Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userBlack phosphorus van der Waals heterostructures light emitting diodes for mid-infrared silicon photonics
435
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Light-emitting diodes (LEDs) based on III-V/II-VI materials have delivered a compelling performance in the mid-infrared (mid-IR) region, which enabled wide-ranging applications, including environmental monitoring, defense and medical diagnostics. Continued efforts are underway to realize on-chip sensors via heterogeneous integration of mid-IR emitters on a silicon photonic chip. But the uptake of such approach is limited by the high costs and interfacial strains, associated with the process of heterogeneous integrations. Here, the black phosphorus (BP)-based van der Waals (vdW) heterostructures are exploited as room temperature LEDs. The demonstrated devices can emit linearly polarized light, and their spectra cover the technologically important mid-IR atmospheric window (3-4 um). Additionally, the BP LEDs exhibit fast modulation speed as well as exceptional stability, and its peak extrinsic quantum efficiency (QE~0.9%) is comparable to the III-V/II-VI mid-IR LEDs. By leveraging the integrability of vdW heterostructures, we further demonstrate a silicon photonic waveguide-integrated BP LED. The reported hybrid platform holds great promise for mid-IR silicon photonics.
rate research
Read More
To fully exploit van der Waals materials and heterostructures, new mass-scalable production routes that are low cost but preserve the high electronic and optical quality of the single crystals are required. Here, we demonstrate an approach to realize a variety of functional heterostructures based on van der Waals nanocrystal films produced through the mechanical abrasion of bulk powders. Significant performance improvements are realized in our devices compared to those fabricated through ink-jet printing of nanocrystal dispersions. To highlight the simplicity and scalability of the technology a multitude of different functional heterostructure devices such as resistors, capacitors, photovoltaics as well as energy devices such as large-area catalyst coatings for hydrogen evolution reaction and multilayer heterostructures for triboelectric nanogenerators are shown. The simplicity of the device fabrication, scalability, and compatibility with flexible substrates makes this a promising technological route for up-scalable van der Waals heterostructures.
The individual building blocks of van der Waals (vdW) heterostructures host fascinating physical phenomena, ranging from ballistic electron transport in graphene to striking optical properties of MoSe2 sheets. The presence of bonded and non-bonded cohesive interactions in a vdW heterostructure, promotes diversity in their structural arrangements, which in turn profoundly modulate the properties of their individual constituents. Here, we report on the presence of correlated structural disorder coexisting with the nearly perfect crystallographic order along the growth direction of epitaxial vdW heterostructures of Bi2Se3/graphene/SiC. Using the depth penetration of X-ray diffraction microscopy and scattering, we probed their crystal structure from atomic to mesoscopic length scales, to reveal that their structural diversity is underpinned by spatially correlated disorder states. The presence of the latter induces on a system, widely considered to behave as a collection of nearly independent 2-dimensional units, a pseudo-3-dimensional character, when subjected to epitaxial constraints and ordered substrate interactions. These findings shed new light on the nature of the vast structural landscape of vdW heterostructures and could enable new avenues in modulating their unique properties by correlated disorder.
Two-dimensional semiconductors are excellent candidates for next-generation electronics and optoelec-tronics thanks to their electrical properties and strong light-matter interaction. To fabricate devices with optimal electrical properties, it is crucial to have both high-quality semiconducting crystals and ideal con-tacts at metal-semiconductor interfaces. Thanks to the mechanical exfoliation of van der Waals crystals, atomically-thin high-quality single-crystals can easily be obtained in a laboratory. However, conventional metal deposition techniques can introduce chemical disorder and metal-induced mid-gap states that induce Fermi level pinning and can degrade the metal-semiconductor interfaces, resulting in poorly performing devices. In this article, we explore the electrical contact characteristics of Au-InSe and graphite-InSe van der Waals contacts, obtained by stacking mechanically exfoliated InSe flakes onto pre-patterned Au or graphite electrodes without the need of lithography or metal deposition. The high quality of the metal-semiconductor interfaces obtained by van der Waals contact allows to fabricate high-quality Schottky di-odes based on the Au-InSe Schottky barrier. Our experimental observation indicates that the contact barrier at the graphite-InSe interface is negligible due to the similar electron affinity of InSe and graphite, while the Au-InSe interfaces are dominated by a large Schottky barrier.
The radiative recombination of injected charge carriers gives rise to electroluminescence (EL), a central process for light-emitting diode (LED) operation. It is often presumed in some emerging fields of optoelectronics, including perovskite and organic LEDs, that the minimum voltage required for light emission is the semiconductor bandgap divided by the elementary charge. Here we show for many classes of LEDs, including those based on metal halide perovskite, organic, chalcogenide quantum-dot and commercial III-V semiconductors, photon emission can be generally observed at record-low driving voltages of 36%-60% of their bandgaps, corresponding to a large apparent energy gain of 0.6-1.4 eV per emitted photon. Importantly, for various classes of LEDs with very different modes of charge injection and recombination (dark saturation current densities ranging from ~10^-35 to ~10^-21 mA/cm2), their EL intensity-voltage curves under low voltages exhibit similar behaviors, revealing a universal origin of ultralow-voltage device operation. Finally, we demonstrate as a proof-of-concept that perovskite LEDs can transmit data efficiently to a silicon detector at 1V, a voltage below the silicon bandgap. Our work provides a fresh insight into the operational limits of electroluminescent diodes, highlighting the significant potential of integrating low-voltage LEDs with silicon electronics for next-generation communications and computational applications.
Van der Waals materials can be easily combined in lateral and vertical heterostructures, providing an outstanding platform to engineer elusive quantum states of matter. However, a critical problem in material science is to establish tangible links between real materials properties and terms that can be cooked up on the model Hamiltonian level to realize different exotic phenomena. Our review aims to do precisely this: we first discuss, in a way accessible to the materials community, what ingredients need to be included in the hybrid quantum materials recipe, and second, we elaborate on the specific materials that would possess the necessary qualities. We will review the well-established procedures for realizing 2D topological superconductors, quantum spin-liquids and flat bands systems, emphasizing the connection between well-known model Hamiltonians and real compounds. We will use the most recent experimental results to illustrate the power of the designer approach.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
