Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userDeepReceiver: A Deep Learning-Based Intelligent Receiver for Wireless Communications in the Physical Layer
105
0
0.0
(
0
)
Added by
Shilian Zheng
Publication date
2020
fields
Electronic Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
A canonical wireless communication system consists of a transmitter and a receiver. The information bit stream is transmitted after coding, modulation, and pulse shaping. Due to the effects of radio frequency (RF) impairments, channel fading, noise and interference, the signal arriving at the receiver will be distorted. The receiver needs to recover the original information from the distorted signal. In this paper, we propose a new receiver model, namely DeepReceiver, that uses a deep neural network to replace the traditional receivers entire information recovery process. We design a one-dimensional convolution DenseNet (1D-Conv-DenseNet) structure, in which global pooling is used to improve the adaptability of the network to different input signal lengths. Multiple binary classifiers are used at the final classification layer to achieve multi-bit information stream recovery. We also exploit the DeepReceiver for unified blind reception of multiple modulation and coding schemes (MCSs) by including signal samples of corresponding MCSs in the training set. Simulation results show that the proposed DeepReceiver performs better than traditional step-by-step serial hard decision receiver in terms of bit error rate under the influence of various factors such as noise, RF impairments, multipath fading, cochannel interference, dynamic environment, and unified reception of multiple MCSs.
rate research
Read More
In this paper, we introduce an intelligent reflecting surface (IRS) to provide a programmable wireless environment for physical layer security. By adjusting the reflecting coefficients, the IRS can change the attenuation and scattering of the incident electromagnetic wave so that it can propagate in a desired way toward the intended receiver. Specifically, we consider a downlink multiple-input single-output (MISO) broadcast system where the base station (BS) transmits independent data streams to multiple legitimate receivers and keeps them secret from multiple eavesdroppers. By jointly optimizing the beamformers at the BS and reflecting coefficients at the IRS, we formulate a minimum-secrecy-rate maximization problem under various practical constraints on the reflecting coefficients. The constraints capture the scenarios of both continuous and discrete reflecting coefficients of the reflecting elements. Due to the non-convexity of the formulated problem, we propose an efficient algorithm based on the alternating optimization and the path-following algorithm to solve it in an iterative manner. Besides, we show that the proposed algorithm can converge to a local (global) optimum. Furthermore, we develop two suboptimal algorithms with some forms of closed-form solutions to reduce the computational complexity. Finally, the simulation results validate the advantages of the introduced IRS and the effectiveness of the proposed algorithms
As a subfield of network coding, physical-layer network coding (PNC) can effectively enhance the throughput of wireless networks by mapping superimposed signals at receiver to other forms of user messages. Over the past twenty years, PNC has received significant research attention and has been widely studied in various communication scenarios, e.g., two-way relay communications (TWRC), nonorthogonal multiple access (NOMA) in 5G networks, random access networks, etc. To ensure network reliability, channel-coded PNC is proposed and related communication techniques are investigated, such as the design of channel code, low-complexity decoding, and cross-layer design. In this article, we briefly review the variants of channel-coded PNC wireless communications with the aim of inspiring future research activities in this area. We also put forth open research problems along with a few selected research directions under PNC-aided frameworks.
We consider adversarial machine learning based attacks on power allocation where the base station (BS) allocates its transmit power to multiple orthogonal subcarriers by using a deep neural network (DNN) to serve multiple user equipments (UEs). The DNN that corresponds to a regression model is trained with channel gains as the input and allocated transmit powers as the output. While the BS allocates the transmit power to the UEs to maximize rates for all UEs, there is an adversary that aims to minimize these rates. The adversary may be an external transmitter that aims to manipulate the inputs to the DNN by interfering with the pilot signals that are transmitted to measure the channel gain. Alternatively, the adversary may be a rogue UE that transmits fabricated channel estimates to the BS. In both cases, the adversary carefully crafts adversarial perturbations to manipulate the inputs to the DNN of the BS subject to an upper bound on the strengths of these perturbations. We consider the attacks targeted on a single UE or all UEs. We compare these attacks with a benchmark, where the adversary scales down the input to the DNN. We show that adversarial attacks are much more effective than the benchmark attack in terms of reducing the rate of communications. We also show that adversarial attacks are robust to the uncertainty at the adversary including the erroneous knowledge of channel gains and the potential errors in exercising the attacks exactly as specified.
Intelligent communication is gradually considered as the mainstream direction in future wireless communications. As a major branch of machine learning, deep learning (DL) has been applied in physical layer communications and has demonstrated an impressive performance improvement in recent years. However, most of the existing works related to DL focus on data-driven approaches, which consider the communication system as a black box and train it by using a huge volume of data. Training a network requires sufficient computing resources and extensive time, both of which are rarely found in communication devices. By contrast, model-driven DL approaches combine communication domain knowledge with DL to reduce the demand for computing resources and training time. This article reviews the recent advancements in the application of model-driven DL approaches in physical layer communications, including transmission scheme, receiver design, and channel information recovery. Several open issues for further research are also highlighted after presenting the comprehensive survey.
In this paper, we propose a deep reinforcement learning (DRL) approach for solving the optimisation problem of the networks sum-rate in device-to-device (D2D) communications supported by an intelligent reflecting surface (IRS). The IRS is deployed to mitigate the interference and enhance the signal between the D2D transmitter and the associated D2D receiver. Our objective is to jointly optimise the transmit power at the D2D transmitter and the phase shift matrix at the IRS to maximise the network sum-rate. We formulate a Markov decision process and then propose the proximal policy optimisation for solving the maximisation game. Simulation results show impressive performance in terms of the achievable rate and processing time.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
