Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userPockels Soliton Microcomb
79
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Kerr soliton microcombs have recently emerged as a prominent topic in integrated photonics and enabled new horizons for optical frequency metrology. Kerr soliton microcombs, as its name suggests, are based on the high-order cubic optical nonlinearity. It is desirable to exploit quadratic photonic materials, namely Pockels materials, for soliton generation and on-chip implementation of 1f-2f comb self-referencing. Such quadratically-driven solitons have been theoretically proposed, but have not yet been observed in a nanophotonic platform despite of recent progresses in quadratic comb generation in free-space and crystalline resonators. Here we report photonic chip-based Pockels microcomb solitons driven by three-wave mixing in an aluminum nitride microring resonator. In contrast to typical Kerr solitons, our Pockels soliton features unity soliton generation fidelity, two-by-two annihilation of multi-soliton states, favorable tuning dynamics, and high pump-to-soliton conversion efficiency.
rate research
Read More
The Terahertz or millimeter wave frequency band (300 GHz - 3 THz) is spectrally located between microwaves and infrared light and has attracted significant interest for applications in broadband wireless communications, space-borne radiometers for Earth remote sensing, astrophysics, and imaging. In particular optically generated THz waves are of high interest for low-noise signal generation. In particular optically generated THz waves are of high interest for low-noise signal generation. Here, we propose and demonstrate stabilized terahertz wave generation using a microresonator-based frequency comb (microcomb). A unitravelling-carrier photodiode (UTC-PD) converts low-noise optical soliton pulses from the microcomb to a terahertz wave at the solitons repetition rate (331 GHz). With a free-running microcomb, the Allan deviation of the Terahertz signal is 4.5*10^-9 at 1 s measurement time with a phase noise of -72 dBc/Hz (-118 dBc/Hz) at 10 kHz (10 MHz) offset frequency. By locking the repetition rate to an in-house hydrogen maser, in-loop fractional frequency stabilities of 9.6*10^-15 and 1.9*10^-17 are obtained at averaging times of 1 s and 2000 s respectively, limited by the maser reference signal. Moreover, the terahertz signal is successfully used to perform a proof-of-principle demonstration of terahertz imaging of peanuts. Combining the monolithically integrated UTC-PD with an on-chip microcomb, the demonstrated technique could provide a route towards highly stable continuous terahertz wave generation in chip-scale packages for out-of-the-lab applications. In particular, such systems would be useful as compact tools for high-capacity wireless communication, spectroscopy, imaging, remote sensing, and astrophysical applications.
Laser based ranging (LiDAR) - already ubiquitously used in robotics, industrial monitoring, or geodesy - is a key sensor technology for future autonomous driving, and has been employed in nearly all successful implementations of autonomous vehicles to date. Coherent laser allows long-range detection, operates eye safe, is immune to crosstalk and yields simultaneous velocity and distance information. Yet for actual deployment in vehicles, video frame-rate requirements for object detection, classification and sensor fusion mandate megapixel per second measurement speed. Such pixel rates are not possible to attain with current coherent single laser-detector architectures at high definition range imagining, and make parallelization essential. A megapixel class coherent LiDAR has not been demonstrated, and is still impeded by the arduous requirements of large banks of detectors and digitizers on the receiver side, that need to be integrated on chip. Here we report hardware efficient coherent laser ranging at megapixel per second imaging rates. This is achieved using a novel concept for massively parallel coherent laser ranging that requires only a single laser and a single photoreceiver, yet achieves simultaneous recording of more than 64 channels with distance and velocity measurements each - attaining an unprecedented 5 megapixel per second rate. Heterodyning two offset chirped soliton microcombs on a single coherent receiver yields an interferogram containing both distance and velocity information of all particular channels, thereby alleviating the need to individually separate, detect and digitize distinct channels. The reported LiDAR implementation is hardware-efficient, compatible with photonic integration and demonstrates the significant advantages of acquisition speed, complexity and cost benefits afforded by the convergence of optical telecommunication and metrology technologies.
The past decade has witnessed major advances in the development of microresonator-based frequency combs (microcombs) that are broadband optical frequency combs with repetition rates in the millimeter-wave to microwave domain. Integrated microcombs can be manufactured using wafer-scale process and have been applied in numerous applications. Most of these advances are based on the harnessing of dissipative Kerr solitons (DKS) in optical microresonators with anomalous group velocity dispersion (GVD). However, microcombs can also be generated with normal GVD using dissipative localized structures that are referred to as dark pulse, switching wave or platicon. Importantly, as most materials feature intrinsic normal GVD, the requirement of dispersion engineering is significantly relaxed for platicon generation. Therefore while DKS microcombs require particular designs and fabrication processes, platicon microcombs can be readily built using standard CMOS-compatible platforms such as thin-film (i.e. typically below 300 nm) Si3N4. Yet laser self-injection locking that has been recently used to create highly compact integrated DKS microcomb modules has not been demonstrated for platicons. Here we report the first fully integrated platicon microcomb operating at a microwave-K-band repetition rate. Using laser self-injection locking of a DFB laser edge-coupled to a Si3N4 microresonator, platicons are electrically initiated and stably maintained, enabling a compact microcomb module without any complex control. We further characterize the phase noise of the platicon repetition rate and the pumping laser. The observation of self-injection-locked platicons facilitates future wide adoption of microcombs as a build-in block in standard photonic integrated architectures via commercial foundry service.
The synthesis of ultralow-noise microwaves is of both scientific and technological relevance for timing, metrology, communications and radio-astronomy. Today, the lowest reported phase noise signals are obtained via optical frequency-division using mode-locked laser frequency combs. Nonetheless, this technique ideally requires high repetition rates and tight comb stabilisation. Here, a soliton microcomb with a 14 GHz repetition rate is generated with an ultra-stable pump laser and used to derive an ultralow-noise microwave reference signal, with an absolute phase noise level below -60 dBc/Hz at 1 Hz offset frequency and -135 dBc/Hz at 10 kHz. This is achieved using a transfer oscillator approach, where the free-running microcomb noise (which is carefully studied and minimised) is cancelled via a combination of electronic division and mixing. Although this proof-of-principle uses an auxiliary comb for detecting the microcombs offset frequency, we highlight the prospects of this method with future self-referenced integrated microcombs and electro-optic combs, that would allow for ultralow-noise microwave and sub-terahertz signal generators.
Microcombs -- optical frequency combs generated in coherently-driven nonlinear microresonators -- have attracted significant attention over the last decade. The ability to generate two such combs in a single resonator device has in particular enabled a host of applications from spectroscopy to imaging. Concurrently, novel comb generation techniques such as synchronous pulsed driving have been developed to enhance the efficiency and flexibility of microcomb generation. Here we report on the first experimental demonstration of dual-microcomb generation via synchronous pulsed pumping of a single microresonator. Specifically, we use two electro-optically generated pulse trains derived from a common continuous wave laser to simultaneously drive two orthogonal polarization modes of an integrated silica ring resonator, observing the generation of coherent dissipative Kerr cavity soliton combs on both polarization axes. Thanks to the resonator birefringence, the two soliton combs are associated with different repetition rates, thus realizing a dual-microcomb source. To illustrate the sources application potential, we demonstrate proof-of-concept spectroscopic measurements.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
