Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userThe surface of (1) Ceres in visible light as seen by Dawn/VIR
175
0
0.0
(
0
)
Authors
B. Rousseau
Ask ChatGPT about the research
No Arabic abstract
We study the surface of Ceres at visible wavelengths, as observed by the Visible and InfraRed mapping spectrometer (VIR) onboard the Dawn spacecraft, and analyze the variations of various spectral parameters across the whole surface. We also focus on several noteworthy areas of the surface of this dwarf planet. We made use of the newly corrected VIR visible data to build global maps of a calibrated radiance factor at 550 nm, with two color composites and three spectral slopes between 400 and 950 nm. We have made these maps available for the community via the Aladin Desktop software. Ceres surface shows diverse spectral behaviors in the visible range. The color composite and the spectral slope between 480 and 800 nm highlight fresh impact craters and young geologic formations of endogenous origin, which appear bluer than the rest of the surface. The steep slope before 465 nm displays very distinct variations and may be a proxy for the absorptions caused by the $O_2^{-}$ -> $Fe^{3+}$ or the $2Fe^{3+}$ -> $Fe^{2+} + Fe^{4+}$ charge transfer, if the latter are found to be responsible for the drop in this spectral range. We notice several similarities between the spectral slopes and the abundance of phyllosilicates detected in the infrared by the VIR, whereas no correlation can be clearly established with carbonate species. The region of the Dantu impact crater presents a peculiar spectral behavior (especially through the color and the spectral slope before 465 nm) suggesting a change in composition or in the surface physical properties that is not observed elsewhere on Ceres.
rate research
Read More
The Visible-Infrared Mapping Spectrometer (VIR) on board the Dawn spacecraft revealed that aqueous secondary minerals -- Mg-phyllosilicates, NH4-bearing phases, and Mg/Ca carbonates -- are ubiquitous on Ceres. Ceres low reflectance requires dark phases, which were assumed to be amorphous carbon and/or magnetite (~80 wt.%). In contrast, the Gamma Ray and Neutron Detector (GRaND) constrained the abundances of C (8-14 wt.%) and Fe (15-17 wt.%). Here, we reconcile the VIR-derived mineral composition with the GRaND-derived elemental composition. First, we model mineral abundances from VIR data, including either meteorite-derived insoluble organic matter, amorphous carbon, magnetite, or combination as the darkening agent and provide statistically rigorous error bars from a Bayesian algorithm combined with a radiative-transfer model. Elemental abundances of C and Fe are much higher than is suggested by the GRaND observations for all models satisfying VIR data. We then show that radiative transfer modeling predicts higher reflectance from a carbonaceous chondrite of known composition than its measured reflectance. Consequently, our second models use multiple carbonaceous chondrite endmembers, allowing for the possibility that their specific textures or minerals other than carbon or magnetite act as darkening agents, including sulfides and tochilinite. Unmixing models with carbonaceous chondrites eliminate the discrepancy in elemental abundances of C and Fe. Ceres average reflectance spectrum and elemental abundances are best reproduced by carbonaceous-chondrite-like materials (40-70 wt.%), IOM or amorphous carbon (10 wt.%), magnetite (3-8 wt.%), serpentine (10-25 wt.%), carbonates (4-12 wt.%), and NH4-bearing phyllosilicates (1-11 wt.%).
We study the spectrophotometric properties of dwarf planet Ceres in the VIS-IR spectral range by means of hyper-spectral images acquired by the VIR imaging spectrometer on board the NASA Dawn mission. Disk-resolved observations with a phase angle within the $7^{circ}<alpha<132^{circ}$ interval were used to characterize Ceres phase curve in the 0.465-4.05 $mu$m spectral range. Hapkes model was applied to perform the photometric correction of the dataset, allowing us to produce albedo and color maps of the surface. The $V$-band magnitude phase function of Ceres was fitted with both the classical linear model and H-G formalism. The single-scattering albedo and the asymmetry parameter at 0.55$mu$m are $w=0.14pm0.02$ and $xi=-0.11pm0.08$, respectively (two-lobe Henyey-Greenstein phase function); the modeled geometric albedo is $0.094pm0.007$; the roughness parameter is $bar{theta}=29^{circ}pm6^{circ}$. Albedo maps indicate small variability on a global scale with an average reflectance of $0.034 pm 0.003$. Isolated areas such as the Occator bright spots, Haulani, and Oxo show an albedo much higher than average. We measure a significant spectral phase reddening, and the average spectral slope of Ceres surface after photometric correction is $1.1%kAA^{-1}$ and $0.85%kAA^{-1}$ at VIS and IR wavelengths, respectively. Broadband color indices are $V-R=0.38pm0.01$ and $R-I=0.33pm0.02$. H-G modeling of the $V$-band magnitude phase curve for $alpha<30^{circ}$ gives $H=3.14pm0.04$ and $G=0.10pm0.04$, while the classical linear model provides $V(1,1,0^{circ})=3.48pm0.03$ and $beta=0.036pm0.002$. The comparison with spectrophotometric properties of other minor bodies indicates that Ceres has a less back-scattering phase function and a slightly higher albedo than comets and C-type objects. However, the latter represents the closest match in the usual asteroid taxonomy.
