Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userEffects of bacterial density on growth rate and characteristics of microbial-induced CaCO3 precipitates: a particle-scale experimental study
87
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Microbial-Induced Carbonate Precipitation (MICP) has been explored for more than a decade as a promising soil improvement technique. However, it is still challenging to predict and control the growth rate and characteristics of CaCO3 precipitates, which directly affect the engineering performance of MICP-treated soils. In this study, we employ a microfluidics-based pore scale model to observe the effect of bacterial density on the growth rate and characteristics of CaCO3 precipitates during MICP processes occurring at the sand particle scale. Results show that the precipitation rate of CaCO3 increases with bacterial density in the range between 0.6e8 and 5.2e8 cells/ml. Bacterial density also affects both the size and number of CaCO3 crystals. A low bacterial density of 0.6e8 cells/ml produced 1.1e6 crystals/ml with an average crystal volume of 8,000 um3, whereas a high bacterial density of 5.2e8 cells/ml resulted in more crystals (2.0e7 crystals/ml) but with a smaller average crystal volume of 450 um3. The produced CaCO3 crystals were stable when the bacterial density was 0.6e8 cells/ml. When the bacterial density was 4-10 times higher, the crystals were first unstable and then transformed into more stable CaCO3 crystals. This suggests that bacterial density should be an important consideration in the design of MICP protocols.
rate research
Read More
Microbial fuel cells implemented in constructed wetlands (CW-MFCs), albeit a relatively new technology still under study, have shown to improve treatment efficiency of urban wastewater. So far the vast majority of CW-MFC systems investigated were designed as lab-scale systems working under rather unrealistic hydraulic conditions using synthetic wastewater. The main objective of this work was to quantify CW-MFCs performance operated under different conditions in a more realistic setup using meso-scale systems with horizontal flow fed with real urban wastewater. Operational conditions tested were organic loading rate (4.9+-1.6, 6.7+-1.4 and 13.6+-3.2 g COD/m2.day) and hydraulic regime (continuous vs intermittent feeding) as well as different electrical connections: CW control (conventional CW without electrodes), open-circuit CW-MFC (external circuit between anode and cathode not connected) and closed-circuit CW-MFC (external circuit connected). Eight horizontal subsurface flow CWs were operated for about four months. Each wetland consisted of a PVC reservoir of 0.193 m2 filled with 4/8 mm granitic riverine gravel. All wetlands had intermediate sampling points for gravel and interstitial liquid sampling. The CW-MFCs were designed as three MFCs incorporated one after the other along the flow path of the CWs. Results showed no significant differences between tested organic loading rates, hydraulic regimes or electrical connections, however, on average, systems operated in closed-circuit CW-MFC mode under continuous flow outperformed the other experimental conditions. Closed-circuit CW-MFC compared to conventional CW control systems showed around 5% and 22% higher COD and ammonium removal, respectively. Correspondingly, overall bacteria activity, as measured by the fluorescein diacetate technique, was higher (4% to 34%) in closed-circuit systems when compared to CW control systems.
In Mediterranean aquaculture little research has examined the interaction between rearing density and dietary composition on main key performance indicators, physiological processes and gut bacterial community. A study was undertaken, therefore to assess growth response, digestive enzyme activity, humoral immunity on skin mucus, plasma biochemistry and gut microbiota of gilthead sea bream (Sparus aurata, L. 1758) reared at high (HD) and low (LD) final stocking densities and fed high (FM30FO15, 30 % fishmeal FM, 15 % fish oil, FO) and low (FM10FO3; 10 % FM and 3 % FO) FM and FO levels. Isonitrogenous and isolipidic extruded diets were fed to triplicate fish groups (initial weight: 96.2 g) to overfeeding over 98 days. The densities tested had no major effects on overall growth and feed efficiency of sea bream reared at high or low FM and FO dietary level. Results of digestive enzyme activity indicated a comparable digestive efficiency among rearing densities and within each dietary treatment. Plasma parameters related to nutritional and physiological conditions were not affected by rearing densities under both nutritional conditions a similar observation was also achieved through the study of lysozyme, protease, antiprotease and total protein determination in skin mucus, For the first time on this species, the effect of rearing density on gut bacterial community was studied. Different response in relation to dietary treatment under HD and LD were detected. Low FM-FO diet maintained steady the biodiversity of the gut bacterial community between LD and HD conditions while fish fed high FM-FO level showed a reduced biodiversity at HD. According to the results, it seems feasible to rear gilthead sea bream at the on-growing phase at a density up to 36-44 kg m3 with low or high FM-FO diet without negatively affecting growth, feed efficiency, welfare condition and gut bacterial community.
For more than ten years now, many efforts have been done to identify and characterize nature of obstructed diffusion in model and cellular lipid membranes. Amongst all the techniques developed for this purpose, FCS, by means of determination of FCS diffusion laws, has been shown to be a very efficient approach. In this paper, FCS diffusion laws are used to probe the behavior of a pure lipid and a lipid mixture at temperatures below and above phase transitions, both numerically, using a full thermodynamic model, and experimentally. In both cases FCS diffusion laws exhibit deviation from free diffusion and reveal the existence of domains. The variation of these domains mean size with temperature is in perfect correlation with the enthalpy fluctuation.
The spreading of bacterial populations is central to processes in agriculture, the environment, and medicine. However, existing models of spreading typically focus on cells in unconfined settings--despite the fact that many bacteria inhabit complex and crowded environments, such as soils, sediments, and biological tissues/gels, in which solid obstacles confine the cells and thereby strongly regulate population spreading. Here, we develop an extended version of the classic Keller-Segel model of bacterial spreading that incorporates the influence of confinement in promoting both cell-solid and cell-cell collisions. Numerical simulations of this extended model demonstrate how confinement fundamentally alters the dynamics and morphology of spreading bacterial populations, in good agreement with recent experimental results. In particular, with increasing confinement, we find that cell-cell collisions increasingly hinder the initial formation and the long-time propagation speed of chemotactic pulses. Moreover, also with increasing confinement, we find that cellular growth and division plays an increasingly dominant role in driving population spreading--eventually leading to a transition from chemotactic spreading to growth-driven spreading via a slower, jammed front. This work thus provides a theoretical foundation for further investigations of the influence of confinement on bacterial spreading. More broadly, these results help to provide a framework to predict and control the dynamics of bacterial populations in complex and crowded environments.
Brain tissue is a heterogeneous material, constituted by a soft matrix filled with cerebrospinal fluid. The interactions between, and the complexity of each of these components are responsible for the non-linear rate-dependent behaviour that characterizes what is one of the most complex tissue in nature. Here, we investigate the influence of the cutting rate on the fracture properties of brain, through wire cutting experiments. We also present a model for the rate-dependent behaviour of fracture propagation in soft materials, which comprises the effects of fluid interaction through a poro-hyperelastic formulation. The method is developed in the framework of finite strain continuum mechanics, implemented in a commercial finite element code, and applied to the case of an edge-crack remotely loaded by a controlled displacement. Experimental and numerical results both show a toughening effect with increasing rates, which is linked to the energy dissipated by the fluid-solid interactions in the process zone ahead of the crack.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
