Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userProbing the Phonon Mean Free Paths in Dislocation Core by Molecular Dynamics Simulation
88
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Thermal management is extremely important for designing high-performance devices. The lattice thermal conductivity of materials is strongly dependent on the structural defects at different length scales, particularly point defects like vacancies, line defects like dislocations, and planar defects such as grain boundaries. Traditionally, the McKelvey-Shockley phonon Boltzmanns transport equation (BTE) method combined with molecular dynamics simulations has been widely used to evaluate the phonon mean free paths (MFPs) in defective systems. However, this method can only provide the aggregate MFPs of the whole sample. It is, therefore, challenging to extract the MFPs in the different regions with different thermal properties. In this study, the 1D McKelvey-Shockley phonon BTE method was extended to model inhomogeneous materials, where the effect of defects on the phonon MFPs is explicitly obtained. Then, the method was used to study the phonon interactions with the core structure of an edge dislocation. The phonon MFPs in the dislocation core were obtained and consistent with the analytical model such that high frequency phonons are likely to be scattered in this area. This method not only advances the knowledge of phonon-dislocation scattering but also shows the potential to investigate phonon transport behaviors in more complicated materials.
rate research
Read More
Sub-micron-thick layers of hexagonal boron nitride (hBN) exhibit high in-plane thermal conductivity and useful optical properties, and serve as dielectric encapsulation layers with low electrostatic inhomogeneity for graphene devices. Despite the promising applications of hBN as a heat spreader, the cross-plane phonon mean free paths in hBN have not been measured. We measure the cross-plane thermal conductivity of hBN flakes exfoliated from bulk crystals. We find that the thermal conductivity is extremely sensitive to film thickness. We measure a forty-fold increase in the cross-plane thermal conductivity between 7 nm and 585 nm flakes at 285 {deg}K. We attribute the large increase in thermal conductivity with increasing thickness to contributions from phonons with long mean free paths (MFPs), spanning many hundreds of nanometers in the thickest flakes. When planar twist interfaces are introduced into the crystal by mechanically stacking multiple thin flakes, the cross-plane thermal conductivity of the stack is found to be a factor of seven below that of individual flakes with similar total thickness, thus providing strong evidence that phonon scattering at twist boundaries limits the maximum phonon MFPs. These results improve our understanding of thermal transport in two-dimensional materials and have important implications for hBN integration in nanoelectronics.
By using molecular dynamics simulation, formation mechanisms of amorphous carbon in particular sp${}^3$ rich structure was researched. The problem that reactive empirical bond order potential cannot represent amorphous carbon properly was cleared in the transition process from graphite to diamond by high pressure and the deposition process of amorphous carbon thin films. Moreover, the new potential model which is based on electron distribution simplified as a point charge was developed by using downfolding method. As a result, the molecular dynamics simulation with the new potential could demonstrate the transition from graphite to diamond at the pressure of 15 GPa corresponding to experiment and the deposition of sp${}^3$ rich amorphous carbon.
In this work we study the diffusion mechanisms in lithium disilicate melt using molecular dynamics simulation, which has an edge over other simulation methods because it can track down actual atomic rearrangements in materials once a realistic interaction potential is applied. Our simulation results of diffusion coefficients show an excellent agreement with experiments. We also demonstrate that our system obeys the famous Stokes-Einstein relation at least down to 1400 K, while a decoupling between relaxation and viscosity takes place at a higher temperature. Additionally, an analysis on the dynamical behavior of slow-diffusing atoms reveals explicitly the presence of dynamical heterogeneities.
Sodium niobate (NaNbO3) exhibits most complex sequence of structural phase transitions in perovskite family and therefore provides as excellent model system for understanding the mechanism of structural phase transitions. We report temperature dependence of inelastic neutron scattering measurements of phonon densities of states in sodium niobate. The measurements are carried out in various crystallographic phases of this material at various temperatures from 300 K to 1048 K. The phonon spectra exhibit peaks centered around 19, 37, 51, 70 and 105 meV. Interestingly, the peak around 70 meV shifts significantly towards lower energy with increasing temperature, while the other peaks do not exhibit an appreciable change. The phonon spectra at 783 K show prominent change and become more diffusive as compared to those at 303 K. In order to better analyze these features, we have performed first principles lattice dynamics calculations based on the density functional theory. The computed phonon density of states is found to be in good agreement with the experimental data. Based on our calculation we are able to assign the characteristic Raman modes in the antiferroelectric phase to the A1g symmetry, which are due to the folding of the T (w=95 cm-1) and delta(w=129 cm-1) points of the cubic Brillouin zone.
Strain engineering is critical to the performance enhancement of electronic and thermoelectric devices because of its influence on the material thermal conductivity. However, current experiments cannot probe the detailed physics of the phonon-strain interaction due to the complex, inhomogeneous, and long-distance features of the strain field in real materials. Dislocations provide us with an excellent model to investigate these inhomogeneous strain fields. In this study, non-equilibrium molecular dynamics simulations were used to study the lattice thermal conductivity of PbTe under different strain status tuned by dislocation densities. The extended 1D McKelvey-Shockley flux method was used to analyze the frequency dependence of phonon scattering in the inhomogeneously strained regions of dislocations. A spatially resolved phonon dislocation scattering process was shown, where the unequal strain in different regions affected the magnitude and frequency-dependence of the scattering rate. Our study not only advances the knowledge of strain scattering of phonon propagation but offers fundamental guidance on optimizing thermal management by structure design.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
