Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userCompact optical polarization-insensitive zoom metalens-doublet
207
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Metasurface-based lenses (metalenses) offer specific conceptual advantages compared to ordinary refractive lenses. For example, it is possible to tune the focal length of a metalens doublet by varying the relative angle between the two metalenses while fixing their distance, leading to an extremely compact zoom lens. An improved polarization-insensitive design based on silicon-nanocylinders on silica substrates is presented. This design is realized and characterized experimentally at 1550 nm wavelength. By varying the relative angle between the metalenses in steps of 10 degrees, tuning of the doublet focal length is demonstrated from -54 mm to -+3 mm to +54 mm. This results in a zoom factor of an imaging system varying between 1 and 18. For positive focal lengths, the doublet focusing efficiency has a minimum of 34% and a maximum of 83%. Experiment and theory are in very good agreement.
rate research
Read More
Optical levitation of dielectric particles in vacuum is a powerful technique for precision measurements, testing fundamental physics, and quantum information science. Conventional optical tweezers require bulky optical components for trapping and detection. Here we design and fabricate an ultrathin dielectric metalens with a high numerical aperture of 0.88 at 1064 nm in vacuum. It consists of 500 nm-thick silicon nano-antennas, which are compatible with ultrahigh vacuum. We demonstrate optical levitation of nanoparticles in vacuum with a single metalens. The trapping frequency can be tuned by changing the laser power and polarization. We also transfer a levitated nanoparticle between two separated optical tweezers. Optical levitation with an ultrathin metalens in vacuum provides opportunities for a wide range of applications including on-chip sensing. Such metalenses will also be useful for trapping ultacold atoms and molecules.
Optical metasurfaces have shown to be a powerful approach to planar optical elements, enabling an unprecedented control over light phase and amplitude. At that stage, where wide variety of static functionalities have been accomplished, most efforts are being directed towards achieving reconfigurable optical elements. Here, we present our approach to an electrically controlled varifocal metalens operating in the visible frequency range. It relies on dynamically controlling the refractive index environment of a silicon metalens by means of an electric resistor embedded into a thermo-optical polymer. We demonstrate precise and continuous tuneability of the focal length and achieve focal length variation larger than the Rayleigh length for voltage as small as 12 volts. The system time-response is of the order of 100 ms, with the potential to be reduced with further integration. Finally, the imaging capability of our varifocal metalens is successfully validated in an optical microscopy setting. Compared to conventional bulky reconfigurable lenses, the presented technology is a lightweight and compact solution, offering new opportunities for miniaturized smart imaging devices.
Active metasurfaces, whose optical properties can be modulated post-fabrication, have emerged as an intensively explored field in recent years. The efforts to date, however, still face major performance limitations in tuning range, optical quality, and efficiency especially for non mechanical actuation mechanisms. In this paper, we introduce an active metasurface platform combining phase tuning covering the full 2$pi$ range and diffraction-limited performance using an all-dielectric, low-loss architecture based on optical phase change materials (O-PCMs). We present a generic design principle enabling switching of metasurfaces between two arbitrary phase profiles and propose a new figure-of-merit (FOM) tailored for active meta-optics. We implement the approach to realize a high-performance varifocal metalens operating at 5.2 $mu$m wavelength. The metalens is constructed using Ge2Sb2Se4Te1 (GSST), an O-PCM with a large refractive index contrast ($Delta$ n > 1) and unique broadband low-loss characteristics in both amorphous and crystalline states. The reconfigurable metalens features focusing efficiencies above 20% at both states for linearly polarized light and a record large switching contrast ratio of 29.5 dB. We further validated aberration-free imaging using the metalens at both optical states, which represents the first experimental demonstration of a non-mechanical active metalens with diffraction-limited performance.
Compact fiber-to-chip couplers play an important role in optical interconnections, especially in data centers. However, the development of couplers has been mostly limited to standard single-mode fibers, with few devices compatible with multicore and multimode fibers. Through the use of state-of-the-art optimization algorithms, we designed two ultra-compact couplers for use in a seven-core fiber with 32 $mu$m core spacing. We demonstrate for the first time a compact dual-polarization coupler capable of addressing all cores simultaneously, with measured coupling efficiency of $-$4.3 dB and with a 3-dB bandwidth of 48 nm. We also demonstrate a single-polarization coupler with efficiency of $-$2.9 dB and an operating bandwidth of 77 nm. The dual-polarization coupler has footprint of 20 $mu$m $times$ 10 $mu$m per core, which makes it the smallest fiber-to-chip coupler experimentally demonstrated on a standard silicon-on-insulator platform.
The ongoing effort to implement compact and cheap optical systems is the main driving force for the recent flourishing research in the field of optical metalenses. Metalenses are a type of metasurface, used for focusing and imaging applications, and are implemented based on the nanopatterning of an optical surface. The challenge faced by metalens research is to reach high levels of performance, using simple fabrication methods suitable for mass-production. In this paper we present a Huygens nanoantenna based metalens, designed for outdoor photographic/surveillance applications in the near-infra-red. We show that good imaging quality can be obtained over a field-of-view (FOV) as large as +/-15 degrees. This first successful implementation of metalenses for outdoor imaging applications is expected to provide insight and inspiration for future metalens imaging applications.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
