Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userOptical trapping of the transversal motion for an optically levitated mirror
150
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Optomechanical systems are suitable for elucidating quantum phenomena at the macroscopic scale in the sense of the mass scale. The systems should be well-isolated from the environment to avoid classical noises, which conceal quantum signals. Optical levitation is a promising way to isolate optomechanical systems from the environment. To realize optical levitation, all degrees of freedom need to be trapped. Until now, longitudinal trapping and rotational trapping of a mirror with optical radiation pressure have been studied in detail and validated with various experiments. However, less attention has been paid to the transversal trapping of a mirror. Herein, we report a pioneering result where we experimentally confirmed transversal trapping of a mirror of a Fabry-Perot cavity using a torsional pendulum. Through this demonstration, we experimentally proved that optical levitation is realizable with only two Fabry-Perot cavities that are aligned vertically. This work paves the way toward optical levitation and realizing a macroscopic quantum system.
rate research
Read More
Optically levitated nanoparticles have recently emerged as versatile platforms for investigating macroscopic quantum mechanics and enabling ultrasensitive metrology. In this article we theoretically consider two damping regimes of an optically levitated nanoparticle cooled by cavityless parametric feedback. Our treatment is based on a generalized Fokker-Planck equation derived from the quantum master equation presented recently and shown to agree very well with experiment [1]. For low damping, we find that the resulting Wigner function yields the single-peaked oscillator position distribution and recovers the appropriate energy distribution derived earlier using a classical theory and verified experimentally [2]. For high damping, in contrast, we predict a double-peaked position distribution, which we trace to an underlying bistability induced by feedback. Unlike in cavity-based optomechanics, stochastic processes play a major role in determining the bistable behavior. To support our conclusions, we present analytical expressions as well as numerical simulations using the truncated Wigner function approach. Our work opens up the prospect of developing bistability-based devices, characterization of phase-space dynamics, and investigation of the quantum-classical transition using levitated nanoparticles.
Torque sensors such as the torsion balance enabled the first determination of the gravitational constant by Cavendish and the discovery of Coulombs law. Torque sensors are also widely used in studying small-scale magnetism, the Casimir effect, and other applications. Great effort has been made to improve the torque detection sensitivity by nanofabrication and cryogenic cooling. The most sensitive nanofabricated torque sensor has achieved a remarkable sensitivity of $10^{-24} rm{Nm}/sqrt{rm{Hz}}$ at millikelvin temperatures in a dilution refrigerator. Here we dramatically improve the torque detection sensitivity by developing an ultrasensitive torque sensor with an optically levitated nanorotor in vacuum. We measure a torque as small as $(1.2 pm 0.5) times 10^{-27} rm{Nm}$ in 100 seconds at room temperature. Our system does not require complex nanofabrication or cryogenic cooling. Moreover, we drive a nanoparticle to rotate at a record high speed beyond 5 GHz (300 billion rpm). Our calculations show that this system will be able to detect the long-sought vacuum friction near a surface under realistic conditions. The optically levitated nanorotor will also have applications in studying nanoscale magnetism and quantum geometric phase.
Levitated oscillators with millimeter or sub-millimeter size are particularly attractive due to their potential role in studying various fundamental problems and practical applications. One of the crucial issues towards these goals is to achieve efficient measurements of oscillator motion, while this remains a challenge. Here we theoretically propose a lens-free optical detection scheme, which can be used to detect the motion of a millimeter or sub-millimeter levitated oscillator with a measurement efficiency close to the standard quantum limit with a modest optical power. We demonstrate experimentally this scheme on a 0.5 mm diameter micro-sphere that is diamagnetically levitated under high vacuum and room temperature, and the thermal motion is detected with high precision. Based on this system, an estimated acceleration sensitivity of $9.7 times 10^{-10}rm g/sqrt{Hz}$ is achieved, which is more than one order improvement over the best value reported by the levitated mechanical system. Due to the stability of the system, the minimum resolved acceleration of $3.5times 10^{-12}rm g$ is reached with measurement times of $10^5$ s. This result is expected to have potential applications in the study of exotic interactions in the millimeter or sub-millimeter range and the realization of compact gravimeter and accelerometer.
Levitated optomechanics has great potentials in precision measurements, thermodynamics, macroscopic quantum mechanics and quantum sensing. Here we synthesize and optically levitate silica nanodumbbells in high vacuum. With a linearly polarized laser, we observe the torsional vibration of an optically levitated nanodumbbell in vacuum. The linearly-polarized optical tweezer provides a restoring torque to confine the orientation of the nanodumbbell, in analog to the torsion wire which provides restoring torque for suspended lead spheres in the Cavendish torsion balance. Our calculation shows its torque detection sensitivity can exceed that of the current state-of-the-art torsion balance by several orders. The levitated nanodumbbell torsion balance provides rare opportunities to observe the Casimir torque and probe the quantum nature of gravity as proposed recently. With a circularly-polarized laser, we drive a 170-nm-diameter nanodumbbell to rotate beyond 1~GHz, which is the fastest nanomechanical rotor realized to date. Our calculations show that smaller silica nanodumbbells can sustain rotation frequency beyond 10 GHz. Such ultrafast rotation may be used to study material properties and probe vacuum friction.
We investigate the emission of single photons from CdSe/CdS dot-in-rods which are optically trapped in the focus of a deep parabolic mirror. Thanks to this mirror, we are able to image almost the full 4$pi$ emission pattern of nanometer-sized elementary dipoles and verify the alignment of the rods within the optical trap. From the motional dynamics of the emitters in the trap we infer that the single-photon emission occurs from clusters comprising several emitters. We demonstrate the optical trapping of rod-shaped quantum emitters in a configuration suitable for efficiently coupling an ensemble of linear dipoles with the electromagnetic field in free space.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
