Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userRotational optomechanical cooling of a nanofiber torsional modes
141
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Linearly polarized light can exert a torque on a birefringent object when passing through it. This phenomena, present in Maxwells equations, was revealed by Poynting and beautifully demonstrated in the pioneer experiments of Beth and Holbourn. Modern uses of this effect lie at the heart of optomechanics with angular momentum exchange between light and matter. A milestone of controlling movable massive objects with light is the reduction of their mechanical fluctuations, namely cooling. Optomechanical cooling has been implemented through linear momentum transfer of the electromagnetic field in a variety of systems, but remains unseen for angular momentum transfer to rotating objects. We present the first observation of cooling in a rotational optomechanical system. Particularly, we reduce the thermal noise of the torsional modes of a birefringent optical nanofiber, with resonant frequencies near 200 kHz and a Q-factor above $mathbf{2times10^4}$. Nanofibers are centimeter long, sub-micrometer diameter optical fibers that confine propagating light, reaching extremely large intensities, hence enhancing optomechanical effects. The nanofiber is driven by a propagating linearly polarized laser beam. We use polarimetry of a weak optical probe propagating through the nanofiber as a proxy to measure the torsional response of the system. Depending on the polarization of the drive, we can observe both reduction and enhancement of the thermal noise of many torsional modes, with noise reductions beyond a factor of two. The observed effect opens a door to manipulate the torsional motion of suspended optical waveguides in general, expanding the field of rotational optomechanics, and possibly exploiting its quantum nature for precision measurements in mesoscopic systems.
rate research
Read More
Light that carries linear or angular momentum can interact with a mechanical object giving rise to optomechanical effects. In particular, a photon transfers its intrinsic angular momentum to an object when the object either absorbs the photon or changes the photon polarization, as in an action/reaction force pair. Here, we present the implementation of light-induced selective resonant driving of the torsional mechanical modes of a single-mode tapered optical nanofiber. The nanofiber torsional mode spectrum is characterized by polarimetry, showing narrow natural resonances (Q$approx$2,000). By sending amplitude modulated light through the nanofiber, we resonantly drive individual torsional modes as a function of the light polarization. By varying the input polarization to the fiber, we find the largest amplification of a mechanical oscillation (>35 dB) is observed when driving the system with light containing longitudinal spin on the nanofiber waist. These results present optical nanofibers as a platform suitable for quantum spin-optomechanics experiments.
Phononic resonators play important roles in settings that range from gravitational wave detectors to cellular telephones. They serve as high-performance transducers, sensors, and filters by offering low dissipation, tunable coupling to diverse physical systems, and compatibility with a wide range of frequencies, materials, and fabrication processes. Systems of phononic resonators typically obey reciprocity, which ensures that the phonon transmission coefficient between any two resonators is independent of the direction of transmission. Reciprocity must be broken to realize devices (such as isolators and circulators) that provide one-way propagation of acoustic energy between resonators. Such devices are crucial for protecting active elements, mitigating noise, and operating full-duplex transceivers. To date, nonreciprocal phononic devices have not combined the features necessary for robust operation: strong nonreciprocity, in situ tunability, compact integration, and continuous operation. Furthermore, they have been applied only to coherent signals (rather than fluctuations or noise), and have been realized exclusively in travelling-wave systems (rather than resonators). Here we describe a cavity optomechanical scheme that produces robust nonreciprocal coupling between phononic resonators. This scheme provides ~ 30 dB of isolation and can be tuned in situ simply via the phases of the drive tones applied to the cavity. In addition, by directly monitoring the resonators dynamics we show that this nonreciprocity can be used to control thermal fluctuations, and that this control represents a new resource for cooling phononic resonators.
Optical nanofibers confine light to subwavelength scales, and are of interest for the design, integration, and interconnection of nanophotonic devices. Here we demonstrate high transmission (> 97%) of the first family of excited modes through a 350 nm radius fiber, by appropriate choice of the fiber and precise control of the taper geometry. We can design the nanofibers so that these modes propagate with most of their energy outside the waist region. We also present an optical setup for selectively launching these modes with less than 1% fundamental mode contamination. Our experimental results are in good agreement with simulations of the propagation. Multimode optical nanofibers expand the photonic toolbox, and may aid in the realization of a fully integrated nanoscale device for communication science, laser science or other sensing applications.
Radiation-pressure-induced optomechanical coupling permits exquisite control of micro- and mesoscopic mechanical oscillators. This ability to manipulate and even damp mechanical motion with light---a process known as dynamical backaction cooling---has become the basis for a range of novel phenomena within the burgeoning field of cavity optomechanics, spanning from dissipation engineering to quantum state preparation. As this field moves toward more complex systems and dynamics, there has been growing interest in the prospect of cooling traveling-wave phonons in continuous optomechanical waveguides. Here, we demonstrate optomechanical cooling in a continuous system for the first time. By leveraging the dispersive symmetry breaking produced by inter-modal Brillouin scattering, we achieve continuous mode optomechanical cooling in an extended 2.3-cm silicon waveguide, reducing the temperature of a band of traveling-wave phonons by more than 30 K from room temperature. This work reveals that optomechanical cooling is possible in macroscopic linear waveguide systems without an optical cavity or discrete acoustic modes. Moreover, through an intriguing type of wavevector-resolved phonon spectroscopy, we show that this system permits optomechanical control over continuously accessible groups of phonons and produces a new form of nonreciprocal reservoir engineering. Beyond this study, this work represents a first step towards a range of novel classical and quantum traveling-wave operations in continuous optomechanical systems.
We analyze theoretically the interplay between the torsional and the rotational motion of an aligned biphenyl-like molecule. To do so, we consider a transition between two electronic states with different internal torsional potentials, induced by means of a resonant laser pulse. The change in the internal torsional potential provokes the motion of the torsional wavepacket in the excited electronic state, modifying the structure of the molecule, and hence, its inertia tensor. We find that this process has a strong impact on the rotational wave function, displaying different behavior depending on the electronic states involved and their associated torsional potentials. We describe the dynamics of the system by considering the degree of alignment and the expectations values of the angular momentum operators for the overall rotation of the molecule.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
