Do you want to publish a course? Click here

Casting dissipative compact states in coherent perfect absorbers

179   0   0.0 ( 0 )
 Added by Carlo Danieli
 Publication date 2020
  fields Physics
and research's language is English




Ask ChatGPT about the research

Coherent perfect absorption (CPA), also known as time-reversed laser, is a wave phenomenon resulting from the reciprocity of destructive interference of transmitted and reflected waves. In this work we consider quasi one-dimensional lattice networks which posses at least one flat band, and show that CPA and lasing can be induced in both linear and nonlinear regimes of this lattice by fine-tuning non-Hermitian defects (dissipative terms localized within one unit-cell). We show that local dissipations that yield CPA simultaneously yield novel dissipative compact solutions of the lattice, whose growth or decay in time can be fine-tuned via the dissipation parameter. The scheme used to numerically visualize the theoretical findings offers a novel platform for the experimental implementation of these phenomena in optical devices.



rate research

Read More

We report the experimental realization of acoustic coherent perfect absorption (CPA) of four symmetric scatterers of very different structures. The only conditions necessary for these scatterers to exhibit CPA are that both the reflection and transmission amplitudes of the scatterers are 0.5 under one incident wave, and there are two collinear and counter-propagating incident waves with appropriate relative amplitude and phase. Nearly 1000 times in the modulation of output power has been demonstrated by changing the relative phase of the incident waves over 180{deg}. We further demonstrate that these scatterers are sensitive devices to detect the small differences between two nearly equal incident waves. A 27 % change in the strength of the scattering wave has been demonstrated for every degree of phase deviation from the optimum condition between the incident waves.
69 - Rasoul Alaee , Yaswant Vaddi , 2020
We propose a tunable coherent perfect absorber based on ultrathin nonlinear metasurfaces. The nonlinear metasurface is made of plasmonic nanoantennas coupled to an epsilon-near-zero material with a large optical nonlinearity. The coherent perfect absorption is achieved by controlling the relative phases of the input beams. We show that the optical response of the nonlinear metasurface can be tuned from a complete to a partial absorption by changing the intensity of the pump beam. The proposed nonlinear metasurface can be used to design optically tunable thermal emitters, modulators, and sensors.
We numerically and experimentally investigate graphene-based optical absorbers that exploit guided mode resonances (GMRs) achieving perfect absorption over a bandwidth of few nanometers (over the visible and near-infrared ranges) with a 40-fold increase of the monolayer graphene absorption. We analyze the influence of the geometrical parameters on the absorption rate and the angular response for oblique incidence. Finally, we experimentally verify the theoretical predictions in a one-dimensional, dielectric grating and placing it near either a metallic or a dielectric mirror.
Coherent perfect absorption (CPA) refers to interferometrically induced complete absorption of incident light by a partial absorber independently of its intrinsic absorption (which may be vanishingly small) or its thickness. CPA is typically realized in a resonant device, and thus cannot be achieved over a broad continuous spectrum, which thwarts its applicability to photodetectors and solar cells, for example. Here, we demonstrate broadband omni-resonant CPA by placing a thin weak absorber in a planar cavity and pre-conditioning the incident optical field by introducing judicious angular dispersion. We make use of monolayer graphene embedded in silica as the absorber and boost its optical absorption from ~1.6% to ~60% over a bandwidth of ~70 nm in the visible. Crucially, an analytical model demonstrates that placement of the graphene monolayer at a peak in the cavity standing-wave field is not necessary to achieve CPA, contrary to conventional wisdom.
Coherent perfect absorber (CPA) was proposed as the time-reversed counterpart to laser: a resonator containing lossy medium instead of gain medium can absorb the coherent optical fields completely. Here, we exploit a monolayer graphene to realize the CPA in a non-resonant manner. It is found that quasi-CPA point exists in the terahertz regime for suspending monolayer graphene, and the CPA can be implemented with the assistant of proper phase modulation among two incident beams at the quasi-CPA frequencies. The graphene based CPA is found of broadband angular selectivity: CPA point splits into two frequency bands for the orthogonal $s$ and $p$ polarizations at oblique incidence, and the two bands cover a wide frequency range starting from zero frequency. Furthermore, the coherent absorption can be tuned substantially by varying the gate-controlled Fermi energy. The findings of CPA with non-resonant graphene sheet can be generalized for potential applications in terahertz/infrared detections and signal processing with two-dimensional optoelectronic materials.
comments
Fetching comments Fetching comments
Sign in to be able to follow your search criteria
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا