Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userStatistical analysis of read-back signals in magnetic recording on granular media
171
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The comprehensive simulation of magnetic recording, including the write and read-back process, on granular media becomes computationally expensive if the magnetization dynamics of each grain are explicitly computed. In addition, in heat-assisted magnetic recording, the writing of a single track becomes a random process since the temperature must be considered and thermal noise is involved. Further, varying grain structures of various granular media must also be taken into account to obtain correct statistics for the final read-back signal. Hence, it requires many repetitions of the write process to investigate the mean signal as well as the noise. This work presents a method that improves the statistical evaluation of the whole recording process. The idea is to avoid writing the magnetization to one of its binary states. Instead, we assign each grain its probability of occupying one of its stable states, which can be calculated in advance in terms of a switching probability phase diagram. In the read-back process, we combine the probabilities to calculate a mean signal and its variance. Afterwards, repetitions on different media lead to the final read-back signal. Using a recording example, we show that the statistical behavior of the evaluated signal-to-noise ratio can be significantly improved by applying this probability mapping method, while the computational effort remains low.
rate research
Read More
The statistical behavior of weather variables of Antofagasta is described, especially the daily data of air as temperature, pressure and relative humidity measured at 08:00, 14:00 and 20:00. In this article, we use a time series deseasonalization technique, Q-Q plot, skewness, kurtosis and the Pearson correlation coefficient. We found that the distributions of the records are symmetrical and have positive kurtosis, so they have heavy tails. In addition, the variables are highly autocorrelated, extending up to one year in the case of pressure and temperature.
Enhancing light absorption in the recording media layer can improve the energy efficiency and prolong the device lifetime in heat assisted magnetic recording (HAMR). In this work, we report the design and implementation of a resonant nanocavity structure to enhance the light-matter interaction within an ultrathin FePt layer. In a Ag/SiO2/FePt trilayer structure, the thickness of the dielectric SiO2 layer is systematically tuned to reach maximum light absorption at the wavelength of 830 nm. In the optimized structure, the light reflection is reduced by more than 50%. This results in effective laser heating of the FePt layer, as imaged by an infrared camera. The scheme is highly scalable for thinner FePt layers and shorter wavelengths to be used in future HAMR technologies.
Electric signals have been recently recorded at the Earths surface with amplitudes appreciably larger than those hitherto reported. Their entropy in natural time is smaller than that, $S_u$, of a ``uniform distribution. The same holds for their entropy upon time-reversal. This behavior, as supported by numerical simulations in fBm time series and in an on-off intermittency model, stems from infinitely ranged long range temporal correlations and hence these signals are probably Seismic Electric Signals (critical dynamics). The entropy fluctuations are found to increase upon approaching bursting, which reminds the behavior identifying sudden cardiac death individuals when analysing their electrocardiograms.
The flicker-noise spectroscopy (FNS) approach is used to determine the dynamic characteristics of neuromagnetic responses by analyzing the magnetoencephalographic (MEG) signals recorded as the response of a group of control human subjects and a patient with photosensitive epilepsy (PSE) to equiluminant flickering stimuli of different color combinations. Parameters characterizing the analyzed stochastic biomedical signals for different frequency bands are identified. It is shown that the classification of the parameters of analyzed MEG responses with respect to different frequency bands makes it possible to separate the contribution of the chaotic component from the overall complex dynamics of the signals. It is demonstrated that the chaotic component can be adequately described by the anomalous diffusion approximation in the case of control subjects. On the other hand, the chaotic component for the patient is characterized by a large number of high-frequency resonances. This implies that healthy organisms can suppress the perturbations brought about by the flickering stimuli and reorganize themselves. The organisms affected by photosensitive epilepsy no longer have this ability. This result also gives a way to simulate the separate stages of the brain cortex activity in vivo. The examples illustrating the use of the FNS device for identifying even the slightest individual differences in the activity of human brains using their responses to external standard stimuli show a unique possibility to develop the individual medicine of the future.
Bit Patterned Media (BPM) for magnetic recording provide a route to densities $>1 Tb/in^2$ and circumvents many of the challenges associated with conventional granular media technology. Instead of recording a bit on an ensemble of random grains, BPM uses an array of lithographically defined isolated magnetic islands, each of which stores one bit. Fabrication of BPM is viewed as the greatest challenge for its commercialization. In this article we describe a BPM fabrication method which combines e-beam lithography, directed self-assembly of block copolymers, self-aligned double patterning, nanoimprint lithography, and ion milling to generate BPM based on CoCrPt alloys. This combination of fabrication technologies achieves feature sizes of $<10 nm$, significantly smaller than what conventional semiconductor nanofabrication methods can achieve. In contrast to earlier work which used hexagonal close-packed arrays of round islands, our latest approach creates BPM with rectangular bitcells, which are advantageous for integration with existing hard disk drive technology. The advantages of rectangular bits are analyzed from a theoretical and modeling point of view, and system integration requirements such as servo patterns, implementation of write synchronization, and providing for a stable head-disk interface are addressed in the context of experimental results. Optimization of magnetic alloy materials for thermal stability, writeability, and switching field distribution is discussed, and a new method for growing BPM islands on a patterned template is presented. New recording results at $1.6 Td/in^2$ (teradot/inch${}^2$, roughly equivalent to $1.3 Tb/in^2$) demonstrate a raw error rate $<10^{-2}$, which is consistent with the recording system requirements of modern hard drives. Extendibility of BPM to higher densities, and its eventual combination with energy assisted recording are explored.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