This work describes the correction method applied to the dataset acquired at the asteroid (4) Vesta by the visible channel of the visible and infrared mapping spectrometer. The rising detector temperature during data acquisitions in the visible wavelengths leads to a spectral slope increase over the whole spectral range. This limits the accuracy of the studies of the Vesta surface in this wavelength range. Here, we detail an empirical method to correct for the visible detector temperature dependency while taking into account the specificity of the Vesta dataset.
The surface reflectance of planetary regoliths may increase dramatically towards zero phase angle, a phenomenon known as the opposition effect (OE). Two physical processes that are thought to be the dominant contributors to the brightness surge are shadow hiding (SH) and coherent backscatter (CB). The occurrence of shadow hiding in planetary regoliths is self-evident, but it has proved difficult to unambiguously demonstrate CB from remote sensing observations. One prediction of CB theory is the wavelength dependence of the OE angular width. The Dawn spacecraft observed the OE on the surface of dwarf planet Ceres. We characterize the OE over the resolved surface, including the bright Cerealia Facula, and to find evidence for SH and/or CB. We analyze images of the Dawn framing camera by means of photometric modeling of the phase curve. We find that the OE of most of the investigated surface has very similar characteristics, with an enhancement factor of 1.4 and a FWHM of 3{deg} (broad OE). A notable exception are the fresh ejecta of the Azacca crater, which display a very narrow brightness enhancement that is restricted to phase angles $< 0.5${deg} (narrow OE); suggestively, this is in the range in which CB is thought to dominate. We do not find a wavelength dependence for the width of the broad OE, and lack the data to investigate the dependence for the narrow OE. The prediction of a wavelength-dependent CB width is rather ambiguous. The zero-phase observations allow us to determine Ceres visible geometric albedo as $p_V = 0.094 pm 0.005$. A comparison with other asteroids suggests that Ceres broad OE is typical for an asteroid of its spectral type, with characteristics that are primarily linked to surface albedo. Our analysis suggests that CB may occur on the dark surface of Ceres in a highly localized fashion.
We present a global spectrophotometric characterization of the Ceres surface using Dawn Framing Camera (FC) images. We identify the photometric model that yields the best results for photometrically correcting images. Corrected FC images acquired on approach to Ceres were assembled into global maps of albedo and color. Generally, albedo and color variations on Ceres are muted. The albedo map is dominated by a large, circular feature in Vendimia Planitia, known from HST images (Li et al., 2006), and dotted by smaller bright features mostly associated with fresh-looking craters. The dominant color variation over the surface is represented by the presence of blue material in and around such craters, which has a negative spectral slope over the visible wavelength range when compared to average terrain. We also mapped variations of the phase curve by employing an exponential photometric model, a technique previously applied to asteroid Vesta (Schroder et al., 2013b). The surface of Ceres scatters light differently from Vesta in the sense that the ejecta of several fresh-looking craters may be physically smooth rather than rough. High albedo, blue color, and physical smoothness all appear to be indicators of youth. The blue color may result from the desiccation of ejected material that is similar to the phyllosilicates/water ice mixtures in the experiments of Poch et al. (2016). The physical smoothness of some blue terrains would be consistent with an initially liquid condition, perhaps as a consequence of impact melting of subsurface water ice. We find red terrain (positive spectral slope) near Ernutet crater, where De Sanctis et al. (2017) detected organic material. The spectrophotometric properties of the large Vendimia Planitia feature suggest it is a palimpsest, consistent with the Marchi et al. (2016) impact basin hypothesis. The central bright area in Occator crater, Cerealia...
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
