Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userOn the variation of solar coronal rotation using SDO/AIA observations
63
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We report on the variability of rotation periods of solar coronal layers with respect to temperature (or, height). For this purpose, we have used the observations from Atmospheric Imaging Assembly (AIA) telescope on board Solar Dynamics Observatory (SDO) space mission. The images used are at the wavelengths 94 {AA}, 131 {AA}, 171 {AA}, 193 {AA}, 211 {AA}, and 335 {AA} for the period from 2012 to 2018. Analysis of solar full disk images obtained at these wavelengths by AIA is carried out using flux modulation method. Seventeen rectangular strips/bins at equal interval of 10 degrees (extending from 80 degree South to 80 degree North on the Sun) are selected to extract a time series of extreme ultraviolet (EUV) intensity variations to obtain auto-correlation coefficient. The peak of Gaussian fit to first secondary maxima in the autocorrelogram gives synodic rotation period. Our analysis shows the differential rotation with respect to latitude as well as temperature (or, height). In the present study, we find that the sidereal rotation periods of different coronal layers decrease with increasing temperature (or, height). Average sidereal rotation period at the lowest temperature (~ 600000 Kelvin) corresponding to AIA-171 {AA} which originates from the upper transition region/quiet corona is 27.03 days. The sidereal rotation period decreases with temperature (or, height) to 25.47 days at the higher temperature (~10 million Kelvin) corresponding to the flaring regions of solar corona as seen in AIA-131 {AA} observations.
rate research
Read More
We present an empirical model based on the visible area covered by coronal holes close to the central meridian in order to predict the solar wind speed at 1 AU with a lead time up to four days in advance with a 1hr time resolution. Linear prediction functions are used to relate coronal hole areas to solar wind speed. The function parameters are automatically adapted by using the information from the previous 3 Carrington Rotations. Thus the algorithm automatically reacts on the changes of the solar wind speed during different phases of the solar cycle. The adaptive algorithm has been applied to and tested on SDO/AIA-193A observations and ACE measurements during the years 2011-2013, covering 41 Carrington Rotations. The solar wind speed arrival time is delayed and needs on average 4.02 +/- 0.5 days to reach Earth. The algorithm produces good predictions for the 156 solar wind high speed streams peak amplitudes with correlation coefficients of cc~0.60. For 80% of the peaks, the predicted arrival matches within a time window of 0.5 days of the ACE in situ measurements. The same algorithm, using linear predictions, was also applied to predict the magnetic field strength from coronal hole areas but did not give reliable predictions (cc~0.2).
In this paper, we carry out multiwavelength observations of three recurring jets on 2014 November 7. The jets originated from the same region at the edge of AR 12205 and propagated along the same coronal loop. The eruptions were generated by magnetic reconnection, which is evidenced by continuous magnetic cancellation at the jet base. The projected initial velocity of the jet2 is 402 km s. The accelerations in the ascending and descending phases of jet2 are not consistent, the former is considerably larger than the value of solar gravitational acceleration at the solar surface, while the latter is lower than solar gravitational acceleration. There are two possible candidates of extra forces acting on jet2 during its propagation. One is the downward gas pressure from jet1 when it falls back and meets with jet2. The other is the viscous drag from the surrounding plasma during the fast propagation of jet2. As a contrast, the accelerations of jet3 in the rising and falling phases are constant, implying that the propagation of jet3 is not significantly influenced byextra forces.
Using the multi-wavelength data from the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO) spacecraft, we study a jet occurred in coronal hole near the northern pole of the Sun. The jet presented distinct helical upward motion during ejection. By tracking six identified moving features (MFs) in the jet, we found that the plasma moved at an approximately constant speed along the jets axis, meanwhile, they made a circular motion in the plane transverse to the axis. Inferred from linear and trigonometric fittings to the axial and transverse heights of the six tracks, the mean values of axial velocities, transverse velocities, angular speeds, rotation periods, and rotation radiuses of the jet are 114 km s$^{-1}$, 136 km s$^{-1}$, 0.81degr s$^{-1}$, 452 s, and 9.8 $times$ 10$^{3}$ km respectively. As the MFs rose, the jet width at the corresponding height increased. For the first time, we derived the height variation of the longitudinal magnetic field strength in the jet from the assumption of magnetic flux conservation. Our results indicate that, at the heights of 1 $times$ 10$^{4}$ $sim$ 7 $times$ 10$^{4}$ km from jet base, the flux density in the jet decreased from about 15 to 3 G as a function of B=0.5(R/R$_{sun}$-1)$^{-0.84}$ (G). A comparison was made with the other results in previous studies.
We report an observation of a partially erupting prominence and associated dynamical plasma processes based on observations recorded by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO). The prominence first goes through a slow rise (SR) phase followed by a fast rise (FR). The slow rise phase started after a couple of small brightenings seen toward the footpoints. At the turning point from SR to FR, the prominence had already become kinked. The prominence shows strong brightening at the central kink location during the start of FR. We interpret this as internal magnetic reconnection occurring at a vertical current sheet forming between the two legs of the erupting prominence (flux-rope). The brightening at the central kink location is seen in all the EUV channels of AIA. The contributions of differential emission at higher temperatures are larger compared to that for typical coronal temperatures supporting a reconnection scenario at the central kink location. The plasma above the brightening location gets ejected as a hot plasmoid-like structure embedded in a CME, and those below drain down in the form of blobs moving towards the Suns surface. The unique time resolution of the AIA has allowed all of these eruptive aspects, including SR-to-FR, kinking, central current sheet formation, plasmoid-like eruption, and filament splitting, to be observed in a single event, providing strong and comprehensive evidence in favour of the model of partially erupting flux ropes.
Taking advantage of both the high temporal and spatial resolution of the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO), we studied a limb coronal shock wave and its associated extreme ultraviolet (EUV) wave that occurred on 2010 June 13. Our main findings are (1) the shock wave appeared clearly only in the channels centered at 193 AA and 211 AA as a dome-like enhancement propagating ahead of its associated semi-spherical CME bubble; (2) the density compression of the shock is 1.56 according to radio data and the temperature of the shockis around 2.8 MK; (3) the shock wave first appeared at 05:38 UT, 2 minutes after the associated flare has started and 1 minute after its associated CME bubble appeared;(4) the top of the dome-like shock wave set out from about 1.23 Rodot and the thickness of the shocked layer is ~ 2times10^4 km; (5) the speed of the shock wave is consistent with a slight decrease from about 600 km/s to 550 km/s; (6) the lateral expansion of the shock wave suggests a constant speed around 400 km/s, which varies at different heights and directions. Our findings support the view that the coronal shock wave is driven by the CME bubble, and the on-limb EUV wave is consistent with a fast wave or at least includes the fast wave component.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
