduction of weldment-related residual stresses by mechanical treatment.
Flash sintering phenomena are predominantly associated with ceramics due to thermal runaway of their electric conductivity noticeably represented in materials such as zirconia or silicon carbide. Because of their high electric conductivity, flash sintering of metals is nearly inexistent. In this work, an original metal powder flash sintering method based on a microwave approach is presented. Within the developed approach, an unusually fast (60 s) thermal and sintering runaway of Ti-6Al-4V powder is experimentally revealed under microwave illumination. This phenomenon is simulated based on an electromagnetic-thermal-mechanical (EMTM) model. The developed multiphysics model reveals that the metal powder specimens runaway does not result from its intrinsic material properties, but results from the resonance phenomenon thermally activated by the surrounding tooling material. The EMTM simulation predicts with a very good accuracy the microwave repartition and the resulting densification and powder specimens shape distortions observed experimentally. The comparison of the microwave and conventional sintering kinetics indicates an important acceleration of the sintering behavior under microwave heating. The developed sintering approach has a potential of the implementation for time-effective mass production of small metal parts.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
